Panasonic Color Cctv Camera Wv Cp500 Operating Instructions

Before attempting to connect or operate this product,  
please read these instructions carefully and save this manual for future\
 use. 
No model number suffix is shown in this manual. 
 
Operating Instructions
Color CCTV Camera
Model No.  WV-CP500
WV-CP504
This illustration represents WV-CP500. Lens: Option 

2
Preface
About the user manuals
The operating instructions of the camera consist of 2 sets: these operat\
ing instructions (PDF) and Installation Guide. 
This document explains how to configure the settings of the camera. 
Refer to the installation guide for further information about how to install the camera. 
Adobe
®  Reader®  is  required  to  read  PDF.  When  the  Adobe®  Reader®  is  not  installed  on  the  PC,  download  the  latest  Adobe® 
Reader® from the Adobe web site and install it....

3
Contents
Preface ........................................................................\
.......    2
About the user manuals  .................................................    2
Trademarks and registered trademarks  .........................    2
About the setup menus.......................................................    4 Setup menu list  ..............................................................    4
Basic operation  ..............................................................    5...

4
About the setup menus
Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each 
item in accordance with the conditions of the camera shooting area. 
The following is an example of setup procedure when LANGUAGE is set to ENGLISH. 
Setup menu list
 Setup item
  Description
 
Reference 
      Pages
  CAMERA ID  This item specifies the camera title. The camera title that indicates th\
e camera loca-
tion and other information about the...

5
Basic operation
The description below explains how to operate the setup menu basically. 
The  operations  in  the  setup  menu  are  performed  with  the  operation  buttons  after  calling  up  the  setup  menu  on  the  connected 
video monitor. Refer to the installation guide for further information about the operation buttons. 
The operations in the setup menu can also be performed through the system controller (option). 
    
Screenshot 1
Hold  down  the  setting  button  for  approx.  2  seconds...

6
Screen transition diagram
 MODEL   WV-CP500 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
BACK-FOCUS   
SPECIAL
LANGUAGE
 
 END   SETUP ENABLE
    **CAMERA SETUP** 
SCENE1
 ALC/ELC      ALC    
 SHUTTER      OFF
 AGC          ON(HIGH)
 SENS UP      OFF
 WHITE BAL    ATW1
 DNR          HIGH
 BW MODE      AUTO1
 i-VMD
 RET TOP END
    **SYSTEM SETUP** 
SYNC          INT
ALARM IN/OUT
    
PRIVACY ZONE  OFF
STABILIZER    OFF
EL-ZOOM       OFF
 RET TOP END
  **BACK-FOCUS SETUP**  
ABF           PUSH SW...

7
Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that indicates the camera location and other information about the camera 
is created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters. 
Follow the procedure below to specify the camera title. Step 1
Select "ON" for "CAMERA ID", and then press the setting button. 
  →  The "CAMERA ID" appears. 
Important:
	 •	 When	"CAMERA...

8
Camera operation setting [CAMERA SETUP]
The  following  describes  the  camera  operation  settings.  The  following  settings  can  be  configured  on  the  "CAMERA  SETUP" 
screen displayed from the top screen. 
Refer to page 5 for how to call up the screen. 
The settings configured on the "CAMERA SETUP" screen will be saved as a scene file. 
1. Register a scene file [SCENE1/SCENE2]
It is possible to register 2 patterns of scene file. For example, when different settings are to be...

9
Step 5
Move the cursor to "SCENE1" and press the right or left button to select "SCENE1" to resume normal operation. 
Important:
	 •	 When	 "SCENE2"	 is	set	 for	"ALARM	 IN",	the	"SCENE	 X	(EXT)"	 indication	 will	be	displayed	 and	it	is	 impossible	 to	change	 the	
scene file. 
	 	 *	X	indicates	"1"	or	"2".	
2. Light quantity control method selection [ALC/ELC]
The	method	of	controlling	the	quantity	of	light	is	selected	from	the	following	in...

10
Step 2
Move the cursor to "SUPER-D5" and select the item from the following: 
ON (default): Activates the SUPER-D5 function all the time. (+ See below)
ON (i-VMD): Activates the SUPER-D5 function all the time. (+ See below)
    In addition to the SUPER-D5 function, the motion detection function also\
 works. 
OFF: Deactivates the SUPER-D5 function. (+ Page 11)
Note:
	 •	 When	"ON"	or	"ON(i-VMD)"	is	selected	for	"SUPER-D5",	the	following	settings	will	be	restricted....