Panasonic Color Television Ct 32sl15 Operating Instructions

							Color Television
Operating Instructions
Télé-couleur
Manuel d’utilisation
TQB2AA0529 50217
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
CT-32SL15CT-32SC15
0529 Prod cover 50217.fm  Page 1  Tuesday, February 22, 2005  9:29 AM 
						

							ENGLISH
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.The lightning flash with arrow head
within a triangle is intended to tell the
user that parts inside the product are
a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WA R N I N G
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH 
AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
The Class II insulation symbol (square within a square) indicates that this product has been evaluated 
and tested to comply with Class II insulation requirements.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2005 by Panasonic Corporation of North America. All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							TABLE OF CONTENTS
1 z
ENGLISH
WARRANTY AND SERVICE CENTER  SECTION
WarrantySECCIÓN DE GARANTÍA Y CENTRO DE SERVICIOGarantía
REMOTE CONTROL  SECTION   
RemoteSECCIÓN DE CONTROL REMOTORemoto
Table of Contents
Congratulations ............................................... 3
Customer Record ........................................................   3
Care and Cleaning ......................................................   3
Specifications ..............................................................   3
Feature Chart ..............................................................   3
Installation ........................................................ 4
Television Location .....................................................   4
Optional Cable Connections .......................................   4
AC Power Supply Cord ...............................................   4
Cable / Antenna Connection .......................................   4
Remote Control Battery Installation ............................   4
Inital Set Up Menu ............................................ 5
Optional Equipment Connections .................. 6
VCR Connection .........................................................   6
Front Control Panel .....................................................   6
Cable Box Connection ................................................   6
Digital TV - Set-Top Box (DTV-STB) or DVD Player 
Connection ................................................................   6
Amplifier (TO AUDIO AMP).........................................   7
Connection to Front AV jacks......................................   7
Icon Menu Navigation ...................................    8Icon Menu Operation.....................................    9
Set Up .........................................................................    9
Picture.........................................................................    9
Timer...........................................................................  10
Channels.....................................................................  11
Audio...........................................................................  11
Lock ............................................................................  12
V-Chip Menu Operation ................................  12
Troubleshooting Chart..................................  18
Index ...............................................................  19
Manual de instrucciones [ Resumen ]
Felicidades ................................................................  15
Instalación de Pilas en el Control Remotol .................15
Programación Inicial   ............................................ 15
Conexiones de Equipo Opcional   .......................... 15
Conexión de la Videocasetera  .............................. 15
Conexión del Decodificador de Cable  ................... 16
Conexión del Decodificador de Señal Digital
ó DVD.................................................................. 16
Conexión del Amplificador de Sonido  ................... 16
Panel de Control Frontal ........................................ 16
Conexión a los conectores de A/V frontales .......... 17
Navegación del menu de iconos  ........................... 17  
						

							2 z
IMPORTANT INFORMATION
ENGLISH
Important Information
FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY
APPROVED BY PANASONIC CORPORATION OF NORTH AMERICA COULD CAUSE
HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO
OPERATE THIS EQUIPMENT.
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
Important Information Regarding the Use of Video Games, Computers, or Other Fixed 
Image Displays
WARNING: The marking or retained image on the picture tube resulting from viewing a fixed image
is not an operating defect and as such is not covered by Warranty. 
This television is designed to display constantly moving images on the screen. Continuous viewing of
stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image),
stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed
scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.
The extended use of fixed image program material can cause permanent picture tube damage, shown as
a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be
limited by performing the following steps:
• Do not display the fixed image for extended periods of time.
• Turn the power off when not in use.
WARNING: KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN.
THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND
PLASTIC SHEET. 
						

							CONGRATULATIONS
3 z
ENGLISH
Congratulations
Your new Panasonic Tau Television features state-of-the-
art technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at:  www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner and a clean
cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Warning:Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products.
Specifications
Specifications are subject to change without notice or
obligation.  
  
