Panasonic Color CCTV Camera Wv Cp600 WV CP620 WV CP604E WV CP624E Series Installation Guide

11
Locally procure the screws
Screws are not supplied with this product. 
Prepare the screws according to the material, 
structure, strength and other factors of the 
mounting area and the total weight of objects  
to be mounted.
Screw tightening
 • The  screws  and  bolts  must  be  tightened  
with an appropriate tightening torque 
according to the material and strength of 
the installation area.
 • Do  not  use  an  impact  driver.  Failure  to 
observe this may cause overtightening 
and consequently...

12
Major operating controls and their functions
(Side view)(Bottom view)
(Rear view) 

4
5
UPSET7
123
220 V-240 V    ~50/60 HzVIDEO OUT
2
1
8
3
24V~IN2-N1-L123
12VIN-,VIDEO OUT6
82
3
(UP)UP
(DOWN)SET
(LEFT)(RIGHT)
1   AC power input terminal [220 V-240 V 
   ~50/60 Hz]
   
Connect with the supplied power cord.
2   Video output connector [VIDEO OUT] 
  Provides video output to system units.
3  Tripod mount base
   This is used to install the camera onto the  
mount bracket (locally procured).
4  ALC lens...

13
Installation and connection
1 Rotate the lens (option) clockwise slowly to mount the lens.
Important:
 • CS-mount lens can be used on this camera. For use of C-mount lens, use the C-mount adap-
tor (option).
 • For  prevention  of  damage  to  the  camera  body,  use  a  lens  with  protrusion  of  5.5  mm  or  less  
from the flange surface. 
Protrusion from mount: 
20 mm or less
Protrusion from flange:  
5.5 mm or less
Optional dedicated lens
Lens typeModel No.
ALC lens for 1/3-type CCD cameras2x...

14
3 Installation of safety wire
  The following example shows the installation of safety wire:
Important:
 • Be  sure  to  install  safety  wire  between  the  camera  and  the  installation  position  to  prevent  
unexpected injury caused by fallen camera.
 • Ensure that the safety wire is installed. Consult the dealer about installation.
 Attach the safety wire lug (accessory) to the screw hole of the mount 
base with screw (accessory).
1  Loosen one screw in the front portion of the  
camera upper...

15
Camera mount
bracket  
(locally procured)
Screws 
(locally procured)
 Screws 
(locally procured)
 

4  Installation of camera mount bracket (locally procured)
Secure the camera mount bracket (locally procured) to the installation position, and mount the 
camera on the camera mount bracket.
Prepare mounting screws according to the material of the area where the camera mount 
bracket (locally procured) is to be installed. The installation method may be different depending 
on the material of the...

16
5   Mount the camera on the camera mount bracket
Follow the instruction of camera mount bracket to mount the camera on the camera mount  
bracket, and aware of the followings:
 • Be  sure  to  install  the  tripod  mount  base  and  safety  wire  before  attaching  the  camera  to  the 
camera mount bracket.
 • Change  the  tripod  mount  base  position  when  attaching  the  camera  to  the  ceiling  mount 
bracket. Observe the following precautions at this time.
   If it is needed to restore the...

17
6 Attach safety wire (accessory) to the ceiling or wall.
Attach the safety wire to the foundation or other parts of the building with sufficient strength  
(minimum pull-out strength 196 N).
Prepare screws according to the condition of the attachment position. Use the safety wire 
(accessory), washer (accessory) and spring washer (accessory).

   
Ceiling
Recommended screw M4, 
minimum pull-out strength 
196 N  
Washer (accessory) 
Spring washer (accessory) 
Safety wire (accessory)

Washer...

18
7 Connect the video output.
Important:
 • Be sure to turn off the power of each device before connecting. 
 • Be sure to secure the coaxial cable connectors. 
   Connect a coaxial cable (locally procured) to the video output connector. 
To video input 
Coaxial cable123
220 V-240 V     ~50/60 HzVIDEO OUT
h Connect external devices to the external I/O terminal.
   When connecting an external device, remove 9 mm to 10 mm of the  
outer  jacket  of  the  cable  and  twist  the  cable  core  to  prevent...

19

Safety wire
Camera mount bracket   
(option)
The cable shall be 
tied to the camera 
mount bracket by 
cable tie.
Safety wire
Camera 
mount 
bracket 
(option)
The cable 
shall be tied 
to the camera 
mount bracket 
by cable tie.
j Turn on the power.
   WV-CP600/G, WV-CP620/G
   Use the power cord (accessory) to connect the power supply.
Important:
	 •	 The	included	power	cord	is	the	dedicated	power	cord	of	this	product.	Do	not	use	it	with	other	
devices.
Caution:
	•	The	camera	shall	be	connected	with...

20
Important:
 • Check whether the cord core is fully inserted into the  
power cord plug.
    
    24 V AC 12 V DC 
  -   2-N    (GND)
 +   1-L ⊕
 3 Tighten the screw of the power cord plug.
  4 Connect the power cord plug to the power supply  
terminal on the rear side of the camera.
Important:
 • Make sure that the power cord plug is inserted fully into 
the power supply terminal.
Connection of power cord
When connecting the power cord, use connectors that are designed for the power cord, and be...