Panasonic Color CCTV Camera Wv Cp310 Installation Guide

21
j Adjust the camera angle by loosening the screw of the camera mount bracket while viewing the video monitor.
    Be sure to loosen the screw of the camera mount bracket when the camera angle is adjusted. 
If the camera angle is changed when the screw is tight, excessive force is applied to the cam-
era mount bracket and camera, and accordingly they may be damaged. Be sure to tighten the 
screw securely after camera angle adjustment.
Adjust the focus.
   To use a fixed-focal lens
    When adjusting...

22
Important:
 •  If  the  view  angle  changes  during  adjustment,  press  the  [SET]  button  to  close  the  "FOCUS 
ADJUSTMENT"  screen  (once  the  view  angle  changes,  the  "PEAK  HOLD"  and  "INDICATOR" 
values will also change), and repeat from step 3  after the view angle is fixed.
  •  When  shooting  in  the  following  place  or  following  subjects,  press  the  [SET]  button  again  to 
close  the  "FOCUS  ADJUSTMENT"  screen.  Adjust  to  the  best  focus...

23

Setup menu

Performing each setting item in the setup menu should be completed in advance to use this unit. Perform 
the settings for each item in accordance with the installation conditions and customer requirements.
List of setup menu

Setup itemDescription
CAMERA ID
This  item  specifies  the  camera  title.  The  camera  title  that  indicates  the 
camera location and other information about the camera is created with 
alphanumeric characters and symbol, and then displayed on the screen.
CAMERA...

24
Screenshot 1
Hold down the [SET] button for about 2 seconds 
to call up the top screen of the setup menu.
 
     MODEL   WV-CP310 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
Screenshot 2
The  setup  mode  changes  to  "ENABLE",  and 
the setup menu becomes ready to be set.
   
 MODEL   WV-CP310 SERIE S
CAMERA ID     OF F
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 END   SETUP ENABL E
    
Step 1
Press  the  [UP]  or  [DOWN]  button  to  move  the 
cursor to...

25

Screenshot 3
The  selected  setup  screen  in  the  setup  menu 
appears on the screen.  
 
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC    
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH
 
D&R(IR)     AUTO1
 VMD        OFF
 RET TOP END

Note:
	 •	 If 	 the 	 top 	 screen 	 of 	 the 	 setup 	 menu 	 is 	
called  up  with  the  operation  buttons 
while  the  camera  is  operated,  the  setup 
mode
	 is 	 always 	 "DISABLE" 	 to 	 prevent 	
operation...

26

Screen transition diagram
CP310
CP310
CP300
Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 

 MODEL   WV-CP310 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI 
    RET TOP END RESET
    ...................

27

Screen transition diagram

CP310
CP310
CP300

Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 

 MODEL   WV-CP300 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI 
    RET TOP END RESET
    ...................

28

Reference page Cause/solution

Troubleshooting

Before	 asking 	 for 	 repairs, 	 confirm 	 the 	 causes 	 with 	 the 	 following 	 table. 	
Contact
	 your 	 dealer 	 if 	 a 	 problem 	 cannot 	 be 	 solved 	 even 	 after 	 checking 	 and 	 trying 	 the 	 solution 	 in 	 the 	
table or a problem is not described below. 
            Symptom

Blurred	 image
The	 temperature 	 of 	 power 	
cord
	 rises 	 or 	 falls 	 when 	 the 	
power cord is bent or 
stretched
	 during 	 use
Damaged	 power 	 cord...

29
Specifications
WV-CP310WV-CP300WV-CP314WV-CP304
Power source 120 V AC 60 Hz 24 V AC 60 Hz, 12 V DC
Power consumption 1.9 W 24 V AC: 2.3 W, 12 V DC: 210 mA
Image sensor 1/3-type interline transfer CCD
Effective pixels 976 (H) × 494 (V)
Scanning area 4.8 mm (H) × 3.6 mm (V) {3/16 inches (H) × 5/32 inches (V)\
}
Scanning system 2:1 interlace
Scanning line 525 lines
Horizontal scanning frequency 15.734 kHz
Vertical scanning frequency 59.94 Hz
Synchronization Internal (INT), multiplexed vertical drive...

30
CD-ROM* ..................................................................... 1 pc.
Installation Guide (this book)  .........................................1 pc.
Warranty card  ............................................................... 1 pc.
* The CD-ROM contains the operating instructions and installation guide (\
PDF).
The following parts are used during installation procedures:
Power cord (only for WV-CP300 and WV-CP310) 
 (Approx. 1.8 m {5.9 feet})  .......................................1...