Panasonic Digital Camera Dmc G85 Owners Manual

211
9. Using Menu Functions
[AF Assist Lamp]
(continued)
•The AF Assist Lamp gets slightly blocked when the 
interchangeable lens (H-FS12060/H-FS14140/
H-FS1442A) is used, but it does not affect the 
performance.
•The AF Assist Lamp may be greatly blocked, and it may 
become harder to focus when a lens with large diameter 
is used.
•The setting is fixed to [OFF] in the following cases.
–[Distinct Scenery]/[Bright Blue Sky]/[Romantic Sunset 
Glow]/[Vivid Sunset Glow]/[Glistening Water]/[Clear...

9. Using Menu Functions
212
[AF+MF]When AF Lock is ON (press the shutter button halfway with 
the focus mode set to [AFS] or set AF Lock using [AF/AE 
LOCK]), you can make fine adjustments to the focus 
manually. s
[MF Assist]Sets the display method of MF Assist (enlarged screen).
•Available settings vary depending on the lens used.
When an interchangeable lens having a focus ring 
(H-FS12060/H-FS14140/H-FS1442A) is used
[]:The screen is enlarged by operating the focus ring or the 
focus lever of the...

213
9. Using Menu Functions
[Peaking]In-focus portions (portions on the screen with clear 
outlines) are highlighted when focus is being adjusted 
manually.
•When [Detect Level] in [SET]
 is set to [HIGH], portions to 
be highlighted are reduced, allowing you to achieve a 
more precise focus.
•Changing the [Detect Level] setting also changes the 
[Display Color] setting as follows.
•Each time [ ] in [ ] is touched, the setting is switched 
in order of [ON] ([Detect Level]: [LOW]) > [ON] 
(
[Detect...

9. Using Menu Functions
214
[Histogram]This allows you to set either to display or not display the 
histogram.
You can set the position by pressing 
3/4/ 2/1.
•Direct touch operation is also possible from the recording 
screen.
•A histogram is a graph that 
displays brightness along the 
horizontal axis (black to white) 
and the number of pixels at each 
brightness level on the vertical 
axis.
It allows you to easily check a picture’s exposure.
A dark
B bright
•When the recorded picture and the histogram...

215
9. Using Menu Functions
[Highlight]When the Auto Review function is 
activated or when playing back, white 
saturated areas appear blinking in 
black and white.•If there are any white saturated areas, we recommend 
compensating the exposure towards negative 
(P106) 
referring to the histogram  (P214) and then taking the 
picture again. It may result in a better quality picture.
•This function is disabled during 4K photo playback, 
playback of images recorded with the Post Focus 
function, Multi...

9. Using Menu Functions
216
[Monochrome Live 
View]You can display the recording screen in black and white. 
This function is convenient when a black and white screen 
will make it easier to set focus with Manual Focus.
•Even if you use the HDMI output during recording, this 
function will not work for the connected device.
•Recorded images will not be affected.
s
[Constant Preview]
You can check the effects of the chosen aperture and 
shutter speed on the recording screen in Manual Exposure 
Mode.
•This...

217
9. Using Menu Functions
[Rec Area]This changes the angle of view during motion picture 
recording and still picture recording.•The recording area indicated is an approximation.•[Rec Area] is not available when recording is performed 
with the 4K Photo or Post Focus function. s
[Remaining Disp.]
This will switch display betwe
en the number of recordable 
pictures and available recording time.•[9999 i] is displayed if there are 10000 or more pictures 
remaining. s
[Auto Review]Displays a picture...

9. Using Menu Functions
218
[Eye Sensor]Setting the eye sensor sensitivity and the method for 
switching between the monitor and viewfinder.
P38
[Touch Settings]Enables/disables the Touch operation.
[Touch Screen]:All touch operations.
[Touch Tab]:Operations of tabs, such as [ ] on the right side of the 
screen.
[Touch AF]:Operation to bring the subject you touch into focus ([AF]) 
or adjust the focus and brightness ([AF+AE]).
[Touch Pad AF]:Operation to move the AF area by touching the monitor 
when the...

219
9. Using Menu Functions
: [Setup] menu
> [Setup]
[Online Manual][URL display]/[QR Code display]s
[Clock Set] Setting Date/Time. P34
[World Time]Sets the times for the region where you live and your 
holiday destination.
•[Destination] can be set after setting up [Home].
After selecting [Destination] or [Home], press 
2/1  
to select an area, and press [MENU/SET] to set.
“  [Destination]:
Travel destination area
A Current time of the 
destination area
B Time difference from 
home area
–  [Home]:
Your...

9. Using Menu Functions
220
[Travel Date]
(continued)
•You can display the elapsed days and travel destination 
during playback or stamp them on recorded pictures in 
[Text Stamp] (P239).
•The elapsed days and travel destination can be printed 
out using the software “ PHOTOfunSTUDIO ” (P295).
•The travel date is calculated using the date in the clock 
setting and the departure date you set. If you set [World 
Time] to the travel destination, the travel date is 
calculated using the date in the clock...