Panasonic Digital Camera Dmc G85 Owners Manual

							261
10. Using the Wi-Fi function
Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap 
Movie] function  (P174). Music can be added to motion pictures to be combined. In 
addition, you can save the combined motion picture or upload it  on a web service.
ARecord motion pictures with [Snap Movie].
B Send the recorded motion pictures.
C Edit the motion pictures.
D Combine the motion pictures, save the combined motion picture,  and send it to a web 
service.
E Combine the motion pictures, and save the combined motion pictu re.
∫Combining motion pictures by operating a smartphone
1Connect to a smartphone.  (P253)2Operate the smartphone.
•
[Snap Movie] of the “ Image App ” requires a smartphone that supp orts Android OS 4.3 or 
higher.
•The iPhone 4 does not support [Snap Movie] of the “ Image App ”.
Combining motion pictures recorded with Snap Movie according to  
your preference on a smartphone/tablet
1 Select  [ ].
2 Select [Snap Movie].
•
[Snap Movie] motion pictures with recent recording dates will b e selected and 
automatically sent to the smartphone.
•When motion pictures with recent recording dates are not availa ble, a screen that 
lets you select motion pictures will be displayed. Select motio n pictures and send 
them.
3 Edit the motion pictures.
•
Operate the smartphone to edit the motion pictures, such as rea rranging them, 
deleting those that are unnecessary or adding music to them.
•You can combine the edited motion pictures and save the combine d file on the 
smartphone or upload it on a web service.
•Read the [Help] in the “ Image App ” menu for further details on  how to operate.
 

 
						

							10. Using the Wi-Fi function
262
Displaying pictures on a TV
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P280)
3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To terminate the connection, follow the steps below:
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [Yes]
(You can also terminate the connection by pressing [Wi-Fi].  (P251))
•If you display pictures using the Wi-Fi function, they cannot b e output in 4K resolution. To 
output them in 4K resolution, connect the camera and the TV wit h an HDMI micro cable. (P290)
•When a TV is connected to this unit, the TV screen may temporar ily return to the status before 
the connection. Pictures are displayed again when you take or p lay back pictures.
•[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures and 4K burst files cannot be played back.•During Multi Playback, Calendar Playback or when you select the  focus area of an image 
recorded with the Post Focus function, the image displayed on t he camera is not displayed on 
the TV.
You can display pictures on a TV that supports the 
Digital Media Renderer (DMR) function of the DLNA 
standard.
Preparations
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Playback on TV]MENU
MENU 
						

							263
10. Using the Wi-Fi function
Sending images
When sending images, select the method for sending them after selecting [New 
Connection].
After the connection has been completed, settings for sending,  such as the image size for 
sending, can also be changed.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if th e file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3 Excluding motion pictures recorded with their size set to [4K]  in [Rec Quality]
•Some images may not be played back or sent depending on the dev ice.
•Refer to the manual of the destination equipment or the web service for more information on 
how to playback pictures.
DestinationJPEGRAWMP4¢ 1AVCHD¢1, 24K Burst File¢ 1
Images recorded with the 
Post Focus function¢ 13D
[Smartphone] (P267) ±—±
¢3———
[PC] (P270) ±± ± ± ±±
[Cloud Sync. Service]  (P275) ±
—±
¢3—— ±
[Web service] (P272) ±—±
¢3—— ±
[AV device] (P269) ±—— — —±
[Printer]
¢ 1 (P268) ±—— — —— 
						

							10. Using the Wi-Fi function
264
A picture can be automatically sent to a specified device every time you take it.
•When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
•To terminate the connection, follow the steps below:
>   [Setup]  > [Wi-Fi] > [Wi-Fi Function]  > [Yes]
•You can terminate the connection or change the send settings 
by pressing [Wi-Fi].  (P251)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
•Since the camera gives priority to recording, sending may take longer during the recording.•If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will 
not be resent.
•You may not be able to delete files or use the playback menu wh ile sending.
Not available in these cases:
•
You cannot send motion pictures, 4K burst files and images reco rded with the Post Focus 
function.
Send Images While Recording
55MENU 
						

							265
10. Using the Wi-Fi function
Images can be selected and sent after recording.
∫How to select an image(s) after selecting [Single Select] or [M ulti Select] 
•
Details of the playback menu [Favorite] or [Print Set] settings  will not be sent.
Not available in these cases:
•
Some images taken with a different camera may not be able to be  sent.•Images that have been modified or edited with a computer may no t be able to be sent.
Send Images Stored in the Camera
[Single Select] setting
1Select the picture.
2Select [Set].
[Multi Select] setting
1Select the picture.  (repeat)
•The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi Select] 
is limited.
•To change the send settings on a screen that is displayed after  the image has been sent, 
press [DISP.]. To terminate the connection, select [Exit].
6HW
2. 
						

