Panasonic Color Television Ct 2707 Operating Instructions

							PIP OPERATION WITH AVCR - NOCABLEBOX
9

PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second
picture.
Connect your television to a VCR, as shown:
Note:The Remote Control must be programmed with the supplied codes to operate the VCR.
Procedure
Turn the VCR OFF and tune the TV to channel 3.
Press thePIPbutton on the Remote Control to display the PIP frame on screen.
Note:The PIP picture is the same as the Main picture, initially.

Press theTV/VIDEObutton on the Remote Control to select the VIDEO PIP source.

Press theVCRbutton on the Remote Control and turn ON the VCR.

Press theTV/VCRbutton on the Remote Control.

Choose channels for
PIPframe by pressingVCR CHANNELup/down buttons on the Remote Control.

Choose channels for the
Main Pictureby pressing theTVbutton on the Remote Control and using the numeric keypad orCHup/
down buttons.
COMPONENT
VI DEO I NPUT
INPUT 1R AUDI OL
PBPRY/ VI DEO
TO AUDI O
AMP
L
R
R AUDI OLINPUT 2VI DEO S- VI DEO
L
R
VI DEO OUT
AUDI O OUT
ANT I NANT I N
ANT OUT
CONNECTION ON BACK OF TVVCR
Incoming
Cable
CABLES NOT SUPPLIED
SWAP and RECALL Buttons
TheSWAPbutton switches the PIP and Main Picture
source. Press theRECALLbutton for on screen PIP
and Main Picture source status. 
						

							10

PIP FUNCTIONBUTTONS
PIP Function Buttons
PIP (Picture-in-Picture) Button
Swap Button
Size Button
Move Button
Freeze Button
CH 2
PIP VIDEO 1 Main
picture
with
Audio
PIP
Frame
PIP Video
Source
Main Picture
Channel
Press to display PIP frame.

PressTV/VIDEObutton to select the same input to which the
external video source is connected.

Press PIP button again to cancel the PIP feature.
Note:Audio is from Main Picture only
PIPFF
CH 2
PIP VIDEO 1VIDEO 1
CH 2
Press (when PIP frame is displayed) to interchange the main
picture with the picture in the PIP frame.
SWAPPAUSE
Small PIP frame

Press (when PIP frame is displayed) to choose either the
large or small PIP frame.
SIZEPLAYMain Picture
Large PIP frame
The PIP frame may be placed at any corner of the Main Picture by pressing the button. Each
time the MOVE button is pressed, the PIP frame will move counterclockwise as illustrated.
MOVEREW
Main
Picture
PIP
Frame

Press tostopactionintheMainorPIPframe.
Note:
• Pressing FREEZE button when PIP frame is not displayed, will display a
snapshot image of the main picture in the PIP frame.
• Pressing FREEZE button when PIP frame is displayed, will freeze the
action in the PIP frame. Press the FREEZE button again to continue
action.
FREEZETV/VCR 
						

							REMOTECONTROLOPERATION
11

Remote Control Operation
(For model CT-2707D only)
EUR511511
POWER
Press to turn ON and OFF.
MUTE
Press to mute sound. Press to display and
cancel CC (Closed Caption)..
TV/VIDEO
Press to select TV or Video mode
Press to select remote operation.
T
V
V
C
RD
VDDB
S/
C
BL
ACTION
Press to access menus.
CH
Press to select next or previous channel and
navigate in menus.
VOL
Press to adjust TV sound and navigate in
menus.
RECALL
Press to display time, channel, sleep timer,
and other options.
EXIT
DBS functions button.
GUIDE
DBS functions button.
*MOVEREW*SIZEPLAY*PIPFF
*FREEZETV/VCRSTOP*SWAP
PAUSE
RECVCR/DBS CHANNEL
*PIP function buttons (top)
Component function buttons (bottom)
“0~9”
Press numeric keypad to select any channel.
R-TUNE
Press to switch to previously viewed
channel or video mode.
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries. 
						

							12

REMOTECONTROLOPERATION
Remote Control Operation
(For model CT-3207D only)
EUR511501
POWER
Press to turn ON and OFF.
MUTE
Press to mute sound. Press to display and
cancel CC (Closed Caption)..
TV/VIDEO
Press to select TV or Video mode
Press to select remote operation.
TVVC
RD
B
S/
CB
LDV
D
ACTION
Press to access menus.
“0~9”
Press numeric keypad to select any channel.
R-TUNE
Press to switch to previously viewed
channel or video mode.
CH
Press to select next or previous channel and
navigate in menus.
VOL
Press to adjust TV sound and navigate in
menus.
RECALL
Press to display time, channel, sleep timer,
and other options.
EXIT
DBS functions button.
GUIDE
DBS functions button.
*MOVEREW*SIZEPLAY*PIPFF
*FREEZETV/VCRSTOP*SWAP
PAUSE
RECVCR/DBS CHANNEL
*PIP function buttons (top)
Component function buttons (bottom)
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
*LIGHT
Press to illuminate remote buttons.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
*To prolong the life for the batteries, turn the light
off and on by pressing R-TUNE and RECALL
buttons, simultaneously. 
						

