Panasonic Color CCTV Camera Wv Cp310 Installation Guide

11
Locally procure the screws
Screws are not supplied with this product.
Prepare  the  screws  according  to  the  material, 
structure,  strength  and  other  factors  of  the 
mounting  area  and  the  total  weight  of  objects 
to be mounted.
Screw tightening
 •  The  screws  and  bolts  must  be  tightened 
with  an  appropriate  tightening  torque 
according  to  the  material  and  strength  of 
the installation area.
  •  Do  not  use  an  impact  driver.  Failure  to 
obser ve  this  may  cause...

12
Major operating controls and their functions
1   AC power input terminal [120 V~ 60 Hz]
   
Connect with the supplied power cord.
2  Video output connector [VIDEO OUT]
   Provides video output to system units.
3   Tripod mount base
  This  is  used  to  install  the  camera  onto  the 
mount bracket (Iocally procured).
4  ALC lens connector
  Connects to ALC lens (4-pin).
5  Back focus adjustment screw
  Adjusts  the  back  focus  distance  and image focal length.
6  Power input terminal [12 V  IN, 24...

13
Installation and connection
1 Rotate the lens (option) clockwise slowly to mount the lens.
Important:
  •  CS-mount  lens  can  be  used  on  this  camera.  For  use  of  C-mount  lens,  use  the  C-mount 
adaptor (option).
  •  For  prevention  of  damage  to  the  camera  body,  use  a  lens  with  protrusion  of  5.5  mm  or  less 
from the flange surface. 
Protrusion from mount: 
φ20 mm {25/32 inches} or less
Protrusion from ange: 
5.5 mm {7/32 inches} or less
Optional dedicated lens
Lens type...

14
3 Installation of safety wire
  The following example shows the installation of safety wire:
Important:
  •  Be sure to install safety wire between the camera and the installation position to prevent unex-
pected injury caused by fallen camera.
  •  Ensure that the safety wire is installed. Consult the dealer about installation.
 Attach the safety wire lug (accessory) to the screw hole of the mount 
base with screw (accessory).
1   Loosen  one  screw  in  the  front  portion  of  the 
camera upper...

15
Camera mount
bracket 
(locally procured)
Screws 
(locally procured)  
Screws 
(locally procured)  


4  Installation of camera mount bracket (locally procured)
Secure the camera mount bracket (locally procured) to the installation position, and mount the 
camera on the camera mount bracket. 
Prepare  mounting  screws  according  to  the  material  of  the  area  where  the  camera  mount 
bracket (locally procured) is to be installed. The installation method may be different depending 
on the...

16
5   Mount the camera on the camera mount bracket
Follow  the  instruction  of  camera  mount  bracket  to  mount  the  camera  on  the  camera  mount 
bracket, and aware of the followings:
  • Be  sure  to  install  the  tripod  mount  base  and  safety  wire  before  attaching  the  camera  to  the 
camera mount bracket.
  • Change  the  tripod  mount  base  position  when  attaching  the  camera  to  the  ceiling  mount 
bracket. Observe the following precautions at this time.
    If  it  is  needed...

17
6 Attach safety wire (accessory) to the ceiling or wall.
Attach  the  safety  wire  to  the  foundation  or  other  parts  of  the  building  with  sufficient  strength 
(minimum pull-out strength 196 N {44.06 lbf}).
Prepare  screws  according  to  the  condition  of  the  attachment  position.  Use  the  safety  wire 
(accessory), washer (accessory) and spring washer (accessory).
 
    
Ceiling
Recommended screw M4, 
minimum pull-out strength 
196 N {44.06 lbf} 
Washer (accessory)
Spring washer...

18
7 Connect the video output
Important:
  •  Be sure to turn off the power of each device before connecting.
  •  Be sure to secure the coaxial cable connectors.
    Connect a coaxial cable (locally procured) to the video output connector. 
To video input 
Coaxial cable
120V~60HzVIDEO OUT
h 
Use a cable tie (locally procured) to attach the coaxial cable to the camera 
mount bracket.
Important:
  •  The  cable  tie  shall  be  made  of  metallic  or  durable  material  to  be  strong  enough  because...

19

9 Turn on the power.
    WV-CP300, WV-CP310
    Use the power cord (accessory) to connect the power supply.
Important:
	 •	 The 	 included 	 power 	 cord 	 is 	 the 	 dedicated 	 power 	 cord 	 of 	 this 	 product. 	 Do 	 not 	 use 	 it 	 with 	 other 	
devices.
  WV-CP304, WV-CP314
Important:
	 •	 Use 	 24 	 V 	 AC 	 or 	 12 	 V 	 DC 	 power 	 supply 	 that 	 is 	 insulated 	
from 	 120 	 V 	 AC 	 power. 	
	 •	 The
	 power 	 supply 	 is 	 automatically 	 switchover 	 either 	 24 	 V 	
AC 	 or 	 12...

20

Cable length and wire gauge
24 V AC 
The  recommended  cable  length  and  wire  gauge  are  shown  in  the  table  for  reference.  The  voltage 
supplied to the power terminals of the camera should be within 19.5 V AC\
 and 28 V AC.
The recommended wire size for 24 V AC power cord is shown below:
12 V DC
Calculation of the relation among the cable length, resistance, and power supply.
The voltage supplied to the camera shall be between 10.8 V DC and 16 V D\
C. 
10.8 V DC ≤ V
A - 2 (R x I x L) ≤ 16...