Panasonic Color Cctv Camera Wv Cw964p Operating Instructions

-41- 3. Move the cursor to ALARM IN 2, and then tilt the
joystick left and right to select the operation the
camera should perform when an external signal is
received by ALARM IN 2. 
OFF :Ignore alarm input signals. 
2POSI :Move to preset position 2.  
SEQ :Start sequential movement. 
PATROL2 :Start PATROL 2.
PATROL2 (S) :Start PATROL 2, and maintain the
stored picture quality settings
(page 35) even after completion. 
AUTOTRACK2 :Move to preset position number 2,
and then perform auto tracking. 
4. Move...

SPECIAL SETTINGS
■Using the Special Setup Menu 
Display the special setup menu from the setup menu to
adjust picture quality.  
First, display the special setup menu. 
1. Display the setup menu (page 25), move the cursor
to SPECIAL O, and then press the CAM (SET)
button. 
This will display the special setup menu. 
*This section explains items qthrough ton the
special setup menu in that order. 
(1) Adjusting Picture Quality 
Use the following procedure to adjust picture quality. 
1.Move the cursor to...

-43- (3) This returns to the PIX OFF menu.
An asterisk (*) to the right of a PIX OFF number
indicates that the number has a blemish
compensation pattern assigned to it. 
To delete a blemish compensation pattern
(1) On the PIX OFF menu screen, select of the
pattern you want to delete, and press the CAM
(SET) button. 
This will display the blemish compensation
pattern setting screen. 
(2) Press the F3 button. 
(3) This returns to the PIX OFF menu. 
This will delete the blemish compensation
pattern and...

-44-
SCENE SELECT SETTING
■Using the Scene Select Setting
Menu 
Display the scene select setting menu from the setup
menu to configure scene select settings. First, display
the scene select setting menu. 
1. Display the setup menu (page 22), move the cursor
to SCENE SELECT O, and then press the CAM
(SET) button. 
This will display the scene select setting menu. 
●Scene Select Settings
See page 23 for information on the scene select
settings method.
     **SCENE SELECT**
SCENE         INDOOR(L)
 LOAD
 RET...

PASSWORD SETTINGS
■Password Lock Settings 
Set the password lock on the setup menu. 
●Turning Password Lock On and Off 
The password lock function can be used to allow only
authorized personnel to change camera settings. A
password must be input in order to turn password lock
on or off. 
ON :Prohibits changing any settings except for
the password lock function.
Selecting this setting limits camera
configuration changes to authorized personnel. 
OFF :Settings on all menus can be changed.
If you are using...

-46-
3. Move the cursor to NEW PASSWORD and press the
CAM (SET) button to display the password setting
menu. 
The password input screen will reappear if you
press the CAM (SET) button after inputting the
wrong password. If this happens, perform steps 2
and 3 again.
4. Input the new 3-digit password by moving the
cursor to each of the applicable numbers along the
top of the screen (0 to 9) and pressing the CAM
(SET) button for each digit. 
After you input all three digits, move the cursor to
OK. 
5. Press...

-47-
SHORTCUTS
Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button. 
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the
camera to a preset position by inputting the applicable position number on the 10-key pad. 
Notes:
•Turn off digital flip before...

-48-
Controller Operation Setting 
[1] + [7] + [0] + [CAM FUNCTION] IRIS: CLOSE
[1] + [7] + [1] + [CAM FUNCTION] SHUTTER: ON
[1] + [7] + [2] + [CAM FUNCTION] SHUTTER: OFF
[1] + [7] + [3] + [CAM FUNCTION] Increases shutter speed one step. 
[1] + [7] + [4] + [CAM FUNCTION] Decreases shutter speed one step. 
[1] + [7] + [5] + [CAM FUNCTION] AGC: ON
[1] + [7] + [6] + [CAM FUNCTION] AGC: OFF
[1] + [7] + [7] + [CAM FUNCTION] SENS UP: FIX ON
[1] + [7] + [8] + [CAM FUNCTION] SENS UP: FIX OFF
[1] + [7] + [9] +...

TROUBLESHOOTING
Before requesting service, check the following symptoms to see if you can solve the problem yourself. 
If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not
covered here, contact a quality service person or system installer. 
-49-
ProblemCause and Recommended ActionReference Pages
No picture (dark screen)
•Is the camera connected correctly? Check the
operating instructions that come with your system
controller. 
—
•Is the lens...

-50-
ProblemCause and Recommended ActionReference Pages
Poor picture color 
•Is the dome cover or lens of the camera dirty? If so,
clean them. 7
•Use the special setup menu to adjust picture
quality.42
•Check the white balance setting. 29
Image flicker •If Super Dynamic 3is turned on, turn it off. 26-27
Afterimages in 
the picture •Check the DNR setting.  29
Black and white picture•The camera has an auto black and white switching
mode function. Check the setting of this mode. 29
Frequent switching...