Home
>
Panasonic
>
Network Hardware
>
Panasonic Central Processing Unit Wj Mpu955 Operating Instructions
Panasonic Central Processing Unit Wj Mpu955 Operating Instructions
Have a look at the manual Panasonic Central Processing Unit Wj Mpu955 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 52
52
Patrol Learn and Play
The following function requires the use of cameras
equipped with this specific feature.
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the [F2]button three times.
LEARN as shown in the figure will appear on the LED
display of the controller.
To save the patrol sequence, follow the procedure
shown below.
qPress the [2]button,...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-51.png "Page 52
52
Patrol Learn and Play
The following function requires the use of cameras
equipped with this specific feature.
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the [F2]button three times.
LEARN as shown in the figure will appear on the LED
display of the controller.
To save the patrol sequence, follow the procedure
shown below.
qPress the [2]button,...")
![Page 53
53
Running Sequence
Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the
Administration Console. As described on the setup, any of
the tours can be assigned to any of the monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence Number by pressing
the numeric buttons.
3. Pressing the [TOUR SEQ]button will run the tour
sequence in forward direction on the active monitor.
The selected Tour...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-52.png "Page 53
53
Running Sequence
Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the
Administration Console. As described on the setup, any of
the tours can be assigned to any of the monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence Number by pressing
the numeric buttons.
3. Pressing the [TOUR SEQ]button will run the tour
sequence in forward direction on the active monitor.
The selected Tour...")
![Page 54
54
On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note:The following functions are not available when the
on-screen displays are compounded from the
Character Board that is installed on the Camera Input
Board. Confirm the setting in the Administration
Console for details.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Pressing the [1]button while holding down the...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-53.png "Page 54
54
On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note:The following functions are not available when the
on-screen displays are compounded from the
Character Board that is installed on the Camera Input
Board. Confirm the setting in the Administration
Console for details.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Pressing the [1]button while holding down the...")
![Page 55
55
5. Pressing the [5]button while holding down the [OSD]
button will toggle the monitor status display on the
active monitor on and off.
6. Pressing the [6]button while holding down the [OSD]
button will toggle the display except clock (time and
date) on the active monitor on and off.
07/07/1999 03:37:21 PM
M AREA1 ALM T R A
C CAMERA TITLE
AUX1 OFFALM S
CAM IDT&D
AUX1 ONVLD S
NEXTPREV
S-CTL ID
STOPPAUSE
CAM MENU ON CAM MENU OFFTOUR
SEQGROUP
SEQ
MONITOR
LOCK
OSD SERVICECAM FUNC...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-54.png "Page 55
55
5. Pressing the [5]button while holding down the [OSD]
button will toggle the monitor status display on the
active monitor on and off.
6. Pressing the [6]button while holding down the [OSD]
button will toggle the display except clock (time and
date) on the active monitor on and off.
07/07/1999 03:37:21 PM
M AREA1 ALM T R A
C CAMERA TITLE
AUX1 OFFALM S
CAM IDT&D
AUX1 ONVLD S
NEXTPREV
S-CTL ID
STOPPAUSE
CAM MENU ON CAM MENU OFFTOUR
SEQGROUP
SEQ
MONITOR
LOCK
OSD SERVICECAM FUNC...")
![Page 56
56
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm inputs, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET button.
Alarm Arming Control
1. Select an alarm number by pressing the numeric but-
tons, followed by the [ALARM]button.
2. Pressing the [ALARM]button repeatedly will arm or...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-55.png "Page 56
56
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm inputs, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET button.
Alarm Arming Control
1. Select an alarm number by pressing the numeric but-
tons, followed by the [ALARM]button.
2. Pressing the [ALARM]button repeatedly will arm or...")
![Page 59
59
System Controller-Related Problems
CU850 controller fails to start.
LCD shows: Connecting to
Main CPU…
SymptomPossible cause / Possible solutionReference page
reference [1]
9
Check the network connection between the CPU unit and
CU850 controller. Check the controller database from the
administration tool and make sure it has the correct boot file
name. Check the controller database and make sure it has
the correct controller Ethernet address.
CU360C controller fails to dis-
play No User while power...](http://img.usermanuals.tech/thumb/58/69467/w64_wj-mpu955_en_om_d-58.png "Page 59
59
System Controller-Related Problems
CU850 controller fails to start.
LCD shows: Connecting to
Main CPU…
SymptomPossible cause / Possible solutionReference page
reference [1]
9
Check the network connection between the CPU unit and
CU850 controller. Check the controller database from the
administration tool and make sure it has the correct boot file
name. Check the controller database and make sure it has
the correct controller Ethernet address.
CU360C controller fails to dis-
play No User while power...")
PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809)750-4300Panasonic Digital Communications & Security Company Unit of Matsushita Electric Corporation of America Security Systems Group www.panasonic.com/cctv Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Zone Office Eastern:One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Central:1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205 Western:6550 Katella Ave., Cypress, CA 90630 (714) 373-7840 2003 © Matsushita Electric Industrial Co., Ltd. All rights reserved. N1203-1024 3TR002170BAA Printed in Japan