Panasonic Convertible Camera Aw E300 Operating Instructions
Have a look at the manual Panasonic Convertible Camera Aw E300 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$1Color Bar Setup Setting [Color Bar Set: 0.0IRE/
7.5IRE]
The setup level of color bar can be adjusted.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can...](http://img.usermanuals.tech/thumb/58/68112/w64_aw-e300_en_om_d-44.png "Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$1Color Bar Setup Setting [Color Bar Set: 0.0IRE/
7.5IRE]
The setup level of color bar can be adjusted.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can...")
![Page 46
-44-
%2Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%3Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $5is at HIGH or LOW.
%4Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $8Noise Suppress Compensation Level...](http://img.usermanuals.tech/thumb/58/68112/w64_aw-e300_en_om_d-45.png "Page 46
-44-
%2Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%3Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $5is at HIGH or LOW.
%4Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $8Noise Suppress Compensation Level...")
![Page 47
-45-
%5Color Matrix Compensation Level Setting
[Matrix (R-G) / (R-B) / (G-R) / (G-B) / (B-R) / (B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and...](http://img.usermanuals.tech/thumb/58/68112/w64_aw-e300_en_om_d-46.png "Page 47
-45-
%5Color Matrix Compensation Level Setting
[Matrix (R-G) / (R-B) / (G-R) / (G-B) / (B-R) / (B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and...")
![Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
qwe
(2) Press the YES/ABC switch...](http://img.usermanuals.tech/thumb/58/68112/w64_aw-e300_en_om_d-47.png "Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
qwe
(2) Press the YES/ABC switch...")
-49-Convertible Camera AW – FOCUS LOCK 87A00001SER NO – +MENU ITEM/AWC YES/ABC NO/BAROPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN 146 (5-3/14) 10 (25/64) 77 (3-1/32)10 (25/64) 1(3/64) 84 (3-5/16) APPEARANCE mm (inch)
-50- Pickup element: 1/3 interline, supersensitive CCDx3 Pixels: 768 (H) x 494 (V) pixels Scanning: 2:1 interlace System: NTSC Scanning frequency: 15.734 kHz (horizontal), 59.94 Hz (vertical) Lens mount: 1/3 C mount Synchronizing: Internal or external External sync input: BB, (BNC,50P D subconnector) Sensitivity: 2 000 lx, F8, 3 200 K Minimum illumination: 1.5 lx, F1.4, Night Eye mode Signal-to-noise ratio: 63 dB (DNR ON) Horizontal resolution: 800 TV lines (high band, DTL ON) Registration: 0.05 % Contour correction: Horizontal and vertical White balance: Auto (2 memories), 3 200 K,5 600 K, FINE MENU, ATW Black balance: AUTO Color bar: SMPTE color bar (Setup 0/7.5) Shutter speed: Synchro Scan: 60.34 Hz-15.75 kHz Step shutter: OFF 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000s ELC Gain: AGC LOW/HIGH, 0 - 30 dB, NIGHT EYE Gamma correction: ON/OFF switchable Iris: AUTO, MENU Video output: Composite: 1 V[p-p] (75 ½) (BNC, 50P D subconnector) Y: 1 V[p-p] (75 ½) (50P D subconnector) C: Same as VBS chroma level (75 ½) (50P D subconnector) Use mode: Halogen, Fluorescent, Outdoor, UserSPECIFICATIONS
-51- Switches: BACK PANEL: MENU, ITEM/AWC, YES/ABC, NO/BAR MENU ITEM SETTING: Gain, Shutter, White Balance, Detail Level (OFF/LOW/HIGH), Corner Detail, Precision Detail Level, Black Stretch, High Light Chroma, Skin Color Detail, Photometric Measurement Method (ALL/CENTER/TOP CUT/BOTTOM CUT/R/L CUT) CCD Read Out Mode (FIELD/FRAME 1/FRAME 2) Creen DNR, Color Bar Setup, Use Mode, Nega/Posi, PC Control Access Speed Adjustment function: MENU ADJUSTMENT: R/B Gain, R/B Pedestal, Black Level, Video Level, Detecting Ratio, Genlock Horizontal Phase/Color Phase, Gamma Compensation Level, Knee Compensation Level, White Clip Level, Horizontal Detail Level, Vertical Detail Level, Detail Band Level, Noise Suppress Compensation Level, Level Dependent Compensation Level, Chroma Detail Compensation Level, Dark Detail Compensation Level, Matrix Compensation Level, Flare Correction Level Source voltage: DC 12 V Power consumption: 9.6 W Operating temperature:-10°C to +45°C (14°F to +113°F) Operating humidity: 30 % to 90 % Dimensions: 84 (W) x 77 (H) x 146 (D) mm [3-5/16” x 3-1/32” x 5-3/4”] Weight: 0.7 kg Weight and dimensions indicated are approximate. Specifications are subject to change without notice.
-52- Pan/Tilt Unit AW-PH300 Pan/Tilt Unit AC Adaptor AW-PS300 Hybrid Control Panel AW-RP501 Multi Hybrid Control Panel AW-RP505 Multi Port Hab AW-HB505 Control Panel AC Adaptor AW-PS301 AC Adaptor AW-PS505 Remote Control Unit WV-RC700A WV-RC550 Remote Control Box WV-CB700A Camera Mounting Bracket WV-831 RCU Rack Mount Frame WV-Q70 VF Mounting Bracket AW-Q40 Connection Cable WV-CA9T5 (D sub 9p-BNC, approx. 5 m)Studio Cable WV-CA26U15 WV-CA26U30 WV-CA26U100 Cable Joint Adaptor WV-CA26T26 RCB Cable AW-CA50T10 RCU Cable AW-CA50A26 Pan/Tilt Unit Cable AW-CA50T15 PC Control Camera Pan/Tilt Unit Cable AW-CA50A15 PC Control Pan/Tilt Unit Cable AW-CA28T9 PC Control Connection Cable AW-CA50T9 DC Power Cable AW-CA4T1 RGB Cable AW-CA50T6 Studio Card (RGB, YPr-YP bOutputs) AW-PB301 Studio Card AW-PB305 RGB Card AW-PB302 C Mount Zoom Lens (14X) AW-LZ14MD55 C Mount Zoom Lens (10X) AW-LZ10MD6 C Mount Studio Lens (14X) AW-LZ14ST55 Body cap ..................................................................... 1 Rubber Sheet ............................................................... 1 STANDARD ACCESSORIESOPTIONAL ACCESSORIES
N0998-0 7J1A170A Printed in Japan
N22
Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of AmericaExecutive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094
Regional Offices:
EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620
CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200
SOUTHERN ZONE:
Atlanta Region: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024
Panazip 11 (770) 338-6841, fax (770) 338-6741
Law Enforcement Video Products: 1225 Northbrook Parkway, Suite 1-160, Suwanee,
GA 30024, Panazip 11 (770) 338-6844, fax (770) 338-6721
WESTERN ZONE:
Seattle Region: 1200 Westlake Ave., North, Suite 508, Seattle, WA98109 (206) 285-8883
Los Angeles Region: 6550 Katella Ave. 17A-1, Cypress, CA 90630 (714) 373-7271
Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.
San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, Puerto Rico 00630 (809) 750-4300