Panasonic Color Television Ct 32hx42 Operating Instructions

							OPTIONAL EQUIPMENT CONNECTIONS
9 l
Front Control Panel (models CT-32HX42 and CT-36HX42)
The front control panel can be used to access menus and switch video mode when the remote control is not available.  
Open the door on the TV front panel to use the connections for your optional equipments (Camcorder, VCR or other video
components). Select INPUT 4 mode by pressing TV/VIDEO button.
Procedure
1. Connect equipment to front Audio/Video input jacks.
2. Press TV/VIDEO button to select VIDEO 4 input mode.
3. Operate optional equipment as instructed in equipment manual.
Front control Panel (models CT-32HL42 and CT-36HL42)
Follow the procedure above to connect the optional equipment to front Audio/Video input jacks.
ACTION TV/VIDEOq CHANNEL pS-VIDEOVIDEO L-AUDIO-Rt VOLUME uHPJ
INPUT 4
ON/OFF INDICATOR
POWER ON/OFF
CAMCORDER
Note:The ON/OFF indicator LED (red) will be lit when set is on. 
Note:The S-VIDEO connection provides higher quality picture. It overrides VIDEO 4 connections. Use INPUT 4, AUDIO L and R 
with S-VIDEO connection.
INFRARED SENSOR
Note:The ON/OFF indicator LED (red) will be lit when set is on. 
INPUT 4
p
CH
S-VIDEO VIDEO L-AUDIO-R HPJ
ACTIONTV/VIDEO POW ER VOL u t
 VOL
q
CH
CAMCORDERPOWER ON/OFFON/OFF INDICATORINFRARED SENSOR
Note:The S-VIDEO connection provides higher quality picture. It overrides VIDEO 4 connections. Use INPUT 4, AUDIO L and R 
with S-VIDEO connection. 
						

							10 l
OPTIONAL EQUIPMENT CONNECTIONS
Program Out Connection (PROG OUT) 
To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of
the television.
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
3. See optional equipment manual for further instructions for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, P
B, PR) of the television. A
DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV. 
Note:There are 2 sets of three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color
separation.  Use the L (left) and R (right) audio inputs.
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
 OUT
INPUT
CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV
VCR
OR MONITOR
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
 OUT
INPUT
 TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL  TV OUTPUT
PRPBYMAIN 
VIDEO
NTSC  OUTPUT
R-AUDIO-L
S-VIDEO
L-AUDIO-R
-VIDEO
COMPONENT INPUT TERMINALS ON BACK OF TV CABLES NOT SUPPLIED 
						

							PIP AND SPLIT OPERATION
11 l
PIP and Split Operation
Note:PIP or Split frame can’t display the same channel or video source as Main Picture.
PIP Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
  
Split Operation 
This feature lets you watch two different channels side by side with or without an external video source. 
PIP and Split Operation With a Cable Box 
To view premium (scrambled) cable channels through your cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable channels in the Main Picture while viewing a television program or video
in the PIP or Split frame.
Procedure
rSelect ANT 2 in the SET UP menu under Prog Chan (Program Channels).
rTune TV to Channel 3.
rPress  or  on the remote control to display the PIP or Split frame.
Note:Audio is from the Main Picture only.
rVerify the Cable box is ON.
rChoose channels for the Main Picture by tuning the cable box.
rChoose channels for the PIP or Split frame by pressing  .
Note:Swap is not available when using the cable box to tune channels. If your cable box has video output, it can be
connected to the TV to allow you to use all PIP or Split functions. See the equipment manual for more information.
Main Picture
PIP Frame
rConnect incoming cable to ANT 1 input on back of TV.
rPress   to display PIP frame.
rSelect channels for the PIP frame by pressing  .
rSelect channels for the Main picture by pressing 
or use the remote control numeric keypad.
rPress  to switch the PIP and MAIN PICTURE source.
rPress  to view picture source status. 
rPress   to cancel PIP frame.
PIP
     PIP CH
or
CHCH
SWAP
RECALL
PIP
Note:Audio is from Main Picture only.
Split Picture
no Audio
rPress   to display Split screen.
rSelect channels for the Split screen by pressing
.
rSelect channels for the Main picture by pressing 
or use the remote control numeric keypad.
rPress  to switch the SPLIT SCREEN and MAIN
PICTURE source.
rPress  to view picture source status.
rPress   to cancel Split screen. 
SPLIT
 PIP        CH
or
CHCH
SWAP
RECALL
SPLIT
Main Picture
with Audio
Note:Audio is from Main Picture only.
PIPSPLIT
  PIP        CH 
						

							12 l
PIP AND SPLIT OPERATION
PIP and Split Operation (contd.) 
TV/VIDEO Button (PIP and Split)
Press when PIP or Split frame is displayed to select desired input mode
.  
Search Button (PIP and Split) 
This feature lets you scan through all available channels. 
Move Button (PIP only)
This feature is used to move PIP frame to one of four corners. 
 
