Panasonic Digital Camera Dmc G85 Owners Manual

221
9. Using Menu Functions
[Monitor Display]/
[Viewfinder]Brightness, color, or red or blue tint of the Monitor/
viewfinder is adjusted.
1Select the settings by pressing 
3/4, and 
adjust with  2/1 .
•
Adjusting can also be performed by rotating the rear 
dial.
2Press [MENU/SET] to set.
•It will adjust the monitor when the monitor is in use, and 
the viewfinder when the viewfinder is in use.
•Some subjects may appear differently from actuality on 
the monitor. However, this does not affect the recorded...

9. Using Menu Functions
222
[Economy]
[Sleep Mode]:The camera is automatically turned off if the camera has 
not been used for the time selected on the setting.
[Sleep Mode(Wi-Fi)]:The camera is automatically turned off if it is not connected 
to a Wi-Fi network and has not been used for 15 minutes 
(approx.).
[Auto LVF/Monitor Off]:The monitor/viewfinder is automatically turned off if the 
camera has not been used for the time selected on the 
setting.
[Power Save LVF Shooting]:
If you enable the...

223
9. Using Menu Functions
[USB Mode]Sets the communication method when connecting using 
the USB connection cable (supplied).
y
 [Select on connection]:Select this setting to select the USB communication 
system when connecting to another device.
{ [PictBridge(PTP)]:Select this setting when connecting to a printer supporting 
PictBridge.
z [PC]:Select this setting to export images to a connected PC. s
[TV Connection]
[HDMI Mode (Play)]:Set the format for the HDMI output when playing back on 
the HDMI...

9. Using Menu Functions
224
[TV Connection]
(continued)
[HDMI Info Display (Rec)]:Sets whether or not to display information when you take 
pictures while monitoring the camera image on a device 
(TV, etc.) connected with an HDMI micro cable.
•When the camera is connected to a TV, lower the volume 
of the TV.P291
[3D Playback]:Set the output method for 3D pictures.
[]:Set when connecting to a 3D compatible television.
[]:
Set when connecting to a television not compatible with 
3D.
Set this when you...

225
9. Using Menu Functions
[No.Reset]
Reset the file number of the next recording to 0001.
•The folder number is updated and the file number starts 
from 0001.
•A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. 
We recommend formatting the card (P27) after saving the 
data on a PC or elsewhere.
•To reset the folder number to 100, format the card first 
and then use this function to reset the file number.
A reset screen for the folder number...

9. Using Menu Functions
226
[Pixel Refresh]It will perform optimization of imaging device and image 
processing.•Imaging device and image processing is optimized when 
the camera is purchased. Use this function when bright 
spots that do not exist in the subject get recorded.
•Turn the camera off and on after the pixels are corrected. s
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have 
affixed to the front of the imaging device is performed.•Dust Reduction Function will operate...

227
9. Using Menu Functions
•The [Playback] menu items below save edited images as new files. If the card is full, new 
images cannot be created. We recommend that you check the card  capacity in advance.
–[RAW Processing]/[4K PHOTO Bulk Saving]/[Light Composition]/[Clear Retouch]/[Text 
Stamp]/[Time Lapse Video]/[Stop Motion Video]/[Resize]/[Croppin g]
•The camera may not play back images recorded on other devices c orrectly, and the functions 
of the camera may not be available for the images....

9. Using Menu Functions
228
∫How to select an image(s) after selecting [Single] or [Multi] 
•When [Single] and [Multi] are not available, select an image in  the same way as when [Single] 
is selected.
[Single] setting1Press  2/1  to select the picture.2Press [MENU/SET].
•If [Set/Cancel] is displayed at the right bottom of the 
screen, the setting is canceled when [MENU/SET] is 
pressed again.
[Multi] setting
When a screen similar to the one on the right is displayed:
1Press  3/4/ 2/1 to select the...

229
9. Using Menu Functions
Playback methods for the 3D pictures can be switched.>  [Playback]  > [2D/3D Settings]
•
This is a menu that is only displayed when 3D playback is possi ble. (P304)
You can play back the pictures you have taken in synchronization with music, and you can 
do this in sequence while leaving a fixed interval between each  of the pictures.
You can also put together a slide show composed of only still p ictures, only motion 
pictures, etc.
We recommend this feature when you view...

9. Using Menu Functions
230
∫Changing the slide show settings
You can change the settings for slide show playback by selectin g [Effect] or [Setup] on the 
slide show menu screen.
•
Even if you select [Effect], it does not work during slide show s of 4K burst files, images 
recorded with the Post Focus function, or group pictures.
•When playing back the following pictures, the [Duration] settin g is disabled.
–Motion pictures–4K burst files–Images recorded with the Post Focus function
–Panorama...