Panasonic Color Television Ct 32hx42 Operating Instructions

							®
®
Color Television
Operating Instructions
CT-32HL42
CT-32HX42CT-36HL42
CT-36HX42
TQB2AA0422 20513
PRINTED IN USA
Televisor a color
Instrucciones de Operación
TQB2AA0422 20513
IMPRESO EN EE.UU.
For assistance, please call: 1-800-211-PANA (7262) or
send e-mail to: [email protected] (USA only)
Para asistencia llame al teléfono: 1-800-211-PANA (7262)
o envíe un correo electrónico a la dirección: 
[email protected] (Solo en Estados Unidos)
CT-32HL42
CT-32HX42CT-36HL42
CT-36HX42 
						

							WARNING: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance. The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:  TO REDUCE THE RISK OF  FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS  APPARATUS TO RAIN OR MOISTURE. 
ANY CHANGES OR MODIFICATIONS TO THIS TV 
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH 
WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.  FCC CAUTION:
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
This product incorporates U.S. Patent  6,266,098 B1; Issue date: July 24, 2001; assigned 
to Matsushita Electric Corporation of America; other U.S. and foreign patents pending.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2002 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law. 
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258 and 4482866.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
High Definition Sound
T he double  insulat ion sym bol  (a square within  a s quare) is  
int ended t o alert  qualif ied s ervice personnel to use only 
ident ical replacem ent part s in t his apparatus . 
						

							TABLE OF CONTENTS
1 l
Table of Contents
Congratulations ......................................................... 2
Customer Record ...................................................................... 2
Care and Cleaning..................................................................... 2
Specifications ............................................................................ 2
Installation.................................................................. 3
Television Location .................................................................... 3
Optional Cable Connections ...................................................... 3
AC Power Supply Cord.............................................................. 3
Cable / Antenna Connection...................................................... 3
Feature Chart ............................................................. 4
Auto Set Up Menu...................................................... 5
Optional Equipment Connections ............................ 6
VCR ........................................................................................... 6
Cable Box .................................................................................. 7
VCR and Cable Box .................................................................. 7
Amplifier (TO AUDIO AMP) ....................................................... 8
Front Control Panel ................................................................... 9
Program Out (PROG OUT) ..................................................... 10
Digital TV - Set-Top Box (DTV-STB) or DVD Players ............. 10
PIP and Split Operation .......................................... 11
Special Remote Buttons .......................................................... 13
Remote Control Operation 
(models CT-32HL42 and CT-32HL42 .................. 14
Mode Operational Key Chart ................................................... 15
Programming the Remote ....................................................... 17
Programming Without a Code ................................................. 17
Component Codes................................................................... 18
Remote Control Operation 
(models CT-32HX42 and CT-32HX42 ................. 22
Mode Operational Key Chart ................................................... 23
Programming the Remote ....................................................... 25
Programming Without a Code ................................................. 25
Component Codes................................................................... 26
Roller Guide Menu™ Navigation ............................ 28
Roller Guide Icons ................................................... 30
Roller Guide Icon Menus ......................................................... 30
Rollerguide Icon Menu Operation .......................... 31
Set Up...................................................................................... 31
Timer ....................................................................................... 34
Picture ..................................................................................... 35
Channel ................................................................................... 37
Audio ....................................................................................... 39
Lock ......................................................................................... 40
V-Chip Menu Operation........................................... 41
Troubleshooting Chart ............................................ 47
Limited Warranty ..................................................... 48
Customer Services Directory ................................. 50
Index ......................................................................... 51 
						

