Panasonic Combination 15.2" Lcd Tv Dvd Player Tc 15dt2 Operating Instructions

11
Installation
How to connect the 5.1ch SURROUND AUDIO OUT Terminals
Notes:
• After connection is made, set the “7 Speaker Setting”
(such as Yes/No and Large/Small) according to your
speaker system. (Refer to “DVD Operating Guide”)
• Turn Virtual Surround Sound (VSS) or Headphone
VSS off if you are using more than just the two front
speakers (see page 28). Sound will only come from
the front speakers if VSS or Headphone VSS is
turned on.For your reference:
• This player can play CDs recorded in dts....

12
Installation
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
(Optional)
L            R
AUDIO S-VIDEOVIDEO
FRONT L/R SURROUND L/RCENTER/SUBWOOFER5.1chSURROUND
AUDIO  OUT
VIDEO  IN
MONITOR
OUT
(M3 plug)
Connecting OPTICAL audio cable
Note:
When connecting the optical digital audio cable
• Remove the dust protection cap from the digital audio output connector and connect the cable firmly so that the
configurations of both the cable and the connector match.
• Keep the dust...

13
Power ON / OFF
Connecting the Plug to the Wall Outlet
Push the POWER switch on the TV to turn the set on.
POWER-ON: Green
Example: The screen below is displayed for a while
after the TV is turned on. (setting condition
is an example.)
Press the POWER button on the remote
control to turn the TV off: Red (standby)
Press the POWER button on the remote
control to turn the TV on: Green
Turn the power to the TV set off by
pressing the POWER switch on the TV
when the TV is on or in standby mode.
How to Turn...

14
Location of Controls
REPEAT MODE A-B REPEAT PLAY MODE
PLAY MODE button (See page 42)
A-B REPEAT button (See page 51)
Repeating selections between two specific points.
REPEAT button (See page 50)
Controls on the TV
Volume up(+) / down(–)
buttons
Program number
selection buttons
ASPECT
R-STANDBY
G-POWER ON
POWER
TV/VIDEOVOLUMECHANNELASPECTR-STANDBY
G-POWER ON
POWERTV/VIDEOVOLUMECHANNELTC-15DT2
Input mode selection
buttons (see page 20)
ASPECT mode
selection button
(see page 23)
SKIP buttons
STOP button...

15
DISPLAY
TOP MENU
ANGLED
V
D
M
E
N
U
ENTER
TV      
MENU
RETURN
SKIPSLOW/SEARCH
STOP
PAUSE PLAY
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
R-TUNE
OPEN
CLOSE
POWER
Location of Controls
OPEN CLOSE button
Press to open or close DVD tray.
R-TUNE button
Switches to previously view to channel or video mode. Direct program number selection buttons DISPLAY button
Press the DISPLAY button to display the current system status.
Refer to “DVD Operation Guide” when using the...

16
DISPLAY
TOP MENU
ANGLED
VD
M
ENU
RETURN
SKIP
STOP
PAUSE PLAY
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
R-TUNE
TV      
MENU
ENTER
SLOW/SEARCH
OPEN
CLOSE
POWER
Flow Chart of TV menu
If the MENU button is
pressed, the MENU
screen will be displayed.
If the MENU button is
pressed once more while
the menu screen is
displayed, the MENU
screen will be cleared.
MENU
ADJUST
PICTURE
AUDIO PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUSTSET  UPMENU
ADJUST
PICTURE
AUDIO PICTURE...

17
Flow Chart of TV menu
TO POSITION/SIZE
POSITION / SIZE
NORMAL
SIZE
RETURNNORMALIZE
1
(See page 24)TO AUDIO ADJUST
menu
AUDIO  ADJUST
NORMAL
0
0
0 AUTO
ON
MODE
BASS
TREBLE
BALANCE
SURROUND
STEREO          SAP          MONO
(See page 27)
TO LOCK
selection screen TO PICTURE ADJUST
menu
+ 5
0
0
0
0
0
PICTURE  ADJUST
NORMAL
PIC  MODE
BACK  LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI  PICTURE
OFF          ON STANDARD
(See page 25)
TO PROGRAM CHANNELS
adjust screenTO DVD SET UP
PROGRAM  CHANNELS
MODE...

18
Press to select PROGRAM CHANNEL.
Press to display the PROGRAM CH.
Tuning channels (Automatic channel programming)
Automatically searches and adds receivable channels in the installed area and/or CATV
signals to the program.
1
2
Press to select MODE.
Press to select TV or CABLE.
Notes:
• When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing. (Channel
searched up to this point are added.)
• After AUTO PROGRAM is finished, the lowest channel number added will be...

19
Tuning channels (Manual channel programming)
Use this setting when changing setting of receiving channels or changing the channel display.
Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM
CHANNEL screen.
Press to select MODE.
Press to select TV or CABLE.
1
2
Press to select MANUAL PROGRAM.
Press to display the MANUAL PROGRAM screen.
Selecting the PROGRAM CHANNELS menu.
Adding or deleting channels
Press to select channel ( or number keys ).4...

20
Playing a VCR or other peripheral equipment
2
3
The input mode changes each time this
button is pressed.
Operate the connected equipment.
Confirming connections
Confirm that the TV is in standby mode.VCR
Laser Disk Player
DVD player
• When playing
    a video
• When playing
    a DVD
Turning the power on and switching input modes
This equipment can also be
connected to the rear
terminals. See Connections
for details.
Note:
When the remote control is unavailable, input modes can also be switched
on the...