Panasonic Color Cctv Camera Wv Cf344 Operating Instructions

21
C Electronic zoom setting [EL-ZOOM] 
Whether or not to use the electronic zoom is determined. 
ON:  Uses the electronic zoom. 
OFF (default):  Does not use the electronic zoom. 
When "ON" is selected, the zoom factor and the panning/tilting settings \
can be configured. 
Follow the procedure below.
Step 1
Move the cursor to "EL-ZOOM", select "ON" and press the [SET ] button. 
→ The "EL-ZOOM" setting screen will be displayed. 
Step 2
Move the cursor to "PUSH SET"...

22
Note:
	 •			Depending	on	the	lens	used,	complete	correction	may	not	be	achieved.	
F Focus setting [FOCUS]  CF354 
Sets the focus adjustment method and fine adjustment method.
Follow the procedure below. 
Important:
	 •	 The	 focus	assist	 function	 is	used	 for	focus	 adjustment	 at	setup.	 This	function	 is	not	 a	func-
tion that is supposed to be operated continuously such as the auto focus\
 function.
	 •	 When	 focus	missing	 occurs	due	to	secular	 change	 in	the	 lens	 and	installation...

23
The special menu setup is performed including the setting of the camera image quality and the 
communication  configuration  when  a  decoder  is  used.  The  following  settings  are  to  be  config-
ured  on  the  "SPECIAL  SETUP"  screen  displayed  from  the  top  screen.  Refer  to  page  5-6  for 
how to call up the screen. 
G Chroma level adjustment [CHROMA GAIN] 
Use  the  [RIghT]  or  [LEfT]  button  to  adjust  the  color  density  of  the  camera  image.  When  the 
level indicator...

24
K Flaw compensation [PIX OFF] 
Flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected. 
Follow the procedure below. 
Step 1
Move the cursor to "PIX OFF" and press the [SET ] button. 
→ The "PIX OFF" screen appears. 
Step 2
Select  a  number  (1  to  16)  with  which  a  pixel  compensation  point  is  registered  and  press  the 
[SET ] button. 
→ The pixel compensation positioning screen appears. 
Step 3
Use  the  [UP],  [DOWN],  [RIGHT],  and...

25
M Default resetting [CAMERA RESET] 
The settings in the setup menu are restored to the default settings. 
Move  the  cursor  to  "→ PUSH  SET"  of  "CAMERA  RESET"  and  hold  down  the  [SET ]  button  for 
more  than  2  seconds  to  enter  the  next  screen.  To  return  to  the  previous  screen  without  reset-
ting, move the cursor to “NO” and press the [SET ] button. To restore the default settings, move 
the cursor to "YES" and press the [SET ] button. 
Note:
	 •		The...

26
The  language  selection  can  be  made  on  the  "LANGUAGE  SETUP"  screen  displayed  from  the 
top screen. Refer to page 5-6 for how to call up the screen.  
Move  the  cursor  to  “LANGUAGE”,  use  the  [RIGHT]  or  [LEFT]  button  to  select  the  target  lan-
guage, then move the cursor to “SET”, and press the [SET ] button. 
Select the target language from the following. 
JAPANESE/ENGLISH (default)/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO/PУCCKИЙ/ 中文 
Note:
	 •		When	the	camera	language	is...

27
Use of a system controller with the "Camera function" button allows users to perform the short-
cut settings with use of the numeric keypad and “Camera function” button. The available short-
cut operations with this product are shown as follows. System controller operation    Setting contents
[9] + [1] + [Camera function]     Black-and-white control (BW) OFF
[9] + [2] + [Camera function]     Black-and-white control (BW) AUTO
[9] + [3] + [Camera function]     Camera title (CAMERA ID) ON 
[9] +...

Panasonic System Communications Company of North America,
Unit of Panasonic Corporation of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A.
Panasonic Canada Inc. 
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca
© Panasonic System Networks Co., Ltd. 2012 
sC0112-0    PGQP1251ZA    Printed in China