Home > Panasonic > Camera > Panasonic Color Cctv Camera Wv Cs854b Operating Instructions

Panasonic Color Cctv Camera Wv Cs854b Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Color Cctv Camera Wv Cs854b Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							-51-
    Note:
    Use the cable that is described below for RS485
    site communication.
    •Shielded, twisted pair cable
    •Low impedance
    •Wire gauge size is thicker than AWG #22 
    (0.33 mm
    2).
    •ALARM IN Connections
    An 8-pin and a 4-pin harness are supplied with the
    camera as standard accessories. Connect external
    sensors to this connector. Input specifications are
    low-active, non-voltage contact (ON when active) or
    open collector (Low when active). The table below
    shows wire colors versus pin functions.Note:Use a relay if the voltage or current of the
    connected device exceeds the ratings.
    GND Brown
    Red
    Data transmission
    Data receptionOrange
    Yellow
    Green
    T (B)
    T (A)
    R (B)
    R (A)
    •RS485 Connection
    Black
    Brown
    Red
    Orange
    Yellow
    Light blue or green
    Blue
    PurpleWire color Function
    IN 1
    GND
    IN 2
    GND
    IN 3
    GND
    IN 4
    GND
    Alarm IN (8-pin)
    •ALARM OUT Connections
    Connect an external device, for example, a buzzer
    or lamp, to this connector. Output specifications are
    low-active, open-collector and a drive capacity of
    16 V DC 100 mA maximum. The table below shows
    wire colors versus pin functions.
    Grey
    White
    Pink
    Yellow green or light blueWire color Function
    OUT 1
    GND
    OUT 2
    GND
    Alarm OUT (4-pin) 
    						
    							SYSTEM CONNECTIONS
    Note:When any peripherals are turned off and turned on again, the camera is also turned off and turned back on.
    -52-
    123456789MO N C A M
    ESC SET0ACK
    RESETBACK
    SEQFORWARD
    SEQ ALTDEC
    –1CAMINC
    +1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
    NEAR ZOOM
    TELE
    FAR WIDESystem Controller WV-CU550550BLEFT RIGHTUP
    DOWN
    ALARMBUSYF3F4F2F1AF123456789MO N C A M
    ESC SET0ACK
    RESETBACK
    SEQFORWARD
    SEQ ALTDEC
    –1CAMINC
    +1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
    NEAR ZOOM
    TELE
    FAR WIDESystem Controller WV-CU550550BLEFT RIGHTUP
    DOWN
    ALARMBUSYF3F4F2F1AF123456789MO N C A M
    ESC SET0ACK
    RESETBACK
    SEQFORWARD
    SEQ ALTDEC
    –1CAMINC
    +1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
    NEAR ZOOM
    TELE
    FAR WIDESystem Controller WV-CU550550BLEFT RIGHTUP
    DOWN
    ALARMBUSYF3F4F2F1AF123456789MO N C A M
    ESC SET0ACK
    RESETBACK
    SEQFORWARD
    SEQ ALTDEC
    –1CAMINC
    +1CAM STOP12AUXCLOSE OPENIRISPRESETFOCUS
    NEAR ZOOM
    TELE
    FAR WIDESystem Controller WV-CU550550BLEFT RIGHTUP
    DOWN
    ALARMBUSYF3F4F2F1AF
    Digital Disk
    Recorder
    WJ-HD
    Digital Disk
    Recorder
    WJ-HD
    Digital Disk
    Recorder
    WJ-HD
    Digital Disk
    Recorder
    WJ-HD
    Max. 64 cameras
    Monitors (up to 16) Printer
    System controller Combination camera
    Matrix
    switcher Personal computer
    RS-232C port
    System status
    monitor Alarm inputs
    Digital Disk Recorders 
    						