							10. Using the Wi-Fi function
266
Pressing [DISP.] after completing a connection allows you to change the settings for 
sending such as the image size for sending.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when the destination is set to [PC].
¢ 3 Only available when the destination is set to [Cloud Sync. Ser vice] or [Web service].
¢ 4 Only available when the destination is set to [Cloud Sync. Ser vice].
Changing the settings for sending images
[Size]Resize the image to send.
[Original]/[Auto]
¢
1/[Change]
•If you select [Auto], the image size is determined by the 
circumstances at the destination.
•You can select the image size for [Change] from [M], [S] or [VG A].
The aspect ratio does not change.
[File Format]¢ 2[JPG]/[RAW iJPG]/[RAW]
[Delete Location 
Data]¢3
Select whether to delete the location information from images b efore 
sending them.
[ON]: Delete the location information, then send.
[OFF]: Keep the location information and send.
•This operation only deletes the location information from the i mages 
that are set to be sent.
(The location information will not be deleted from the original  images 
stored in this unit.)
[Cloud Limit]¢ 4
You can select whether to send images when the Cloud Folder run s 
out of free space.
[ON]: Do not send images.
[OFF]: Delete images from the oldest ones, then send new images. 
						

							267
10. Using the Wi-Fi function
Sending images to a smartphone/tablet
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P280)
3Select a device you want to connect.4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P266)
Preparations
•
Install the “ Image App ” in advance. (P252)
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and se t.
3 Start “ Image App ”.  (P252)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Dir ect]:
1 Start “ Image App ”.  (P252)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of  this unit.
3 Start “ Image App ”.  (P252)
5When [Send Images While Recording] has been selected
Take pictures. (P264)
When [Send Images Stored in the Camera] has been selected
Select the picture.  (P265)
MENU 
						

							10. Using the Wi-Fi function
268
Printing Wirelessly
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P280)3Select a printer you want to connect.
4Select pictures, and then print.
•The procedure for selecting pictures is the same as the one for  when the USB connection 
cable is connected.  (P301)
•To terminate the connection, press [ ].
(You can also terminate the connection by pressing [Wi-Fi].  (P251))
Not available in these cases:
•
Motion pictures, 4K burst files, and images recorded with the Post Focus function cannot be 
printed.
You can send images to a compatible printer, and print 
them wirelessly.
Preparations
To print out recorded pictures wirelessly, you must use a print er that supports PictBridge 
(wireless LAN)
¢.¢ Compliant with the DPS over IP standards.
•For details on the PictBridge (wireless LAN-compatible) printer , contact the respective 
company.
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images Stored in the Camera]  > [Printer]MENU 
						

							269
10. Using the Wi-Fi function
Sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV 
devices).
1Select the menu.  (P51)
2Select [Via Network] or [Direct], and connect.  (P280)3Select a device you want to connect.
4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P266)
•Sending may fail depending on the operational status of the AV  device. Also, sending may take 
a while.
A
Wireless access point BHome AV device
Preparations
When sending a picture to AV devices, set your device to DLNA w aiting mode.
•
Read the operating instructions of your device for details.
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[AV device]
5When [Send Images While Recording] has been selected
Take pictures.  (P264)
When [Send Images Stored in the Camera] has been selected
Select the picture.  (P265)
MENU 
						

							10. Using the Wi-Fi function
270
Sending images to PC
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attemp t to create a receive folder 
may fail if the account includes non-alphanumeric characters.
∫ When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.  (P295)2Create a folder that receives images with “ PHOTOfunSTUDIO ”.
•To create the folder automatically, select [Auto-create]. To specify a folder, create a new 
folder, or set a password to the folder, select [Create manuall y].
•For details, refer to the operating instructions of “ PHOTOfunST UDIO ” (PDF).
∫When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows 7/Windows 8/Windows 8.1/Windows 10
Example: Windows 7
1Select a folder you intend to use for receiving, then right-cli ck.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
You can send pictures and motion pictures recorded 
with this unit to a PC.
Preparations
(On the camera)
•
If the workgroup of the destination PC has 
been changed from the standard setting, you 
also need to change the setting of this unit in 
[PC Connection]. (P286)(On your PC)
•Turn the computer on.
•Prepare folders for receiving images on the 
PC before sending a picture to the PC. 
(P270)
To create a folder that receives images