Panasonic Cf30 Service Manual

9-29
9.2.16. Setting the KB Cable Cover, Keyboard and LCD Cable Cover
1. Set the Keyboard onto the Computer.
2. Connect the 2 Cables to the 2 Cables. (CN13,CN14)
3. Fix the KB Cable Cover using the 7 Screws.  No1 to
No7
4. Set the LCD Cable Plate.
5. Fix the LCD Cable Cover using the 3 Screws.  No1 to No3
Note: Tighten the Screws in the numbered order (No1 to No7).
Tighten the Screws in the numbered order (No1 to No3).
Screws : DRQT26+D3FKL
Q  Arranging the Keyboard
 







 to Connector
   (CN14)...

9-30
7.2.17. Setting the KB Cover, Hinge Cover L, Hinge Cover R and Keyboard
1. Insert the front hooks of the Keyboard to the Top Cabinet inorder, and set the Keyboard.
2. Fix the Hinge Cover L and R using the 4 Screws  No1 to No3
3. Fix the Hinge Cover L and R using the 2 Screws.  No1, No2
4. Fix the Bluetooth PCB using the Screw. 
5.  Fix the KB  Co ver using the 4  Screws.    No1 to No4
Note: Tighten the Screws in the numbered order (No1 to No4).
Tighten the Screws in the numbered order (No1 to No3)....

9-31
Q
 Preparation oh HDD ASSY
0   1
0   1
Attach the HDD Tape S
HDD is setAttach the HDD Tape L
7   1
10    1
20    1
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Fit to the corner.
Turn it to the board side (back side).
1    1
Important Parts 
for Safety
Safety Working Attach the Fuse Sheet Back Side
0    2Attach the Heater Fixed Tape 16    2
Insert the HDD FPC Ass’yConnect the Connector
Heater is set
HDD FPC Ass’y
Valley Fold Mountain Fold1. Do not gouge when...

9-32
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2\
HDD Damper Ass’y
Make sure the product with black 
sheet on the yellow sponge.HDD Set Insert after removing the Release Paper of the two-sided tape.Fold the FPC from the board edge.
HDD Ass’y
Remove the Release Paper on 
the back, close and attach it.
Attach it to HDD closely not to loosen. Push and bend
Longer Direction
(15) (10)
HDD Thermal Plate
1    2
1    2
1    2
0    11    21    2
Attach the HDD Cushion...

9-33
(10)
Attach the HDD Cushion (Yellow) Attach the HDD Cushion (Yellow)
Attach the HDD Cushion (Black)
Attach the HDD thermal Plate
1   2
1   21   2
0    1
0    1
1   2
HDD Cushion 
(Black)
* Notes:
HDD Thermal Plate
1. Apply the load when attaching the parts.  20N to 30N (2 to 3Kgf)/cm\
2
Fold back matching 4 corners. Do not bend it at a sharp 
angle to put natural R.
To the level of attaching 
closely in this range
Prepare the metal plate bend When attaching HDD Cushion Plate and HDD Cushion (Black),...

9-34
A-A SECB-B SEC
A
(2)(4)
(4)
11   1
(0)
(20)
HDD Side Damper is installed
HDD Side Damper
B
B
A
0    0.5
HDD Bottom Case Ass’y
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2\
Right and left position: Match to the center
Top and bottom position: Match the edge of the base material transparent\
 
                                         sheet to the bottom sideLower Case
(Entire Circumference) 

9-35
NG
HDD Ass’y insertionSATA Guard is installed
Insert to make the Cushion on the HDD 
inside of the Cushion on the lower case. Avoid getting HDD under the side 
damper when inserting HDD
Set the CN side first, and then set the 
TAB side pushing to the A direction.
A
SATA Guide Set
Tighten of 
Screw   Tighten of 
Screw  Tighten of 
Screw  
Tighten of 
Screw  
Tighten of Screw 
Attach the Edition Number Label
7    2
5    2
Order of fixing
Screw Screw Screw Screw* Notes:
1. Apply the load when attaching...

9-36
9.2.19. Setting the  Battery Pack and HDD Pack
1. Set the HDD Pack.
2. Set the Battery Pack.
Battery
Cover
HDD Cover
HDD Pack
Battery Pack 

C F -30C T Q A Z xx
10 E x plo de d  V ie w
N4
K116
K93
E24
K92K24
K84
N4
K78
N5
K74
K77
K76
N4
K90
K109
E13E21
K1-3
K1-17
K1-1
K1-17
K1-5
K1-6
K1-4
K1-15
K1-4
K1-16
K1-12K1-8
K1-12
K1-2
K1
E17
K1-7
K35
K1-9
N5
N5
N2
K32
K33K35
N5
K2
K1-14
K82
K19
K23
K129
K25
K26
K25
K25
K95
K87
E23
N5
N7N10
N10
K115
E4
N4
N4N4N4
N4
N4
N4
K17
K30
N2
K29K70
K75
K71
K16
N4N4N4
E1001
K73
K73
K73
AAA
B
B
B
BB
A
VV
Screw tightening torque
         0.19 _ 0.02 N.m         (2.0 _ 0.2 kgf.cm)
         0.45 _ 0.05 N.m...

CF-30CTQAZxx
K2-10
K2-10-8
K2-10-8K2-10-2
K2-10-1
K2-10-3
K2-10-1
K2-39
K2-39
K2-10-8 K2-10-4
K2-10-6K2-10-7K2-16K2-4
K2-4-3 K2-4-1
K2-4-2
K2-36
K2-36
K2-43
K2-43
K2-22K2-16
K2-1 K2-1-3
K2-1-2K2-1-1
K2-2-4
K2-2-3
K2-42
K2-42K2-2-1K2-37
K2-2-5
K2
K2-27
K2-44
K2-26K2-41
K112
K104
K101
K100
N4
K122
K2-5-3
K2-16
K2-3
K2-5
K2-5-2
K2-5-1
K2-5-4
K2-16
K2-3-4 K2-3-3 K2-3-1
K2-6-5
K2-6-1 K2-39K2-6-1
N1
K81
K2-8-5 K2-8-4K2-8-10
K2-8-10 K2-8-1 K2-8-1
K2-39 K2-8-8
K2-39
K2-8-7K2-8-9
K2-8
K2-8-11
N4K121
K114
K105...