							REMOTECONTROLOPERATION
13

Mode Operational Key Chart
This chart defines the keys that are operational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after
programming (if needed).
KEY NAMETV MODECABLE MODEDBS MODE
POWERPOWERPOWERPOWER
MUTEMUTETV MUTETV MUTE
TV/VIDEOINPUT SWITCHTV INPUT SWITCHTV INPUT SWITCH
CH
CHANNEL UPCABLE CHANNEL UPDBS CHAN/NAVIGATION UP
CHCHANNEL DOWNCABLE CHANNEL DOWNDBS CHAN/NAVIGATION
DOWN
VOLVOL +TV VOL +DBS NAVIGATION RIGHT
VOLVOL -TV VOL -DBS NAVIGATION LEFT
ACTIONMENU/ENTER-DBS MENU
RECALLDISPLAYTV DISPLAYDBS PROG. INFO
EXIT--DBS EXIT
GUIDE--DBS GUIDE
1DIGIT 1DIGIT 1DIGIT 1
2DIGIT 2DIGIT 2DIGIT 2
3DIGIT 3DIGIT 3DIGIT 3
4DIGIT 4DIGIT 4DIGIT 4
5DIGIT 5DIGIT 5DIGIT 5
6DIGIT 6DIGIT 6DIGIT 6
7DIGIT 7DIGIT 7DIGIT 7
8DIGIT 8DIGIT 8DIGIT 8
9DIGIT 9DIGIT 9DIGIT 9
0DIGIT 0DIGIT 0DIGIT 0
R-TUNEPREVIOUS CHAN
OR VIDEO MODECABLE PREVIOUS
CHANNELPREVIOUS DBS CHANNEL
PIP
FFTV PIP ON / OFF--
FREEZE/TV/VCRTV PIP FREEZE-
STOP---
SWAP/PAUSETV PIP SWAP--
RECORD--
VCR/DBS CHANVCR CHANNEL UP-DBS PAGE DOWN
VCR/DBS CHANVCR CHANNEL DOWN-DBS PAGE UP 
						

							14

REMOTECONTROLOPERATION
Mode Operational Key Chart (cont’d)
KEY NAMEVCR MODEDVD MODE
POWERPOWERPOWER
MUTETV MUTETV MUTE
TV/VIDEOTV INPUT SWITCHTV INPUT SWITCH
ACTION--
CHAN UP-NEXT CHAPTER
CHAN DOWN-PREVIOUS CHAPTER
VOL RIGHTTV VOLUME +TV VOLUME +
VOL LEFTTV VOLUME -TV VOLUME -
RECALLONSCREEN VCR
DISPLAYDVD DISPLAY
EXIT--
GUIDE--
1--
2--
3--
4--
5--
6--
7--
8--
9--
0--
R-TUNE---
>
PA U S EVCR PAUSEDVD PAUSE
STOPVCR STOPDVD STOP
RECORDVCR RECORD-
TV/VCRTV/VCR SWITCHOPEN/CLOSE
VCR/DBS CHANVCR CHANNEL UPSLOW+
VCR/DBS CHANVCR CHANNEL DOWNSLOW - 
						

							REMOTECONTROLOPERATION
15

Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
Programming With a Code
Procedure
• Confirm that the external component is plugged in and operating.
• Turn the component off.
• Press and together,for at least 5 seconds.
• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.
Programming Without a Code
This procedure searches all codes and is called the “sequence method.”
• Confirm that the external component is plugged in and on.
• Turn the component off.
• Press and together,for at least 5 seconds.
• Press appropriate component button on the Remote Control.
• Press to move forward to the next code. Press to move backward.
• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.
Note:Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
• After the code is found, press to store the code.
Default Modes For Remote Control
DeviceOperatesDefault
TVTV (Panasonic Only)Panasonic TV Codes
VCRVCR (Preset)Panasonic VCR Codes
DBSDBS (Preset)Panasonic DBS Codes
CABLECABLE (Preset)Panasonic DBS Codes
DVDDVD, CD (Preset)Panasonic DVD Codes
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ACTIONPOWER
POWER
ACTIONPOWER
VOLVOL
POWER
ACTION 
						

