Panasonic Combination 15.2" Lcd Tv Dvd Player Tc 15dt2 Operating Instructions

61
Select the digital output to be output from the optical/coaxial digital
audio output connector of the player.
At the initial settings screen (on page 56)
Press SELECT (  ,  ) to select “6 Digital
Audio Output” and press ENTER.
1
Selecting digital output
Digital Audio Output
1  PCM Down Conversion No
2  Dolby Digital Bitstream
3  
DTS Digital SurroundPCM
 
0  Exit
When “3 DTS Digital Surround” is selected
1  PCM:Digital audio converted to 48 kHz/16 bit
PCM (2ch) is output during playback of
DVDs...

62
C LR
SRSW
SL
D2
D1
D3
Ideal position of the center
speaker
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Ideal position of
the surround
speakers
It is recommended to locate all the speakers
inside this circle.
L            R
AUDIO S-VIDEOVIDEO
FRONT L/R SURROUND L/RCENTER/SUBWOOFER5.1chSURROUND
AUDIO  OUT
VIDEO  IN
MONITOR
OUT
DC  IN
15V
ANTDV D
DIGITALAUDIO  OUT(PCM/BITSTREAM)OPTICAL
aaaaaaaaaaaaaaaaaaa
ANGLE
SKIP
STOP
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
TV...

63
Delay time [only for Dolby Digital discs] ():
If the surround speakers or the center speaker can’t be
installed at an equal distance to the front speakers from the
listening position, change the delay time to get better
surround effect.
• When D2 or D3 is equal to or larger than D1, no setting is
necessary. Otherwise, change the setting according to the
table below.
To adjust the channel balance using the test signal
1.  Select “Test” with press SELECT ( 
 ,  
,  ,  
), and
then press ENTER.
(Test...

64
Compression of the sound’s dynamic range and other special
settings can be performed.
At the initial settings screen (on page 56)
Press SELECT (  ,  ) to select “9 Other
Settings” and press ENTER.
1
2
Other settings
Other Settings
1  Still Mode Automatic2  Audio during SearchOn3  TV Mode (4:3) Pan&Scan4  D. Range CompressionOff5  Still Picture DisplayOff6  Black Level Control Lighter 
0  Exit
Press SELECT (  ,  
) to select the item and
press ENTER.
1  Still Mode:
Select either “Field still” or “Frame...

65
Note
• It is recommended that the “I PAL 60” is selected at the “6
NTSC Disc Output” when a PAL TV is connected; however,
the images shown below will appear on the TV screen. Black
bars appear at the top and bottom parts of the TV screen.
(The picture may be compressed vertically.)•  I/P/B
The MPEG 2 standard adopted for DVD uses the following 3
picture types for the coding of each picture (frame) on the TV
screen.
I:I-Picture (Intra coded picture)
This is the standard picture type, and each picture...

66
Language code list
Enter the appropriate code number for the initial settings  “Audio”, “Subtitle” and/or “Menus” (See page 57)
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
67796765
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985*
7065
7073
7074Language
Afar
Abkhazian
Afrikaan
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorssian
Bulgarian
Bihari 
Bengali; Bangla 
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Fiji Finnish...

67
The Images on the TV screen depend on the type of software and the TV set.
How images appear on your TV (aspect ratios of the screen)
• The images which appear on the TV screen, and what each screen mode is called, depend on the manufacturer of the TV set and type
of TV set. Consult the instruction manual provided with your TV set.
For your reference:
• Letterbox
Black bands are inserted at the top and bottom of the screen to fill in the gaps where the size of the picture is smaller than the screen.
•...

68
Troubleshooting
Before requesting service for this LCD/DVD combo, check the chart below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or it the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
Symptoms (Common)
Power does not turn ON
Remote control does not
function
Image shakes
Image...

69
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.Do not wipe the LCD with water
Clean the L CD using a dry soft cloth such as gauze. If the LCD is heavily soiled,
apply OA cleaner for LCD panels to the cloth and wipe off gently. Do not use keton
chemicals such as acetone, solvents such as xylen or toluene, or water.
Wipe the cabinet with a soft cloth
If the cabinet is heavily soiled, wipe with a well-wrung soft cloth dipped...

70
Specifications
Power ConsumptionAverage use : 54 W (Maximum Current 3.62 A)
Stand-by condition : 0.45 W
LCDTFT 15.2-inch, 16 : 9 aspect ratio, 854 × 480 dots, 409,920 pixel
Screen Size13.19 ″ (335 mm) (W)  × 7.4 ″ (188 mm) (H)  × 15.12 ″ (384 mm) (DIAGONAL)
Channel Capability-181VHF-12 : UHF-56 : Cable-125
Speaker3 ″ 5/32 (8 cm) × 2
Audio Output
HeadphonesM3 (3.5 mm) Jack (16 Ω ~ 32 Ω)
Sound6 W [3 W + 3 W ] (10 % THD)  Power Frequency Response  35 Hz ~ 16 kHz
FEAUTURESDVD Player 3D Y/C FILTER
CLOSED...