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX button to vary the size of PIP frame.
    
PIP Frame
Main Picture
CH #COMPONENT 1COMPONENT 2 VIDEO 1
VIDEO 2 VIDEO 3VIDEO 4
Main Picture
COMPONENT 2 VIDEO 1
VIDEO 2 VIDEO 3
Split Frame
CH #COMPONENT 1
VIDEO 4
Search Frames
rPress   or   to display PIP or Split frame.
rPress   to display search frames.
rPress  again to stop search feature.
PIP or Split frame channel will be the last active
search frame.
rPress   or   to cancel PIP or Split frame. 
PIPSPLIT
SEARCHOPEN/CLOSEp
SEARCHOPEN/CLOSEp
PIPSPLIT Main Picture
2
3
4
PIP Frame
rPress   to display PIP frame.
rPress   to position PIP frame to desired corner.
rPress   to cancel PIP frame. 
PIP
 MOVE
PIP
Main Picture
MIN
rPress   to display PIP frame.
rPress   or   to size PIP frame.
rPress   to cancel PIP frame. 
PIP
 PIP MIN PIP MAX
PIP Main Picture
MAX 
						

							PIP AND SPLIT OPERATION
13 l
PIP and Split Operation (contd.)
Freeze Button (PIP and Split)
This feature is used to stop action in PIP or Split frame.
  
Main Picture Freeze Feature 
This feature is used to stop action of the Main Picture in display it on a Split or PIP freeze frame.
  
PIP, Split and Freeze Mode Buttons Operational Chart
   This chart indicates the buttons that are operational with PIP, Split or Main Picture Freeze mode.  
Special Remote Buttons
ASPECT Button
The ASPECT button on the remote control lets you select the picture size ratio to match programming format when using
DTV STB or DBS. 
BBE Button
Press this button to turn the BBE
® sound feature On or Off. BBE® Sound technology enhances speech intelligibility and
restores the dynamic range of musical passages to provide outstanding natural sound.
SAP Button
Press this button to let you cycle through different audio modes. If you are receiving a stereo program and you press the
SAP button, you can cycle between STEREO and MONO.
REMOTE
BUTTONSPIP MODESPLIT MODEMAIN PICTURE 
FREEZE MODE
PIP MINSize Smaller No Effect No Effect
PIP MAXSize Larger No Effect No Effect
FREEZEFreeze PIP Frame Freeze Split Frame Display or Delete
PIP CHChange Channel Change Channel No Effect
SEARCHDisplays Search Frames Displays Search Frames No Effect
PIPDisplays PIP Frame Displays PIP Frame No Effect
SPLITDisplays Split Frame Displays Split Frame No Effect
MOVEMove PIP Frame No Effect Move PIP Frame
SWAPSwap With Main Picture Swap With Main Picture No Effect
rPress PIP or SPLIT to display PIP or Split frame.
rPress   to stop PIP or Split frame action.
rPress   again to continue action. 
rPress PIP or SPLIT to cancel PIP frame. 
FREEZETV/VCR
FREEZETV/VCRMain Picture
Freeze frame
rTo stop action for Main picture, press   while
PIP or Split frame is not displayed.
rMain Picture freeze will be displayed in a PIP or Split
frame, depending on the selection in the Freeze menu
located in Picture Other ADJ2 section (refer to page 36). 
rPress  again to cancel Main Picture freeze
frame.
Note: While Main Picture freeze frame is displayed, only
move button is active for PIP, all other PIP and Split
buttons have no effect (see chart below). 
FREEZETV/VCR
FREEZETV/VCR
Main PictureMain Picture 
Freeze frame
PIP or Split.  
						