							16

REMOTECONTROLOPERATION
BrandCode
Admiral135
Aiwa127, 132
Akai129, 114, 115, 1
Audio Dynamic139, 111
Bell & Howell105, 113
Broksonic120, 126
Canon123, 125
CCE143
Citizen106
Craig105, 129, 106
Curtis Mathes145, 124, 127
Daewoo143, 124, 175
DBX139, 110, 111
Dimensia145
Emerson143, 126, 119, 103, 125, 120
Fisher105, 108, 109, 107, 113
Funai120, 126. 127. 134
GE124, 133, 145
Go Video137, 151, 163
Goldstar106
Gradiente134, 156, 168, 170
Hitachi100, 123, 127, 145, 168
Instant Replay123, 124
Jensen139
JVC110, 111, 134, 139
Kenwood106, 110, 111, 134, 139
LG106
LXI100, 105, 106, 107, 108, 109,
127
Magnavox123, 124, 131
Marantz110, 111, 139
Marta106
Memorex109, 124
MGA138, 140, 141, 147, 148, 161
Minolta100, 145
Mitsubishi138, 140, 141, 147, 148, 1
Multitech137
NEC110, 111, 134, 139
Olympic123, 124
Optimus106, 121, 128, 135
BrandCode
Orion120, 126
Panasonic121, 122, 123, 124
Penney100, 105, 110, 111, 124, 139,
145,
Pentax100, 111, 145
Philco120, 123, 124, 126, 127, 143
Philips123, 124, 131, 173
Pioneer123
Proscan100, 101, 102, 123, 124, 131,
133, 145, 146, 174
Quasar121, 122, 123, 124
Radio Shack105, 109, 124, 127, 133, 136,
140
RCA
100, 101, 102,123, 124, 131,
133, 145, 146, 170, 172, 174,
176
Realistic105, 109, 124, 127, 136, 140
Samsung102, 104, 133, 137
Sansui120, 126, 139, 152
Sanyo105, 109, 113
Scott102, 104, 109, 120, 126, 138,
140, 147, 148
Sears100, 105, 106, 107, 108
Sharp135, 136, 137
Shintom11 7
Signature 2000127, 135
Singer11 7
Sony128, 129, 130
SV2000127
Sylvania1123, 124, 127, 131, 178
Symphonic127, 168, 177
Tashiro106
Tatung11 0 , 111 , 1 3 9
Teac110, 111, 127, 139
Te c h n i c s1121, 122, 123, 124
Teknika124, 127
Toshiba101, 146, 166
Vector Research111
Ward s106, 109, 135, 136
Yamaha105, 110, 111, 139
Zenith106, 169
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components
may not operate because the codes are not available due to limited memory. The Universal Remote Control does not
control all features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need
to program your Remote Control.
VCR DVD DBS CABLE
Codes For VCR 
						

							REMOTECONTROLOPERATION
17

Component Codes (contd.)
Codes for Cable Box
Codes for DVD
Codes for DBS
BrandCode
ABC224
Archer225, 232
Cableview205, 232
Citizen205, 222
Curtis212, 213
Diamond224, 225, 232
Eagle229
Eastern234
GCbrand205, 232
Gemini222
General
Instrument/
Jerrold211, 219, 220, 221, 222, 224,
225, 226, 227
Hamlin212, 218, 240, 241, 242, 245
Hitachi203, 224
Macom203, 204, 205
Memorex230
Movietime205, 232
Oak202, 237, 239
Panasonic209, 210, 214
Philips206, 207, 228, 229, 230
Pioneer201, 216
Pulsar205, 232
BrandCode
Puser232
RCA215
Realistic232
Regal212, 218, 240, 241, 242, 245,
249
Regency234
Rembrandt205, 232, 237
Samsung205
Scientific
Atlanta211, 212, 213
Slmark201, 205
Sprucer205, 210
Stargate205, 210
Telecaption248
Te l e v i e w201, 205
Texscan244
Tocom235, 236, 247
Unika225, 232
Universal222, 232
Videoway206
Viewstar229, 230
Zenith200, 227
Zenith/.Drake
Satellite200
BrandCode
Denon100
Ferguson101
JVC108
Mitsubishi105
Nordmende101
Panasonic100
Philips103
Pioneer102
BrandCode
RCA101
Saba101
Samsung11 0
Sharp108
Sony104
Thomson670
Toshiba103
Yamaha100
Zenith107
BrandCode
Dish Network
(Echostar)105
Echostar105
G. E .106
Gradiente11 4
Hitachi103, 111, 112
HNS (Hughes)103
BrandCode
Panasonic104
Philips101, 102
Primestar108
RCA106, 109, 110, 113
Sony107
Toshiba100
Uniden101, 102 
						

							18

ICONMENUNAVIGATION
Icon Menu Navigation
Press to display the icons.
Press to select desired icon.
Press to display selected
icon features.
Press to select feature.
Press
VIDEO ADJ.PICTURE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
NO
u-- -- -- I -- -- -- 
 -- -- -- -- ---- -- -- -- -- -- I -- --
 -- I -- -- -- -- -- -- I -- -- -- 
-- -- -- I -- -- -- 
OTHER ADJ.
VIDEO ADJ.PICTURE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
NO
u-- -- -- I -- -- -- 
 -- -- -- -- ---- -- -- -- -- -- I -- --
 -- I -- -- -- -- -- -- I -- -- -- 
-- -- -- I -- -- -- 
OTHER ADJ.
to adjust or activate feature.
BRIGHTNESS 32 -- -- -- I -- -- --
Press repeatedly to exit menus.
NORMAL PICTURE
EXIT
EXIT