    							Auto Focus
    Cleaning Effective Pixels
    2 outputs (ALARM/AUX1, B/W/AUX2) open collector - output max. 16 V DC 
    100 mA OFF (OPEN)/ON (0 V) Alarm OUT4 inputs (ALARM IN 1 - 4) pulled up to 5.0 V DC OFF (open or 4 V DC - 5 V
    DC)/ON (0 V 0.2 mA) Alarm IN
    Power Source
    MANUAL/AUTO
    OFF/SEQ/SORT/AUTO PAN/PATROL
    SEQ/SORT/AUTO PAN/PATROL PLAY
    ON/OFF
    preset ID, camera ID, area title : up to 16 characters
    ON/OFF
    AUTO/ON/OFF
    ON/OFF, up to 8 zones
    ON/OFF
    LEARN/PLAY/STOP, up to 60 seconds
    ON/OFF
    Image Hold ON/OFF Auto Mode
    Auto Pan Key
    Digital Flip
    Camera ID
    Motion Detector
    B/W Mode
    Privacy Zone
    Proportional PAN/TILT
    Patrol
    -53-
    SPECIFICATIONS
    Dimensions24 V AC, 60 Hz
    120 (D) x 191 (H) mm
    (4-3/4 (D) x 7-1/2 (H))
    approx. 2 
    kg (4.4 lbs)
    −10°C - +50°C (14°F - 122°F) 13 W Power Consumption
    Ambient Operating
    Temperature
    Weight
    Horizontal Scanning
    Frequency
    48 dB (Super Dynamic 
    2ON)
    Zoom Ratio3.65 mm (H) x 2.74 mm (V), 1/4 in. 768 (H) x 494 (V)
    Focus Speed WV-CS854B
    15.734 kHz
    F1.6 - 22, CLOSE Focal Length
    Super Dynamic 
    2selectable ON/OFF (SETUP MENU)
    x 22 +digital zoom x10 internal/line-lock / multiplexed vertical drive (VD2)
    59.94 Hz
    1.0 V [P-P] NTSC composite/75 Ω
    more than 480 lines at center (C/L, NORMAL), more than 510 lines at center
    (C/L, HIGH), 570 lines at center (B/W)
    more than 350 lines at center
    50 dB (AGC OFF, weight on)
    1 lx (0.1 foot-candle) C/L at SENS UP OFF (AGC HIGH)
    0.06 lx (0.006 foot-candle) with PIX SENS UP OFF, B/W, SENS UP OFF (AGC HIGH)
    0.03 lx (0.003 foot-candle) with PIX SENS UP B/W at SENS UP OFF (AGC HIGH)
    approx. 4.5 s (TELE/WIDE) in manual mode
    approx. 5 s (FAR/NEAR) in manual mode
    automatic (open/close is possible)/manual
    1 : 1.6 (WIDE) - 3.0 (TELE)
    3.79 - 83.4 mm
    2.6°- 52.3°
    2.0°- 39.9°
    1/60 (OFF), AUTO 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s Scanning Area
    Synchronization
    Vertical Scanning
    Frequency
    Video Output
    Horizontal Resolution
    Vertical Resolution
    Signal-to-Noise Ratio
    Minimum Illumination
    Zoom Speed
    Iris
    Maximum Aperture Ratio
    Angular Field
    of ViewH
    V
    Electronic Shutter
    Iris Range
    Dynamic Range
    MAX 32 times, AUTO/FIX Sens Up
    ON (LOW)/ON (MID)/ON (HIGH)/OFF AGC 
    						
    							-54-
    Controls Panning Range
    Weights and dimensions indicated are approximate.
    Specifications are subject to change without notice.360°endless
    possible (in auto-pan mode)
    manual/sequential position/sort position/auto pan
    manual : approx. 0.1°/s - 120°/s 8-steps/64-steps
    sequence position : maximum approx. 300°/s
    0°to 180°(–5°to 185°at 5°tilt angle setting)
    manual/sequential position/sort position
    manual : approx. 0.1°/s - 120°/s. 8-steps/64-steps
    sequential position : maximum approx. 300°/s
    pan/tilt, lens, 64 preset positions, home position Panning Angle Setting
    Panning Mode
    Panning Speed
    Tilting Range
    Tilting Mode
    Tilting Speed
    ACCESSORIES
    Operating Instructions (this document)  ................ 1 pc.
    The following parts are for installation:
    Decoration Cover .................................................. 1 pc.
    Alarm In Cable  ...................................................... 1 pc.
    Alarm Out Cable  ................................................... 1 pc.
    Connector for 24 V AC .......................................... 1 pc.
    OPTIONAL ACCESSORIES
    Dome Cover (approx. 60 % transparency, smoked type)  ................. WV-CS2S
    Dome Cover (approx. 50 % transparency, smoked type)  ................. WV-CS2SH
    Dome Cover (approx. 70 % transparency, metal type)  ..................... WV-CS2M 
    						
