Panasonic Color Cctv Camera Wv Cs854b Operating Instructions

-51-
Note:
Use the cable that is described below for RS485
site communication.
•Shielded, twisted pair cable
•Low impedance
•Wire gauge size is thicker than AWG #22 
(0.33 mm
2).
•ALARM IN Connections
An 8-pin and a 4-pin harness are supplied with the
camera as standard accessories. Connect external
sensors to this connector. Input specifications are
low-active, non-voltage contact (ON when active) or
open collector (Low when active). The table below
shows wire colors versus pin functions.Note:Use a...

SYSTEM CONNECTIONS
Note:When any peripherals are turned off and turned on again, the camera is also turned off and turned back on.
-52-
123456789MO N C A M
ESC SET0ACK
RESETBACK
SEQFORWARD
SEQ ALTDEC
–1CAMINC
+1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
NEAR ZOOM
TELE
FAR WIDESystem Controller WV-CU550550BLEFT RIGHTUP
DOWN
ALARMBUSYF3F4F2F1AF123456789MO N C A M
ESC SET0ACK
RESETBACK
SEQFORWARD
SEQ ALTDEC
–1CAMINC
+1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
NEAR ZOOM
TELE
FAR WIDESystem Controller...

Auto Focus
Cleaning Effective Pixels
2 outputs (ALARM/AUX1, B/W/AUX2) open collector - output max. 16 V DC 
100 mA OFF (OPEN)/ON (0 V) Alarm OUT4 inputs (ALARM IN 1 - 4) pulled up to 5.0 V DC OFF (open or 4 V DC - 5 V
DC)/ON (0 V 0.2 mA) Alarm IN
Power Source
MANUAL/AUTO
OFF/SEQ/SORT/AUTO PAN/PATROL
SEQ/SORT/AUTO PAN/PATROL PLAY
ON/OFF
preset ID, camera ID, area title : up to 16 characters
ON/OFF
AUTO/ON/OFF
ON/OFF, up to 8 zones
ON/OFF
LEARN/PLAY/STOP, up to 60 seconds
ON/OFF
Image Hold ON/OFF Auto...

-54-
Controls Panning Range
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.360°endless
possible (in auto-pan mode)
manual/sequential position/sort position/auto pan
manual : approx. 0.1°/s - 120°/s 8-steps/64-steps
sequence position : maximum approx. 300°/s
0°to 180°(–5°to 185°at 5°tilt angle setting)
manual/sequential position/sort position
manual : approx. 0.1°/s - 120°/s. 8-steps/64-steps
sequential position : maximum approx. 300°/s
pan/tilt,...

APPENDIX
Shortcuts
Shortcut operations are available for controllers having the CAM FUNCTION key. Entering from one to three digits
with the numeric key(s) and pressing the CAM FUNCTION key will create a shortcut to the respective functions. The
CAM FUNCTION key is abbreviated as [CAM FUNC] in the table below.
-55-
Notes:
•Shortcut operations marked with * will change parameter settings only. Actual operation takes place when the
conditions for the changed settings are met.
•When entering a shortcut...

PANASONIC CANADA INC.5770 Ambler Drive, Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, 
P.R. 00985 (809)750-4300
Panasonic Digital Communications & Security CompanyUnit of Matsushita Electric Corporation of America
Security Systems Groupwww.panasonic.com/cctvExecutive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094Zone Office
Eastern:One Panasonic...