Panasonic Color Cctv Camera Wv Cp300 Operating Instructions

21
→ The "ZONE NUMBER" screen appears. 
Step 2
Move  the  cursor  to  the  number  at  the  right  of  the  title  and  select  the  zone  number  using  the 
right or left button. 
Step 3
Move the cursor to "POSITION" and press the [SET ] button. 
Step 4
Use  the  [UP],  [dOwN],  [RIghT],  and  [lEfT]  buttons  to  determine  the  left  upper  position  of  the 
zone to be set and press the [SET ] button. 
Step 5
Use the [UP], [dOwN], [RIghT], and [lEfT ] buttons to determine the lower...

22
When "ON" is selected, the zoom factor and the panning/tilting settings \
can be configured. 
Follow the procedure below.
      **EL-ZOOM**
 PUSH SET
      PUSH SET      **EL-ZOOM**
PUSH SET
PUSH SET      **EL-ZOOM**
PUSH SET
PUSH SETZOOM
PAN/TILT ZOOM
PAN/TILT ZOOM
PAN/TILT
 U ZOOM D U ZOOM D
 L PAN R
“SYSTEM SETUP” screen EL-zoom setting screen 
Pan/tilt setting screen
Zoom setting screen
 RET TOP END  RET TOP END RET TOP END
 OFF
    **SYSTEM SETUP** 
SYNC          INT
PRIVACY ZONE...

23
The special menu setup is performed including the setting of the camera image quality and the 
communication  configuration  when  a  decoder  is  used.  The  following  settings  are  to  be  config-
ured  on  the  "SPECIAL  SETUP"  screen  displayed  from  the  top  screen.  Refer  to  page  5-6  for 
how to call up the screen. 
F Chroma level adjustment [CHROMA GAIN] 
Use  the  [RIghT]  or  [LEfT]  button  to  adjust  the  color  density  of  the  camera  image.  When  the 
level indicator...

24
J	Flaw	compensation	[PIX	OFF]	
Flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected. 
Follow the procedure below. 
Step 1
Move the cursor to "PIX OFF" and press the [SET ] button. 
→ The "PIX OFF" screen appears. 
Step 2
Select  a  number  (1  to  16)  with  which  a  pixel  compensation  point  is  registered  and  press  the 
[SET ] button. 
→ The pixel compensation positioning screen appears. 
Step 3
Use the [UP], [DOWN], [RIGHT], and [LEFT]...

25
L Default resetting [CAMERA RESET] 
The settings in the setup menu are restored to the default settings. 
Move  the  cursor  to  "→ PUSH  SET"  of  "CAMERA  RESET"  and  hold  down  the  [SET ]  button  for 
more  than  2  seconds  to  enter  the  next  screen.  To  return  to  the  previous  screen  without  reset-
ting, move the cursor to “NO” and press the [SET ] button. To restore the default settings, move 
the cursor to "YES" and press the [SET ] button. 
Note:
	 •		The...

26
The  language  selection  can  be  made  on  the  "LANGUAGE  SETUP"  screen  displayed  from  the 
top screen. Refer to page 5-6 for how to call up the screen.  
Move  the  cursor  to  “LANGUAGE”,  use  the  [RIGHT]  or  [LEFT]  button  to  select  the  target  lan-
guage, then move the cursor to “SET”, and press the [SET ] button. 
Select the target language from the following. 
JAPANESE/ENGLISH (default)/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO/PУCCKИЙ/ 中文
 
Note:
	 •		When	the	camera	language	is...

27
Use of a system controller with the "Camera function" button allows users to perform the 
shortcut settings with use of the numeric keypad and camera function but\
ton. The available 
shortcut operations with this unit are shown as follows. System controller operation  Setting contents
[9]	+	[0]	+	[Camera	function]		 Black-and-white	control	(BW)	ON
[9]	+	[1]	+	[Camera	function]		 Black-and-white	control	(BW)	OFF
[9]	+	[2]	+	[Camera	function]		 Black-and-white	control	(BW)	AUTO	1...

Panasonic System Communications Company of North America,
Unit of Panasonic Corporation of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A.
Panasonic Canada Inc. 
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca
© Panasonic System Networks Co., Ltd. 2012 
sC0112-0    PGQP1253ZA    Printed in China