Panasonic Combination 15.2" Lcd Tv Dvd Player Tc 15dt2 Operating Instructions

Combination 15.2˝ LCD
 TV/DVD  Player
Operating Instructions
TC-15DT2
Model No.
TQBC0256
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
G
-
P
O
W
E
R
 
A
S
P
E
C
T
R
-
S
T
A
N
D
B
Y
O
N
P
O
W
E
RI
N
P
U
TV
O
L
U
M
EC
H
A
N
N
E
L
T
C
-
1
5
D
T
2
G-POWER 
POWEROPEN
/CLOSE
DISPALYTOP MENUANGLED
V
D
M
E
N
UENTER
TV      
MENURETURNSKIPSLOW
/SEARCH
STOP
PAUSE PLAY
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND...

2
Important Safety Instructions for LCD TV
1)   Read these instructions and apply them with your LCD TV.
2)   Keep these instructions.
3)   Heed all warnings.
4)   Follow all instructions.
5)   Do not use this apparatus near water. For example: Avoid  placing it near a bathtub, washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, etc.
6)   Clean only with dry cloth. Unplug this LCD V from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
7)   Do not...

3
17) If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges
and built up static charges. In the U.S.
Selection 810-21 of the National Electrical Code
provides information with respect to proper grounding
of the mast and supporting structure, grounding of the
lead-in wire to  an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes,...

4
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new 15.2
″  LCD TV
with built in DVD player.
To obtain maximum benefit from your set, please read these Instructions before making
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number
of your set in the space provided on the rear cover of these instructions.
For assistance, please call :...

5
Table of Contents
Install and TV Adjusts (start from the next page)
Important Safety Instructions ...................................... 2
Federal Communication Commission Information ....... 4
Installation ..................................................................... 6
Disc handling ............................................................... 6
Maintenance ................................................................ 7
SUPPLIED ACCESSORIES ........................................ 7...

6
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
To insure optimum picture do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External...

7
Installation
Check the accessories before installations.
• Operating Instruction book
(TQBC0256)• Remote Control Transmitter
(TNQE262)• Battery for the Remote Control
Transmitter
(2 × AAA size)
POWEROPEN
CLOSE
DISPALYTOP MENUANGLED
V
D
M
E
N
UENTER
TV      
MENURETURNSKIPSLOW/SEARCHSTOP
PAUSE PLAY
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCELREPEAT MODE A-B REPEAT PLAY MODER-TUNE
• AC Adaptor & AC Cord
   AC Adaptor: (N0JEHK000001)
   AC Cord: (K2CA2EA00005)• Warranty Card
• Service Center List...

8
Incoming Cable From Home Antenna (75 Ohm)
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna
Mode must be set to CABLE. (Refer to Antenna Mode section.)
Incoming 75 Ohm Cable (From Cable Company)
VHF/UHF
on left side of Set
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for...

9
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box.
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
Connect the cable from the
Output terminal on the back of the
Cable Box to the ANT terminal
on the left side of the TV.CABLE BOX
TERMINAL ON THE BACK
OF THE CABLE BOX
Incoming Cable from Antenna
or Cable TV System
OUTPUT
S-VIDEO
VIDEOL-AUDIO-R...

10
Notes:
(1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal.
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the
video input terminal are connected at the same time.
How to connect the input terminals
Installation
Audio
OUTVideo
OUTS-Video
OUT
RL
(Super-VHS VCR)
L            R
AUDIO S-VIDEOVIDEO
FRONT L/R SURROUND L/RCENTER/SUBWOOFER5.1chSURROUND
AUDIO  OUT
VIDEO  IN
MONITOR
OUT
S-VIDEO cable...