    							APPENDIX
    Shortcuts
    Shortcut operations are available for controllers having the CAM FUNCTION key. Entering from one to three digits
    with the numeric key(s) and pressing the CAM FUNCTION key will create a shortcut to the respective functions. The
    CAM FUNCTION key is abbreviated as [CAM FUNC] in the table below.
    -55-
    Notes:
    •Shortcut operations marked with * will change parameter settings only. Actual operation takes place when the
    conditions for the changed settings are met.
    •When entering a shortcut marked with **, NO REGS. ; FLIP ON may appear on the monitor. Re-enter the
    shortcut.
    •Shortcuts may be ignored while PAN/TILT, ZOOM or FOCUS is in operation.
    •PATROL LEARN saves only [1] through [6]+[4], [1]+[6]+[9] and [1]+[7]+[0] in the memory.
    •PATROL PLAY stops when a shortcut other than [1]+[6]+[9] or [1]+[7]+[0] is entered. 
    Selecting a PRESET position From #1 to #64
    #1 [1] + [CAM FUNC]
    #10 [1] + [0] + [CAM FUNC]
    #64 [6] + [4] + [CAM FUNC]
    AUTO PAN
    ON [6] + [5] + [CAM FUNC]
    OFF [6] + [6] + [CAM FUNC]
    Speed Up [6] + [7] + [CAM FUNC]
    Speed Down [6] + [8] + [CAM FUNC]
    Setting Start Point [6] + [9] + [CAM FUNC]
    Setting End Point [7] + [0] + [CAM FUNC]
    Setting PAN Reverse [7] + [4] + [CAM FUNC]
    AUTO MODE
    MODE Off [7] + [1] + [CAM FUNC]
    SEQ On [7] + [2] + [CAM FUNC]
    SORT On [7] + [3] + [CAM FUNC]
    ENDLESS PAN
    On [7] + [6] + [CAM FUNC]
    Off [7] + [7] + [CAM FUNC]
    DIGITAL FLIP
    On [7] + [8] + [CAM FUNC]
    Off [7] + [9] + [CAM FUNC]
    PROP. PAN/TILT
    On [8] + [0] + [CAM FUNC]
    Off [8] + [1] + [CAM FUNC]
    SUPER-D2
    On [8] + [4] + [CAM FUNC]
    Off [8] + [5] + [CAM FUNC]
    AUTO FOCUS
    STOP AF On* [8] + [6] + [CAM FUNC]
    STOP AF Off* [8] + [7] + [CAM FUNC]
    AF On (Activate) [8] + [8] + [CAM FUNC]
    HOME POSITION
    Move to HOME [8] + [9] + [CAM FUNC]
    B/W or C/L
    B/W On* [9] + [0] + [CAM FUNC]
    B/W Off* [9] + [1] + [CAM FUNC]
    B/W AUTO* [9] + [2] + [CAM FUNC]
    CAMERA ID
    On [9] + [3] + [CAM FUNC]
    Off [9] + [4] + [CAM FUNC]
    AREA TITLE
    NESW On [9] + [5] + [CAM FUNC]
    USER On [9] + [6] + [CAM FUNC]
    TITLE Off [9] + [7] + [CAM FUNC]
    EL-ZOOMOn [9] + [8] + [CAM FUNC]
    Off [9] + [9] + [CAM FUNC]
    RESTART
    Begin [1] + [0] + [0] + [CAM FUNC]
    Memorize PRESET From #1 to #64**
    Position #1 [1] + [0] + [1] + [CAM FUNC]
    Position #10 [1] + [1] + [0] + [CAM FUNC]
    Position #64 [1] + [6] + [4] + [CAM FUNC]
    PATROL
    PLAY [1] + [6] + [5] + [CAM FUNC]
    STOP [1] + [6] + [6] + [CAM FUNC]
    LEARN(Start) [1] + [6] + [7] + [CAM FUNC]
    IRIS
    Open [1] + [6] + [9] + [CAM FUNC]
    Close [1] + [7] + [0] + [CAM FUNC]
    EL-SHUTTER
    On [1] + [7] + [1] + [CAM FUNC]
    Off [1] + [7] + [2] + [CAM FUNC]
    Speed Up [1] + [7] + [3] + [CAM FUNC]
    Speed Down [1] + [7] + [4] + [CAM FUNC]
    AGC
    On [1] + [7] + [5] + [CAM FUNC]
    Off [1] + [7] + [6] + [CAM FUNC]
    SENS UP
    On [1] + [7] + [7] + [CAM FUNC]
    Off [1] + [7] + [8] + [CAM FUNC]
    Up [1] + [7] + [9] + [CAM FUNC]
    Down [1] + [8] + [0] + [CAM FUNC]
    SENS UP AUTO
    On [1] + [8] + [1] + [CAM FUNC]
    Off [1] + [8] + [2] + [CAM FUNC]
    Up [1] + [8] + [3] + [CAM FUNC]
    Down [1] + [8] + [4] + [CAM FUNC]
    LL SYNC phase
    INC [1] + [8] + [5] + [CAM FUNC]
    DEC [1] + [8] + [6] + [CAM FUNC]
    PAN
    180°turn [1] + [8] + [7] + [CAM FUNC]
    CLEANING
    On [1] + [8] + [8] + [CAM FUNC]
    Off [1] + [8] + [9] + [CAM FUNC]
    BW SW AUTO
    10 sec. [1] + [9] + [0] + [CAM FUNC]
    30 sec. [1] + [9] + [1] + [CAM FUNC]
    60 sec. [1] + [9] + [2] + [CAM FUNC]
    300 sec. [1] + [9] + [3] + [CAM FUNC]
    Function Key Function Key 
    						
    							PANASONIC CANADA INC.5770 Ambler Drive, Mississauga, 
    Ontario, L4W 2T3 Canada (905)624-5010
    PANASONIC SALES COMPANY
    DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
    San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, 
    P.R. 00985 (809)750-4300
    Panasonic Digital Communications & Security CompanyUnit of Matsushita Electric Corporation of America
    Security Systems Groupwww.panasonic.com/cctvExecutive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094Zone Office
    Eastern:One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303Central:1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205Western:6550 Katella Ave., Cypress, CA 90630 (714) 373-7840
    Printed in Japan2003     © Matsushita Electric Industrial Co., Ltd.  All rights reserved.N0803-0      3TR001737BAA       Imprimé au Japon 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Color Cctv Camera Wv Cs854b Operating Instructions