Panasonic Digital Business System Section 300 Installation Guide

FF 1 Kev Svstem Programming V2.0 
MULTI-LINE KEY FEATURES 
0#: No intercom-HOLD recall 
l#: 20 seconds 
2#: 40 seconds 
Attendant 
3#: 60 seconds 
4#: 80 seconds 
5#: 100 seconds 
6#: 120 seconds 
7#: 140 seconds 
8#: 160 seconds 
9#: 180 seconds 
lO#: 200 seconds 
1 l#: 220 seconds 
12#: 240 seconds INTERCOM HOLD-RECALL TIMER 
FFl-3X-22+(0 
or 1-12)X 
0#: No intercom-HOLD recall 
l#: 20 seconds 
2#: 40 seconds 
Extensions 
3#: 60 seconds 
4#: 80 seconds 
5#: 100 seconds 
6#: 120 seconds 
7#: 140 seco...

: , 
FF 1 KEY 
SYSTEM PROGRAMMING 
v2.0  

FF 1 Key System Programming V2.0 
t’ ‘ 
i  
MULTI-LINE KEY FEATURES 
Intercom Recall 
Timers 
Intercom Transfer-Recall Timers 
If a transferred intercom call does not 
respond after a preset time, a recall 
signal will sound. 
The time for the 
begining of the signal is programmable. 
The Attendant and the Extensions are 
each set separately. 
O#: No intercom-transfer recall Attendant J#: 20 seconds 
2#: 40 seconds 
3#: 60 seconds 
4#: 80 seconds 
5#: 100 seconds 
6#: 120 seconds 
7#: 140 seconds 
8#:...

FF 2 KEY 
TRUNK PROGRAMMING 
v2.0  

FF 2 Trunk Prograryming V2.0 
TRUNK CARDS 
LOOP-START/GROUND-START/DIRECT-IN-DIAL TRUNK CARDS 
FF2-(Ol-f34)#-21X-(O-2)# 
Ok L.ooD-start trunk 
l#: Ground-start trunk 
2% DID trunk There are three types of trunks: Loop-start. 
Ground-start and Direct-in-Dial (DID). 
When installing a DID trunk. check the 
parameters for Immediate or Wink start. 
Also check the parameters for the Wink-Start 
Timer, Dial Time Out for Digits and the DID 
Interdigit Dial Time Out. 
See also following pages. 
Page 18  

FF 2 Key Trunk Programming V2.0 
DIRECT-IN-DIAL (DID) 
DID - IMMEDIATE OR WINK START 1 
FF2-(Ol-64)#-22%(0 or l)% 
Q#: Wink start 
l#: Immediate start 
Immediate Start - After comxcting with a distant 
switching system. the 
DBS system will wait 65 
milliseconds before accepting the digits of a dialed 
number. 
WinIs 
Start - The DBS system waits for a 
momentary signal hink~ before accepting the digits 
of a dialed number. 
WIN-K-START 
TIMER 
0#: 
140 milliseconds 
l#: 160 msec 
2#: 180 msec 1 
3#: 200...

FF 2 Kev Trunk Programming V2.0 
DIRECT-IN-DIAL (DID) 
DIAL TIME OUT FOR DIGITS 
FF2-(Ol-64)%-24#-(0 
or l-15)% 
O#: No time out 
l#: 15 seconds 
2#: 16 seconds 
3#: 17 
seconds 
4% 18 seconds 
5#: 19 seconds 
6#: 20 seconds 
7#: 21 seconds 
8#: 22 seconds 
9#: 18 seconds 
lO#: 18 seconds 
ll#: 18 seconds 
12#: 18 seconds 
13#: 18 seconds 
14#: 18 seconds 
15#: 18 seconds Maximum amount of time before a time-out 
signal. indicating an incomplete dialed 
number. is sent from the telephone 
company’s...

FF 3 KEY 
EXTENSION 
PROGRAMMING 
v2.0  

FF 3 Kev Extension Programming V2.0 
EXTENSION PROGIMMMING 
TELEPHONE TYPES 
FF3-(001-144)X-2%-(0 or l-19)% 
Ok No assignment 
l#: Analog telephone 
2#: Digital telephone (FF 6 key) 
3#: Digital telephone (FF 12 key) 
4#: Digital telephone (FF 24 key) 
5#: Reserved 
6#: Reserved 
7#: EM/24 W-43310 
8#: OPX (pulse) 
9#: OPX (tone) 
lO#: Voice mail &EC) 
1 l#: DSSl - Extension lOO/ 10 
12#: DSS2 - Extension lOO/lO 
13#: DSS3 - Extension 10 l/ 11 
14#: DSS4 - Extension 101/l 1 
15#: Voice mail (OPXI 
CPGB,...

FF 3 Key Extension Programming V2.0 
DIRECT-IN-DIAL (DID) i -*. 
 
DID DIAL OUTSIDE TELEPHONE NUMBER 
FF3-(OOl-144)#-35#-(0000-9999)# 
A signal is sent from the DID CO-trunk 
QOOO#: Default line to the DBS system and converted to 
0000-9999#: Outside telephone number a DBS extension number. The parameters 
represent the last four digits of the DID 
outside telephone number. 
RINGBACK TONE WITH BUSY SIGNAL 
RINGBACK TONE WITH BUSY SIGNAL 
FF3-(OOl-144)#-36#-(0-2)X 
Q#: Rirwback tone with busv siQnd 
l#:...