Feature Chart
  
Power Source
CT-32SC15 (2.4A)
CT-32SC15U (2.4A)
CT-32SL15 (2.4A)
CT-32SL15U (2.4A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack 
Ty p e
Audio Input Jacks500mV RMS 47K Ohm
 Audio Output Jacks0-655mV RMS 4.7K Ohm
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector
MODELS
CT-32SC15
CT-32SL15
FEATURES
MENU LANGUAGE 
ENG/SPAN/FR••
VIDEO PICTURE 
MEMORY••
VIDEO INPUT SKIP••
VIDEO INPUT 
LABELING••
VM
VELOCITY
MODULATION••
CLOSED CAPTIONING••
V-CHIP CAPABILITY ••
VIDEO NORM••
AUDIO NORM••
STEREO••
AI SOUND••
BASS/BALANCE/
TREBLE••
SURROUND••
A/V IN 
(REAR/FRONT) 3
(2/1) 3
(2/1)
S-VIDEO INPUT 
(REAR/FRONT) 
  (1/0)  (1/0)
COMPONENT VIDEO 
INPUT••
AUDIO OUT•• 
						

							4 z
INSTALLATION
ENGLISH
Installation
Television Location
Follow these recommendations before deciding on the
location of your television.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. In order to
avoid injury to children, never place your television receiver on a
piece of furniture that is capable of being tilted by a child leaning
on it, pulling on it, standing on it, or climbing on it. A falling
television can cause serious injury or even death.  
CT-32SC15, CT-32SC15U:
CAUTION:
 These television receivers for use only with
PANASONIC TY-32SC15T stand. Use with other carts (or
stands) is capable of resulting in instability causing possible
injury.
CT-32SL15, CT-32SL15U:
CAUTION:
 These television receivers for use only with
PANASONIC TY-32HL15T stand. Use with other carts (or
stands) is capable of resulting in instability causing possible
injury.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.Cable Connection
Connect the cable supplied by your local
cable company. Tighten with fingers only.
Use of any tool (e.g. pliers) for tightening
may result in tuner damage.
Note:A cable converter box may be
required for proper reception.
Check with your local cable
company for compatibility requirements.
Antenna Connections
• For proper reception of VHF/
UHF channels, an external
antenna is required. For best
reception an outdoor antenna
is recommended. 
  
Note:Cable Mode is preset at the
factory. Antenna users must
change to TV Mode in the Set Up menu under Prog
Chan (page 9).
Remote Control Battery Installation
Requires two AA batteries (supplied).   
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the cover
and sliding it off in the direction indicated.
2. Install batteries matching (+) and (-) polarity signs.
3. Replace the battery cover by sliding it in reverse until
the lock snaps.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon with alkaline).
• Do not recharge, heat, short-circuit, disassemble, or
burn batteries.
Polarized plug75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
1
AA / 1.5A
AA / 1.5A
Battery Polarity
2
AA / 1.5A
AA / 1.5A
3 
						

							INITIAL SET UP MENU
5 z
ENGLISH
Initial Set Up Menu
Note:Menus may vary, depending on model. Please refer to
the FEATURE CHART on page 3 for your model’s
capabilities. 
For your convenience, Auto Set up menu will be displayed
on screen when the set is turned on for the first time. If
needed, follow the menus and procedures for setting up the
features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
• Press VOL X to select English, Spanish or French.   
MODE
To select TV (antenna) or CABLE mode depending on the
signal source.
Procedure
• Press VOL Xto select TV or CABLE.    
AUTO PROGRAM
To automatically program all available channels received
through the RF input.
Procedure
• Press VOL X to start Auto Programming.  
Note:To ensure proper channel programming, wait until AUTO
PROG. automatically stops the scan.
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAMENGLISH 

CABLE 

   

PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAMENGLISH 

CABLE 

   

PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAMENGLISH 

CABLE 

   

PRESS ACTION TO  EXIT 
						

							6 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Optional Equipment Connections
Note:The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection 
VCRs, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information. 
Note:VIDEO 1 input is a dual-purpose input. It is primarily
intended for connection with 480i devices such as a DVD
player using the Y P
B PR component video jacks and
Audio L & R jacks. However, it can also be connected to
conventional composite video sources such as a VCR,
using only the Y/Video jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.   
Note:Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Procedure
• Connect equipment as shown to front or rear Audio/
Video input jacks.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.
Note:Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the
same time. If both are connected, signal interference will result.
Use either the S-VIDEO or the Video signal only.  
Front Control Panel
The front control panel can be used to operate the television
when the remote control is not available
.   
A second VCR, Camcorder, DVD player, a video disc player,
video game equipment or DSS equipment can also beconnected to the video inputs. See the optional equipment
manual for details
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button  to select the desired input.
• Operate optional equipment as instructed in equipment
manual.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.     
Procedure
• Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
• Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD 
Player Connection
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
Note:Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.      
Notes:
• There are three video jacks, Y, P
B, and PR.
Separate component color inputs provide
luminance and color separation.  Use the L (left)
and R (right) audio inputs.
• Select DTV-STB to 480i output mode. TV set can
receive 480i signal only. Picture distortion will result
if any other type of format is selected (i.e. 480p,
720p or 1080i).
TERMINALS ON BACK OF TELEVISIONVCRPLAY
STOP R
E
WFF
ANT IN ANT OUT VIDEO OUT
AUDIO OUT 
L
R
Incoming 
Cable
PRPBY/VIDEO
R-AUDIO-L 
R-AUDIO-L VIDEOCOMPONENT
VIDEO INPUT
INPUT 1
S-VIDEOINPUT 2L
R
TO AUDIO
AMP
ANT
CABLES NOT INCLUDED
Use either the S-Video or
Video Connection
L - AUDIO - R VIDEOINPUT 3
TV / VIDEO
   POWERACTION  CH
CH VOLVOL