							2 l
CONGRATULATIONS
Congratulations
Your new television features state-of-the-art technology for high quality picture and sound with complete audio/video
connections for your home theater system. Your TV is designed to give you many years of enjoyment. It was thoroughly
tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the TV. You should note the model and serial number in
the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss.
Product registration for U.S. customers is available at:  www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Note:Do not spray any type of cleaning fluid directly on the screen.
Cabinet and Remote Control
rFor cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and
wipe dry.
rDo not use benzene, thinner or other petroleum based products. 
Specifications
Specifications are subject to change without notice or obligation 
Power Source
CT-32HL42 (3.6A)
CT-32HL42U (3.6A)
CT-32HX42 (3.6A)
CT-32HX42U (3.6A)
CT-36HL42 (3.6A)
CT-36HL42U (3.6A)
CT-36HX42 (3.6A)
CT-36HX42U (3.6A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
Video Output Jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector 
						

							INSTALLATION
3 l
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.
rAvoid excessive sunlight or bright lights, including reflections.
rKeep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
rFluorescent lighting may reduce remote control transmitting range.
rKeep away from magnetic equipment, including motors, fans and external speakers.
CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of
being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.  
CT-32HL42, CT-32HL42U :
CAUTION:
 These television receivers for use only with PANASONIC TY-32HL42P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-32HX42, CT-32HX42U:
CAUTION:
 These television receivers for use only with PANASONIC TY-32HX40P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36HL42, CT-36HL42U :
CAUTION:
 These television receivers for use only with PANASONIC TY-36HL42P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36HX42, CT-36HX42U:
CAUTION:
 These television receivers for use only with PANASONIC TY-36HX40P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
rUse 75-ohm coaxial shielded cables.
rUse appropriate input and output connectors, that match your component connectors.
rAvoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT
PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANT1 connection on back of television. Select cable
mode and ANT1 in SET UP menu under Prog Chan (Program Channels).
Note:A cable converter box may be required for proper reception. Check with your local cable company for
compatibility requirements.
Antenna Connections
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is
recommended.
•Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the
SET UP menu under Prog Chan.  
    
Polarized plug
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
  Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT 1 in the Set Up menu. 
						

							4 l
FEATURE CHART
Feature Chart 
 
MODELS
CT-32HL42
CT-32HX42
CT-36HL42
CT-36HX42
FEATURES
MENU LANGUAGE ENG/SPAN/FRrrrr
2 TUNER SPLITr r rr
2 TUNER PIPr r rr
VIDEO PICTURE MEMORYrrrr
VIDEO INPUT SKIPrrrr
CLOSED CAPTIONINGrrrr
V-CHIP CAPABILITY rrrr
DIGITAL SCAN RATE1080i,
480p1080i,
480p1080i,
480p1080i,
480p
NTSC LINE - DOUBLER480p480p480p480p
VIDEO NORMrrrr
AUDIO NORMrrrr
STEREOr    r    rr
AI SOUNDrrrr
BASS/BALANCE/TREBLEr    r    rr
SURROUNDrrrr
BBErrrr
A/V PROGRAM OUTrrrr
A/V IN (REAR/FRONT)4 (3/1)4 (3/1)4 (3/1)4 (3/1)
AUDIO OUTrrrr
S-VHS INPUT (REAR/FRONT)2/12/12/12/1
COMPONENT INPUT   2   2  2  2
IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR
OTHER FIXED IMAGE DISPLAYS.
WARNING: The marking or retained image on the picture tube resulting from viewing fixed
image is not an operating defect and as such is not covered by Warranty. 
This television is designed to display constantly moving images on the screen. Continuous viewing
of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an
image), stock market report bars (ticker running at the bottom of the screen), video game patterns,
fixed scoreboards, bright station logos, on-line (internet) or repetitive computer style patterns should
be limited.
The extended use of fixed image program material can cause a permanent picture tube damage,
shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube
deterioration can be limited by performing the following steps:
• Do not display the fixed image for extended periods of  time.
• Turn the power off when not in use.
 A/V 
JACKS
AUDIO
  SPECIAL 
FEATURES 
						

