Panasonic Coaxial Lan Converter WJ-PR204 WJ-PR201 WJ-PC200 Operating Instructions

1-channel Receiver Side Unit connection example
In this example, the camera is powered by PoE and the receiver side unit is powered
by an AC adaptor.
Ethernet cable (Cat-5e or higher, straight)
Ethernet cable (Cat-5e or higher, straight)
Coaxial cable
Camera
Camera side unit
Receiver side unit
Switching hub
*1 For information about network cameras recommended by Panasonic, visit our web site.
http://security.panasonic.com/pss/security/support/info.html
*2 Use a PoE camera that consumes no more than 6.5...

4.1.2  When using a 4-channel Receiver Side Unit
IMPORTANT•Use RG -6/U coaxial cable with a loop resistance of 4  W/100  m {328  feet} or less.
• When a PoE camera is connected to a 4-channel receiver side unit, make sure the total power consumption is no more than 40 W.
• Only 1 PoE+ camera can be connected.
• When a 4-channel receiver side unit is powered by PoE, use an external power supply to supply power to the camera.
Receiver
side unit power
sourceCamera power
source
Camera
side unit Ethernet...

4-channel Receiver Side Unit connection example
In this example, the camera is powered by PoE and the receiver side unit is powered
by an AC adaptor.
Ethernet cable (Cat-5e or higher, straight)
Ethernet cable (Cat-5e or higher, straight)
Coaxial cable
Camera
Camera side unit
Receiver side unit
Switching hub
IMPORTANT
• A BY-HPE11KTA coaxial LAN converter cannot be connected.
• Use Cat-5e or higher Ethernet cables.
• Use 8-wire (4-pair) Ethernet cables.
• Use an Ethernet cable to connect the camera...

4.2  ConnectionsBefore proceeding with the connections, turn off the power of the unit and other network
devices that will be connected.
Prepare the necessary peripheral equipment and cables.
The ethernet cable and coaxial cable are locally procured.
IMPORTANT
•When using an AC adaptor, make all other connections before finally connecting
the AC adaptor’s plug to the power outlet.
• When using a PoE power supply device, connect the PoE power supply device to the network connector of the receiver side...

2.First pass the coaxial cable through the BNC connector cover (accessory), then
connect the coaxial cable to the BNC connector of the camera side unit.
IMPORTANT
• When connecting the coaxial cable to the unit, make sure that no otherdevices are connected to the coaxial cable. Connecting the coaxial cable to
the unit when there are other devices connected (such as an analog CCTV
camera), may cause damage to the connected device.
• When using existing coaxial cables, disconnect other devices that are...

3.Secure the BNC connector cover using the screw (included parts of camera side
unit) to the camera side unit. 
(Recommended torque 0.6±0.2 N·m {6±2 k gf·cm})
4. First pass the coaxial cable through the included BNC connector cover  (accessory),
then connect the coaxial cable to the BNC connector of the receiver side unit.
• When connecting 2 or more coaxial cables to the 4-channel receiver side unit, remove the BNC connector cover caps  (accessory) and pass the coaxial cables
through the BNC connector...

• Keep the removed BNC connector cover cap (accessory) for future use.
• The illustrations below show an example to establish the 2-channel connectionto a 4-channel unit model. The procedure is the same as for a 1-channel unit
model.
Operating Instructions37
4 Connecting the UnitBNC connector terminal × 4
BNC connector cover cap  
(accessory) BNC connector cover 
(Accessory of receiver side unit)Coaxial cable  

5.Secure the BNC connector cover with included the screw (M2.6  ´ 10 mm 
{3/8 inches}: included parts) to the receiver side unit. 
(Recommended torque 0.6±0.2 N·m {6±0.2 k gf·cm})
6. Connect a ethernet cable  (Cat-5e or higher) to the receiver side unit and network or
PoE power supply device.
38Operating Instructions
4 Connecting the UnitScrew (body diameter  2.6×10 mm {3/8 inches}: 
accessory of receiver  
side unit)
BNC connector cover 
(accessory of receiver side unit) Network connector
Network device...

7.Connect the output connector of the AC adapter (accessory) to the DC jack at the
rear of the receiver side unit, and plug the AC power cord into the power outlet.
• Secure the cables from the AC adapter output connector using the cable fixing hooks at the rear of the receiver side unit.
• Do not place the AC adaptor on top of the receiver side unit.
• When you operate the receiver side unit, the power outlet should be near the receiver side unit and easily accessible. To prevent the AC cord from being...

9.Check the camera shooting screen on the PC, via the coaxial - LAN converter.
• Connect the PC to the system, open Internet Explorer, enter the IP address of the camera, and press the Enter key. The live image of the connected camera
is displayed on the PC screen.
 
Address to enter: “http://192.168.0.10/”
• For the PC settings, see the camera’s Operating Instructions.40Operating Instructions
4 Connecting the Unit