							14 l
REMOTE CONTROL OPERATION (MODELS CT-32HL42 AND CT-36HL42)
Remote Control Operation (models CT-32HL42 and CT-36HL42)
               
Press to turn ON and OFF.
POWER
MUTE
Press to mute sound. Press to display and
cancel CC (Closed Caption).
SAP
 
Press to access second audio program.
TV/VIDEO
Press to select TV or input modes.
Press to select remote operation.
 VC
R
 DV
D
   
T
V
 C
BL D
BS
 
AU
X RCV
R
 D
TV
ACTION
Press to access menus.
Press to select next or previous channel and 
navigate in menus.
CH
CH
Press to adjust TV sound and navigate in 
menus.
VOL  VOL
EXIT  
DBS functions button.
GUIDE 
DBS functions button.
*PIP MIN
REWPLAY*PIP MAX
FF
PAUSESTOPREC
*FREEZE
TV/VCR *PIP CH
VCR CH*SEARCH
OPEN/CLOSE
*PIP*SPLIT     *MOVE
       *SWAP
*Split or PIP function buttons
Component function buttons
u
Press numeric keypad to select any channel.
7
4
12
5
8
0
9
6
3
R-TUNE
Press to switch to previously viewed 
channel or input modes.
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
PROG  
Press to enter minor number in a compound 
number.
RECALL    
Press to display time, channel, sleep timer, 
and other options.
BBE
MENU
BBE - Press to turn on or off.
MENU - Press to access DBS or DVD menus.
PA G E
DBS page up/down and DVD skip -/+ buttons. 
LIGHT  
Press to illuminate remote buttons.
ASPECT  
Select picture size (ratio) to match 
programming format (DTV-STB and DBS 
only). 
EUR7603Z30 
						

							REMOTE CONTROL OPERATION (MODELS CT-32HL42 AND CT-36HL42)
15 l
Mode Operational Key Chart
This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode
TV, DTV, CABLE, DBS, VCR, DVD ...etc.
  
KEY NAMETV  MODEDTV MODECABLE MODEDBS MODE
POWER POWER POWER POWER POWER
SAP SAP ON/OFF---
MUTE MUTETV MUTECBL MUTETV MUTE
ASPECT-     DTV ASPECT-DBS ASPECT 
TV/VIDEO INPUT SWITCH TV INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCH
CHAN  UP CHANNEL UP -CABLE CHANNEL UPDBS NAVIGATION UP
CHAN  DOWN CHANNEL DOWN -CABLE CHANNEL DOWNDBS NAVIGATION DOWN
VOL RIGHT VOL + NAVIGATION RIGHTCABLE VOL +DBS NAVIGATION RIGHT
VOL LEFT VOL - NAVIGATION LEFTCABLE VOL -DBS NAVIGATION LEFT
ACTION ACTION ACTIONENTERDBS ACTION
BBE/MENU  BBE On or off STB MENU-STB MENU
RECALL DISPLAYSTB PROGRAM INFO.TV DISPLAYSTB PROG. INFO
EXIT-DTV EXIT -STB EXIT
PA G E  D O W N-STB PAGE DOWN-STB PAGE DOWN
PA G E  U P-STB PAGE UP-STB PAGE UP
GUIDE- STB PRODGRAM GUIDE-DBS PRODGRAM GUIDE
1 DIGIT 1 STB DIGIT 1DIGIT 1DIGIT 1
2 DIGIT 2 STB DIGIT 2 DIGIT 2DIGIT 2
3 DIGIT 3 STB DIGIT 3DIGIT 3DIGIT 3
4 DIGIT 4 STB DIGIT 4DIGIT 4DIGIT 4
5 DIGIT 5 STB DIGIT 5DIGIT 5DIGIT 5
6 DIGIT 6 STB DIGIT 6DIGIT 6DIGIT 6
7 DIGIT 7 STB DIGIT 7DIGIT 7DIGIT 7
8 DIGIT 8 STB DIGIT 8 DIGIT 8DIGIT 8
9 DIGIT 9 STB DIGIT 9 DIGIT 9DIGIT 9
0 DIGIT 0 STB DIGIT 0 DIGIT 0DIGIT 0
R-TUNEPREVIOUS CHAN 
OR VIDEO MODE       PREVIOUS DTV CHAN  CABLE PREVIOUSSTB PREVIOUS
PROG-DTV PROGRAM/DASH-STB PROGRAM/DASH
PIP MIN
FF----
PAUSE----
STOP----
RECORD--VCR RECORDSTB RECORD
FREEZE/TV/VCRTV PIP OR SPLIT FREEZE--STB/DTV/SAT SW
PIP CH   
VCR CHPIP OR SPLIT
CHAN   -CABLE CHANNEL DOWNSTB CHANNEL DOWN
PIP CH   
VCR CHPIP OR SPLIT
CHAN   - CABLE CHANNEL UPSTB CHANNEL UP
SEARCH
OPEN/CLOSESPLIT OR PIP SEARCH---
PIPPIP ON/OFF---
SPLITSPLIT ON/OFF---
MOVEMOVE PIP---
SWAPSWAP PIP OR SPLIT WITH
MAIN PICTURE---
LIGHT  REMOTE BUTTONS  
						