VIDEO 3 L - AUDIO - RACTIONCH 
CH   VOLVOL 
TV/VIDEOPOWER
FRONT AV PANEL FOR CT-32SL15
FRONT AV PANEL FOR CT-32SC15
POWER ON/OFF
ON/OFF INDICATOR
INFRARED SENSOR
EXIT
Note:The ON/OFF indicator LED (red) will light up (red) when
the set is on.
PRPBY/VIDEO R-AUDIO-L
R-AUDIO-L VIDEO COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEOINPUT 2L
R TO AUDIO
AMPANT
Incoming
Cable
ANT IN  ANT OUT
15
CABLE BOXTERMINALS ON BACK OF TELEVISION
CABLES NOT INCLUDED
PRPBY/VIDEO
R-AUDIO-L 
R-AUDIO-L VIDEO COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEOINPUT 2L
R TO AUDIO
AMP
DIGITAL TV OUTPUTYPBPR
S-VIDEO VIDEOR-AUDIO-L
NTSC OUTPUT
R-AUDIO-L 
CABLES NOT SUPPLIED
TERMINALS ON BACK OF 
DTV-STB OR DVD PLAYERCOMPONENT VIDEO INPUT 
TERMINALS ON BACK OF TV 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7 z
ENGLISH
Amplifier Connection (TO AUDIO AMP)  
Connect to an external audio amplifier input for listening to a
stereo system.
Note:TO AUDIO AMP terminals cannot be connected directly
to external speakers.  
Note:Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Audio Adjustments
• Select TV SPEAKERS ON from AUDIO menu. 
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu. 
• Volume, mute, bass, treble and balance are now
controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Connection to Front AV jacks
A second VCR, Camcorder, DVD player, a video disc player,
video game equipment or DSS equipment can also be
connected to the video inputs. See the optional equipment
manual for details
.  
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select front VIDEO input
(VIDEO 3).
• Operate optional equipment as instructed in equipment
manual.
Direct Video Input Selection
This feature lets you select video input directly using the TV/
VIDEO button and the numeric keys on the remote control.
Procedure
Note:Press TV/VIDEO button on the remote control to display
the Input selection menu. 
• Press corresponding number key on the remote control
to select the input of your choice.
Note:Video input can also be selected by pressing the 
TV/VIDEO, then the CH ST buttons.
TERMINALS ON BACK OF TELEVISION
PRPBY/VIDEO R-AUDIO-L 
R-AUDIO-L VIDEO COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEOINPUT 2L
R TO AUDIO
AMP
CABLES NOT INCLUDED
External Amplifier
VIDEO 3L - AUDIO - R
L - AUDIO - R VIDEOINPUT 3
Front AV jacks for 
CT-32SL15Front AV  jacks  for 
CT-32SC15
PLAY
STOP R
E
WFFVCR PalmcorderVIDEO GAME
CONSOLE
AV  O U TR - AUDIO - L VIDEO
S-VIDEO

 

1 TV
2  VIDEO1
3  VIDEO2
4  VIDEO3 
						

							8 z
ICON MENU NAVIGATION
ENGLISH
Icon Menu Navigation
Press to display the Icons.
Press to select desired icon.
Press to display selected
Icon features. 
Press
to select feature, then
press VOL X.
Press
PICTURE
VIDEO ADJ.PIC MODE
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
NORMAL
- - - - - - - -- - - - - - - -
VIVID 

OTHER ADJ.
NO- - - - - - - - - - - -  - - - - - - - -
PICTURE
VIDEO ADJ.PIC MODE
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
NORMAL
- - - - - - - -- - - - - - - -
VIVID 
OTHER ADJ.
NO- - - - - - - - - - - -  - - - - - - - -
to adjust or activate feature.
Press repeatedly to exit menus.
NORMAL PICTURE
L O C K
L O C K
BRIGHTNESS 32- - - - - - - -