Panasonic Commercial Microwave Ovens Ne C1153 Operating Instructions

- 11 -
Hot Surfaces
Exterior oven surface and the oven door is very hot
after heating. Take great care when removing hot food.
Use oven gloves.
Multi-Stage (Sequential) Heating
The oven can be programmed with up to 3 different
functions to operate in sequence. These can be
MICROWAVE, CONVECTION or COMBINATION
programs.
For 2 stage programming:
Repeat steps 1-3 on page 10, enter the next heating
program, then press Start Pad.
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating...

- 12 - CONTROLS TO  USE
8
7
6
5
3
2
9
Convection
StartMicrowave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
INFORMATION ACTION DISPLAY
1Open Door.
Put in Food.
Close Door.The oven lamp will come on.
Oven lamp turns off.
2Press
Convection 
Pad.Press Convection Pad until
required temperature appears
in display window.
3Press.
Select
Power.Select Microwave power.
Note:It is NOT possible to
select 100-60 % power.
5Press
Start Pad.Display will count down time.
The fan turns on.
At end of heating...

- 13 -
Multi-Stage (Sequential) Heating
The oven can be programmed with up to 3 different
functions to operate in sequence. These can be
MICROWAVE, CONVECTION or COMBINATION
programs.
For 2 stage programming:
Repeat steps 1-3 on page 12, enter the next heating
program, then press Start Pad.
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating
program before pressing Start Pad.
Changing the Heating Time
The heating time can be increased or decreased
during cooking by turning Timer...

- 14 -
The oven has 100 blank program capacity to meet your heating requirements.
CONTROLS TO  USE
8
7
6
5
3
2
9
Convection
StartMicrowave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
INFORMATION ACTION DISPLAY
1Open Door. The oven lamp will come on.
2Press
Program Key.Keep key pressed for 2
secondsuntil “P” is displayed.
KEEP DOOR OPEN
3Press 
Number Pad
followed byPress Number Pads “0” and
“8”. If program has been
previously set, this will
appear in display window.
If program memory is...

- 15 -
Multi-Stage (Sequential) Cooking
It is possible to program into the memory 2 or 3 stage
program using MICROWAVE, CONVECTION, or
COMBINATION.
Changing a Memory Program
To change a program simply follow steps 1-6 as
before, entering your new program.
INFORMATION ACTION
1Open Door.
Put in Food.
Close DoorThe oven lamp will come on.
Oven lamp turns off.
2Press
Number Pad
followed byPress Number Pads “0” and “8”.
3Press Start Pad.
Display will count down time.
DISPLAY
PROGRAM
1
2
3
TIME MICRO
%...

- 16 - CONTROLS TO  USE
8
7
6
5
3
9
Convection
StartMicrowave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
2
INFORMATION ACTION DISPLAY
1Open Door. The oven lamp will come on.
2Press
Program
Lock KeyKeep key pressed for 
2 seconds until “P” is
displayed.
KEEP DOOR OPEN.
After 2 seconds, “P L”
appears in display window.
After 3 seconds, display
reverts to “0”.
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE...

- 17 -
INFORMATION ACTION
1Open Door. The oven lamp will come on.
2Press
Program Lock Key.Keep key pressed for 2 secondsuntil “P L” is
displayed.
KEEP DOOR OPEN.
After 2 seconds, “P” appears in display window.
After 3 seconds, display reverts to “o”.
LOCKLock
DISPLAY
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
Two Touch Operating Mode
The oven reverts to 2 Touch Operating mode for
program “00” to “09”.
Press required memory program number then press
Start...

- 18 -
Notes on Preheat and Cooling:
!AFTER heating function has completed, oven will revert to PREHEAT function automatically.
!If you want to cancel PREHEAT function, keep Stop/Reset Pad pressed for 2 seconds.
!During PREHEAT or COOLING, if you have started from a blank display and want to select another function
pad, open the door first before selecting a function.
CONTROLS TO  USE
8
7
6
5
3
2
9
Convection
StartMicrowave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
INFORMATION ACTION...

- 19 -
To quickly cool the oven cavity, the oven has a Cooling Pad. The Cooling Pad can be used for defrosting or
heating by Microwave while in PREHEAT mode.
INFORMATION ACTION
1Press Cooling Pad. Press Cooling Pad when the display is blank or
“0”.
2Press
Start Pad.
Once the oven has cooled.!The COOLING fan and CONVECTION fan will
turn on.
!The oven door can be opened or closed.
But the oven can be cooled faster when the
door is opened than closed.
!The oven will cool in 2-30 min depending on...

- 20 -
When Program Lock is activated, you can not change the Beep Tone.
Please release the Program Lock. (See page 17.)
INFORMATION ACTION
1Open Door. The oven lamp will come on.
2Press
Program Key.Keep key pressed for 2 seconds until “P” is
displayed.
KEEP DOOR OPEN.
Prog
DISPLAY
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
PROGRAM
1
2
3
TIME MICRO
% PREHEAT
CONVSTAGE
3Press
Beep Key.Press Beep Key to choose loudness and duration
required. (See below.)
(eg. twice)
Beep
PROGRAM
1
2
3
TIME MICRO
%...