							16 l
REMOTE CONTROL OPERATION (MODELS CT-32HL42 AND CT-36HL42)
Mode Operational Key Chart (contd.) 
KEY NAMEVCR MODEDVD MODE
         (DVD)                          (CD)AUX MODE
            (VCR2)                         (TAPE)                  (PVR)     RCVR
MODE
POWER POWER POWERPOWER POWER POWER POWER POWER
SAP-------
MUTETV MUTETV MUTERCVR MUTETV MUTERCVR MUTETV MUTERCVR MUTE
ASPECT-------
TV/VIDEOTV INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCHTV INPUT SWTV INPUT SWRCVR INPUT 
SW
CHAN  UPVCR CHANNEL UPNAVIGATION UPNEXT TRACKVCR CHANNEL UP-PVR UPTUNER +
CHAN
DOWNVCR CHAN DOWN  NAVIGATION 
DOWNPREVIOUS TRACKVCR CHANNEL 
DOWN -PVR DOWNTUNER -
VOL RIGHT    TV VOLUME + NAVIGATION 
RIGHTTV/RCVR VOLUME 
UP    TV VOLUME +RCVR 
VOLUME + PVR RIGHTRCVR 
VOLUME + 
VOL LEFTTV VOLUME - NAVIGATION LEFTTV/RCVR VOLUME 
DOWNTV VOLUME -RCVR 
VOLUME - PVR LEFT RCVR 
VOLUME - 
ACTIONTV ACTIONSELECT- TV ACTION-SELECT-
BBE/MENU-DVD MENU-----
RECALLONSCREEN VCR
DISPLAYDVD DISPLAYTIME FORMATONSCREEN VCR 
DISPLAY-PVR ENTER-
EXIT----- PVR Exit-
PA G E
DOWN-SKIP -SKIP -----
PAGE UP-SKIP+SKIP+----
GUIDE-TITLENEXT TRACK--PVR GUIDE-
1DIGIT 11 CHAPT.TRACK 1DIGIT 1-DIGIT 1AV  1
2DIGIT 22 CHAPT.TRACK 2DIGIT 2-DIGIT 2AV  2
3DIGIT 33 CHAPT.TRACK 3DIGIT 3-DIGIT 3AV  3
4DIGIT 44 CHAPT.TRACK 4DIGIT 4-DIGIT 4AV  4
5DIGIT 55 CHAPT.TRACK 5DIGIT 5-DIGIT 5CD
6DIGIT 66 CHAPT.TRACK 6DIGIT 6-DIGIT 6TUNER
7DIGIT 77 CHAPT.TRACK 7DIGIT 7-DIGIT 7PHONO
8DIGIT 88 CHAPT.TRACK 8DIGIT 8-DIGIT 8TA P E
9DIGIT 99 CHAPT.TRACK 9DIGIT 9-DIGIT 9AUX
0DIGIT 00 CHAPT.TRACK 0DIGIT 0-DIGIT 0-
R-TUNE----DECK A/BREPLAY 
ZONES-
PROG-----RETURN TO 
LIVE-
PIP MIN
>SEARCH
FFVCR FFTAPE FF PVR FFSURROUND +
PAUSEVCR PAUSEDVD PAUSECD STILL/PAUSEVCR PAUSETAPE PAUSEPVR PAUSE -
STOPVCR STOPDVD STOPCD STOPVCR STOPTAPE STOPPVR STOP -
RECORDVCR RECORD--VCR RECORDTAPE RECORDPVR RECORD-
FREEZE/TV/
VCRTV/VCR SWITCH--TV/VCR SWITCH-INSTAND 
REPLAY-
VCR/DBS
CHAN VCR CHANNEL 
DOWNSLOW -RANDOMVCR CHANNEL 
DOWN--CENTER -
VCR/DBS
CHAN VCR CHANNEL UPSLOW +REPLAYVCR CHANNEL UP--CENTER +
SEARCH
OPEN/
CLOSE-OPEN/CLOSE OPEN/CLOSE-OPEN/CLOSEQUICK SKIP-
PIP-------
SPLIT-------
MOVE-------
SWAP-------
LIGHT REMOTE BUTTONS  
						

