Panasonic Color CCTV Camera WV CS584 WV CW594 Wv Cs580 Wv Cs590 Series Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Color CCTV Camera
Model No. WV-CW590/GWV-CW594E
WV-CS580/G WV-CS584E
WV-CS580/G
WV-CS584E  
WV-CW590/G 
WV-CW594E 

2
CONTENTS
Preface  ..................................................................3
RS485 setup  .............................................................. 4
About the setup menus  ...................................................... 5
n Displaying the Setup Menu ................................................ 5
n Camera ID Settings ...................................................... 5
n Scene Select Settings ....................................................6
n Preset Position...

3
About the user manuals
There are 2 sets of operating instructions for the WV-CW590/G, WV-CW594E, WV-CS580/G, WV-CS584E as follows.
	 •	 Installation	Guide:	Explains	how	to	install	and	connect	devices.
	 •	 Operating	Instructions	(PDF):	Explains	how	to	perform	the	settings	and	how	to	operate	this	camera.
Adobe
® Reader®	is	required	to	read	these	operating	instructions	(PDF)	on	the	provided	CD-ROM.	
When the Adobe® Reader® is not installed on the PC, download the latest Adobe® Reader® from the Adobe web...

4
RS485 setup 
The  following  procedure  is  to  configure  the  RS485 
setup  when  using  the  system  controller  to  control  the 
camera	(pan,	tilt,	etc.)	via	the	camera's	data	port.	
	1.	 Display	the	advanced	 setup	menu	(page	 8),	move	
the	 cursor	 to	COMMUNICATION	
,  and  then  press 
the	CAM	(SET)	button.	
    This will display the RS485 setup menu. 
	2.	 Check	the	unit	number.	(Installation	Guide)
	 	 The	 UNIT	NUMBER	 item	shows	 the	unit	 number 	
specified by DIP Switch 1.
    The...

5
About the setup menus 
This  manual  describe  procedures  for  operating  system 
controller WV-CU650.
All  setting  configuration  procedures  start  from  the  setup 
menu.	This	section	 explains	 how	to	display	 the	setup 	
menu  and  provides  details  about  the  menu  items  that  it 
contains. 
n Displaying the Setup Menu 
l    When using the WV-CU650
	 (1)	 S e l e c t 	t h e 	c a m e r a 	( t h i s 	c a m e r a ) , 	a n d 	t h e	
monitor where displays the setup menu. 
	 (2)	 Press 	the 	MENU...

6
n Scene Select Settings
Display  the  scene  select  setting  menu  from  the  setup 
menu	to	configure	 scene	select	settings.	 First,	display	
the scene select setting menu. 
	1.	 Display	 the	advanced	 setup	menu	(page	 8),	move	
the	cursor	to	SCENE	SELECT	
, and then press the 
CAM	(SET)	button.	
    This will display the scene select setting menu. 
l Scene Select Settings
Use  the  following  procedure  to  configure  scene  select 
settings. 
	1.	 Move	 the	cursor	 to	SCENE,	 and	then	 tilt	the...

7
 2.  Move the cursor to  →PUSH	SET	to	the	 right	 of	PAN/
TILT, 	and 	then 	press 	the 	CAM 	(SET) 	button 	to	
display	the	PAN/TILT	setting	menu.	
  3.  Use  the  joystick  to  position  the  camera,  and  then 
press	the	CAM	(SET)	button.	
  4.  Move  the  cursor  to  →  PUSH  SET  to  the  right  of 
ZOOM/FOCUS,	 and	then	 press	 the	CAM	 (SET)	
button	to	display	the	ZOOM/FOCUS	setting	menu.	
  5.  Move  the  joystick  left,  right,  up  and  down  to  adjust 
the  position  of  the  lens  focus,...

8
3.  Use the joystick to move the cursor the character you 
want	to	input,	and	then	press	the	CAM	(SET)	button.	
	 	 The	 text	input	 procedure	 is	the	 same	 as	that	 for	
camera ID input. 
    See  steps  3  through  5  under  “Camera  ID  Settings” 
on	page	 5	for	 information	 about	inputting	 the	text	 for	
the  preset  ID  and  specifying  its  position  on  the 
display. 
  To copy the preset ID of another position number 
	 	 Move	 the	cursor	 to	COPY,	 and	then	 press	 the	CAM	
(SET) 	button....

9
Camera settings
n Using the Camera Setup Menu 
Display  the  camera  setup  menu  from  the  setup 
m e n u	( A d v a n c e d 	M e n u ) 	t o 	c o n f i g u re 	c a m e r a	
settings	(page	8).	
  1. Display  the  advanced  setup  menu (page	 8),  move 
the  cursor  to  CAMERA
 ,  and  then  press  the  CAM 
(SET)	button.
    This will display the camera setup menu. 
	 *	 The	 following	 sections	numbered	 1  to  A	explain	
how to use each of the camera setup menu items. 
 
1  Camera ID (CAMERA ID)
S e...

10
  AUTO : This setting, by moving the shutter automatical- 
    ly when necessary, provides a clearer picture  
	 			of	extremely	bright	objects	outdoors,	etc.		
  OFF  : 	 Fixed	at	1/50	seconds.
	 	 The	factory	default	setting	is	AUTO.
Notes:
•		 	When 	AUTO 	is 	selected 	for 	the 	shutter 	setting,	
fluorescent  lighting  may  cause  flickering  of  the 
picture.	 If	this	 happens,	 select	OFF	for	the	 shutter	
speed setting.
•		 AUTO 	is 	disabled 	when 	MANUAL 	is 	selected 	for 	
light	 control...