							AUTO SET UP MENU
5 l
Auto Set Up Menu
For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, 
follow the menus and procedures for setting up the features. 
rIDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.  
rMODE - To select TV (antenna) or CABLE mode depending on the signal source. 
rAUTO PROGRAM - To automatically program all channels with a signal.  
r
GEOMAGNETIC CORRECTION - This feature is used to adjust discoloration of the picture due to  earth’s magnetic
field in the area.
 
rTILT CORRECTION - 
This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.    rPress VOL u to select English, Spanish or French.
IDIOMA/LANGUE
GEOMAGNETIC CORRECTIONENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u u
uAUTO SET UP
TILT CORRECTIONu
rPress VOL u to select TV or CABLE.
IDIOMA/LANGUE
GEOMAGNETIC CORRECTIONENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u u
uAUTO SET UP
TILT CORRECTIONu
rPress VOL u to start Auto Programming.IDIOMA/LANGUE
GEOMAGNETIC CORRECTIONENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u u
uAUTO SET UP
TILT CORRECTIONu
IDIOMA/LANGUE
GEOMAGNETIC CORRECTIONENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u u
uAUTO SET UP
TILT CORRECTIONu
rPress VOL u to display adjustment menu.
rPress tVOL or VOL u to adjust discoloration
in picture.
GEOMAGNETIC CORRECTION
- - - - - - - - -  - - - - - - - - -
0
tTO ADJUSTu
PRESS ACTION TO EXITl
IDIOMA/LANGUE
GEOMAGNETIC CORRECTIONENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u u
uAUTO SET UP
TILT CORRECTIONu
rPress VOL u to display adjustment menu.
rPress tVOL or VOL u to adjust picture tilt. 
            TILT CORRECTION
0
tTO ADJUSTu
   PRESS      ACTION 
           TO      EXIT 
						

							6 l
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
VCR Connection 
Follow this diagram when connecting your television to a VCR only.
. 
Note:The remote control must be programmed with supplied codes to operate the VCR. 
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
rOption A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2 & COMP1, COMP2, etc.)
connected to your VCR.
3.  Begin the video.
rOption B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
rOption A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
rOption B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view. 
VCR
CABLES NOT SUPPLIEDCONNECTIONS ON BACK OF THE TV
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
L
R AUDIO OUTVIDEO OUT
ANT IN ANT OUT 
Incoming 
Cable
Use either the
S-Video or Video
connection.  
 OUT
INPUT 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7 l
Cable Box Connection 
Follow this diagram when connecting your television to a cable box only.
Note:The remote control must be programmed with supplied codes to operate the cable box.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions  ANT1 must be selected in the SET UP
menu under Prog Chan.  
VCR and Cable Box Connection  
Follow this diagram when connecting your television to both a VCR and a cable box.
Note:The remote control must be programmed with supplied codes to operate the VCR and cable box. 
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions  ANT1 must be selected in the SET UP
menu under Prog Chan.  
CONNECTIONS ON BACK OF THE  TV
CABLE BOX
INCOMING 
CABLE
CABLES NOT SUPPLIED
ANT OUTANT IN
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
 OUT
INPUT
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
 OUT
INPUT
CONNECTIONS ON BACK OF THE TV
CABLES NOT SUPPLIED Incoming 
Cable
CABLE BOX
ANT INANT OUT
VCR
L
R AUDIO OUTVIDEO OUT
ANT OUT ANT IN  
						

							8 l
OPTIONAL EQUIPMENT CONNECTIONS
VCR and Cable Box Connection (Contd.)
Recording a premium (scrambled) cable channel 
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note:To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a television program (except another premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.
Note:TO AUDIO AMP terminals can not be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the onscreen AUDIO menu. 
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. 
6. Volume, mute, bass, treble and balance are now controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
S-VIDEO
VIDEO
AUDIO
L
R VIDEOY
P
B
PR
PROG 
OUT
TO 
         AMPL
R
1 
23
COMPONENT ANT 1
ANT 2 SPLIT12
 AUDIO
   VIDEO INPUTS
 OUT
INPUT
CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV
External Amplifier