							REMOTE CONTROL OPERATION (MODELS CT-32HL42 AND CT-36HL42)
17 l
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code. 
Programming With A Code
Procedure
• Confirm that the external component is plugged and operating.
• Turn the component off.
• Press  and   together, for at least 5 seconds.
• Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV,
CABLE or DBS.
• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
•Press the Remote Control   to test the component. If the procedure was successful, the component will
turn on.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
• Confirm that the external component is plugged in and on.
• Turn the component off.
• Press  and   together, for at least 5 seconds.
• Press appropriate component button on the Remote Control.
• Press 
VOL uto move forward to the next code. Press t VOL to move backward.
• Press the Remote Control   to test the component. If the procedure was successful, the component will turn
on.
Note:Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
• After the code is found, press   to store the code.  Default Modes For Remote Control
DeviceOperatesDefault
TVTV (Panasonic Only)Panasonic TV Codes
DTVDTV (Panasonic Only)Panasonic DTV Codes
CABLECABLE (Preset)Panasonic CABLE Codes
DBSDBS (Preset)Panasonic DBS Codes
VCRVCR (Preset)Panasonic VCR Codes 
DVD/CDDVD and CD (Preset) Panasonic DVD Codes
AUXPersonal Video Recorders, 
Tape and VCR2 Panasonic Personal Video 
Recorders Code
RCVRAudio Receiver (Preset) Panasonic RCVR Code
Helpful Hints:  Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ACTIONPOWER
POWER
ACTIONPOWER
POWER
ACTION 
						

							18 l
REMOTE CONTROL OPERATION (MODELS CT-32HL42 AND CT-36HL42)
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components
may not operate because the codes are not available due to limited memory. The Universal Remote Control does not
control all features found in each model. 
 
    
Write the code numbers from tables in this space. This will serve as a reference if you need
to program your Remote Control.
VCR
 DVD DVD (CD) AUX (VCR 2) AUX (TA P E ) 
RECEIVER DTV CABLE DBS 
BrandCode
Admiral335
Aiwa332
Akai314, 315, 316, 329
Audio Dynamic311, 339
Bell & Howell305, 313
Broksonic320, 326
Canon323, 325
Citizen306
Craig305, 306, 329
Curtis Mathes324, 345
Daewoo301, 324, 343
DBX310, 311, 339
Dimensia345
Emerson303, 319, 320, 325, 326, 343
Fisher305, 307, 308, 309, 313
Funai320, 326, 334
GE324, 333, 345
Goldstar306
Gradiente334
Hitachi300, 323, 345
Instant Replay323, 324
Jensen339
JVC310, 311, 334, 339
Kenwood306, 310, 311, 339
LXI300, 305, 306, 307, 308, 309
Magnavox323, 324, 331
Marantz310, 311, 339
Marta306
Memorex309, 324
MGA338, 340, 341, 347, 348
Minolta300, 345
Mitsubishi338, 340, 341, 347, 348
Multitech304, 347
NEC310,311, 334, 339
Olympic323, 324
Optimus306, 321, 328, 335
BrandCode
Orion320, 326
Panasonic321, 322, 323, 324
J.C. Penney300, 305, 310, 311, 324, 339, 345
Pentax300, 311, 345
Philco320, 323, 324, 326, 331, 343
Philips323, 324, 331
Pioneer323
Proscan300, 301, 302, 323, 324, 331, 333, 
345, 346
Quasar321, 322, 323, 324
Radio Shack305, 309, 324, 333, 336, 340
RCA300, 301, 302, 323, 324, 331, 333, 
345, 346
Realistic305, 309, 324, 336, 340
Samsung302, 304, 333
Sansui320, 326, 339, 352
Sanyo305, 309, 313
Scott301, 302, 304, 309, 320, 326, 338, 
340, 347, 348
Sears300, 305, 306, 307, 308
Sharp335, 336
Shintom317
Signature 2000335
Singer317
Sony328, 329, 330
Sylvania323, 324, 331
Ta s h i r o306
Ta t u n g310, 311, 339
Te a c310, 311, 339
Te c h n i c s321, 322, 323, 324
Te k n i k a324
To s h i b a301, 346
Vector Research311
Wards306, 309, 335, 336, 344
Yamaha305, 310, 311, 339
Zenith306, 344
Codes For VCR