Panasonic Cz Rtc2 Instructions Manual

ES
RU
UK
GR
PT
IT
DE
FR
ENTimer Remote Controller  INSTRUCTION MANUAL
Save These  Instructions!
Conserver ce mode d’emploi!
Diese Anleitung aufbewhren!
Conservare queste istruzioni!
Guarde estas instruções!
Εκτός αττό αυτές τις οδηγίες!
Guarde estas instruccónes!
Сохраните эту инструкцию!
Збережіть ці інструкції!
Télécommande de minuterie  MANUEL D’INSTRUCTIONS
Zeitschaltuhr-Fernbedienung BEDIENUNGSANLEITUNG
Telecomando del timer  MANUAL DI ISTRUZIONI
Controlador remoto do temporizador  MANUAL DE...

15 141617237 252
29 26 0 38218192 212
20 24
1212573869311041113
8 10
9
13
11 12
1
3
4
7 2
5
6
Display/Af chage/Anzeige/Display/Mostrador/Οθόνη ενδείξεων
/
Pantalla/Дисплей
/ДисплейOperating buttons/Boutons de fonctionnement/
Bedienungstasten/Tasti per il funzionamento/Botões de 
funcionamento/Κουμπιά χειρισμού
/Botones de 
funcionamiento/Кнопки управления
/Кнопки управління
III
$;35$@$PWFSJOEE


$;35$@$PWFSJOEE








 

EN-1
EN
1. Important Safety Instructions
Before using the system, be sure to read these “Important Safety Instructions”.
After reading this manual, save it in a convenient place.
 Warning
Installation Precautions
 Do not install by yourself.
  Installation should always be performed by your 
dealer or a professional service provider. 
  Electric shock or  re may result if an 
inexperienced person performs any installation 
or wiring procedures incorrectly.
 Use only speci ed air conditioners.
  Always...

EN-2
2. Names and Operations
1.  (Start/Stop) button
Pushing this button starts, and pushing again 
stops the unit.
2. Operation lamp
The lamp is turned on when an air conditioner 
is in operation.
This lamp blinks when an error occurs or a 
protective device is activated.
3. 
 (Mode select) button
Pushing this button selects an operation 
mode. (AUTO
 /HEAT /DRY /COOL / 
FA N).
4.  Temperature setting buttons
Changing the temperature setting.
5. 
 (Fan speed) button
Changing the fan speed.
6....

EN-3
EN
11.  Upper and lower limit indication of the 
outing function
: Indicates the upper limit of the 
temperature
: Indicates the lower limit of the 
temperature
12.  Operation Mode indication
Displays the selected operation mode.
(AUTO
 /HEAT /DRY /COOL / 
FA N ).
13. Temperature indication
Indicates the set temperature.
14.  ˚F / ˚C (Temperature unit) indication
15. 
 (Remote control sensor) indication
Appears when the remote control sensor is 
used.
16. 
 (Centralized control) indication
Appears...

EN-4
17.  (Operation mode change control) 
indication
Displays when an operation mode is entered 
by the remote control unit, while another 
operation mode has been already selected. 
This indicates that the operation mode cannot 
be changed.
18. 
 (Disabled feature) indication
Displayed if the selected feature was disabled 
during installation.
19. 
 Peak cut mode (Demand)/GHP 
operation standby indication
Appears during the peak cut mode (Demand) 
if an electric heat pump (EHP) air conditioner 
is used...

EN-5
EN
1.  Press and hold  for more than 2 seconds to enter the 
present day and time setting mode.
Once you enter the setting mode, 
, “”(day) and 
“time”  ash.
2. Set “
” to today’s day of the week.
Press 
 *1  to move “” ( ashing on the 
display) in the order of : Su 
→ Mo 
→ Tu  
→ .... Press  
to move it in the order of : Su 
→ St 
→ Fr 
→ .... 
*1 While in time setting mode, the Temperature setting
  buttons function as   (changing day) button.
3. Press 
 /  to change the present “hour” in the...

EN-6
Checking Weekly Timer
Set the weekly program assigning a given timer to each day of the week. 
Maximum of 6 programs a day and 42 programs a week can be set.
Select the day and the TIMER number you want to program. 
4. Weekly Program Function
Vertical scale indicates the 
TIMER No., and horizontal scale 
indicates the day.
*  If the day is changed, the 
TIMER No. returns to “1”.
1. Press 
 to enter the program confi rmation mode
 “” and start setting.
Once you enter the program con rmation mode, the...

EN-7
EN
•  Changing the Program Timer
To set the weekly program, follow the steps below.
1.  Select the program you want to set in the program 
confi rmation mode, and press 
. This enters the 
setting mode of the program currently displayed.
*  In the program setting mode, 
, “hour”, “minute”
and “item”  ash on the display.
2.  Set the “hour”. (program step 1)
Press 
 /  to set the “hour”.
Con rm the “hour” and press . This enters the program changing 
mode  (setting of the “minute”).
3.  Set the...

EN-8
Select the program pattern and press . The program timer setting is con rmed and the unit enters the 
con rmation mode .
Note 
 If you press  during the setting, it returns to the program con rmation mode.
 If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid. Pattern 1
Pattern 2
Pattern 3
Pattern 4 4. Weekly Program Function (Continued)
4.  Set the program pattern. 
(program step 3)
There are 4...