Home > Panasonic > Stereo System > Panasonic Cd Stereo System Sc-max670 Owners Manual

Panasonic Cd Stereo System Sc-max670 Owners Manual

Here you can view all the pages of manual Panasonic Cd Stereo System Sc-max670 Owners Manual. The Panasonic manuals for Stereo System are available online for free. You can easily download all the documents as PDF.

Page 11

11VQT5F35ENGLISH
You can change the transmission speed to prioritize 
transmission quality or sound quality.
Preparation
If this system is connected to a Bluetooth
® device, 
disconnect it ( >“Disconnecting a device”).
1
Press [PLAY MENU] to select “LINK MODE”.
2
Press [ 2,1] to select “MODE 1” or “MODE 2” 
and then press [OK].
Note:
The default setting is “MODE 2”.1
Press [PLAY MENU] repeatedly to select 
“DISCONNECT?”.
2
Press [ 2,1] to select “OK? YES” and then 
press [OK].
Note:
A device is...

Page 12

VQT5F35
12
The sleep timer switches off the system after the set 
time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
Note:• The sleep timer always comes first. Be sure not to set an overlap of timers.
Sound and illuminationYou can adjust the sound effect.1
Press [SOUND] to select the sound effect.
2
Press [ 2,1] to select the desired setting.
Preset EQ
Press [PRESET EQ] to select desired preset.
Using the main unit
You can adjust certain sound effect using the controls on...

Page 13

13VQT5F35ENGLISH
DJ functionsDJ functions has the following functions
- DJ jukebox
- DJ sampler
- DJ effects
Using these functions, you can add various effects to the 
track you are playing back., 
This mode adds a crossfade effect or sample sound mix 
to the intervals between the tracks you play back.
This function works when you play back the tracks in the 
USB device.1
Press [DJ JUKEBOX] on main unit.
• The setting of the unit switches to repeat mode  automatically.
• (In the stop mode only) You can...

Page 14

VQT5F35
14
Using a microphonePreparation
Decrease the volume of the system to its minimum 
before you connect or disconnect a microphone.1
Connect a microphone (not supplied) to the 
microphone jack.
Plug type: ‰ 6.3 mm (1/4 z) monaural
2
Turn [MIC VOL, MIN/MAX] on the main unit to 
adjust the volume of the microphone.
3
If you want to sing with the background music.
Play the music source and adjust the volume of 
the system.
Note:
• If a strange noise (howling) is emitted, move the  microphone away from...

Page 15

15VQT5F35ENGLISH
TroubleshootingBefore requesting service, make the following checks.
If you are in doubt about some of the check points, or if 
the solutions indicated do not solve the problem, consult 
your dealer for instructions.
The unit does not work.
• One of the unit’s safety devices may have been activated.
Reset the unit as follows:
1 Press [ Í/I] on the main unit to switch the unit to 
standby.
• If the unit does not switch to standby, press [ Í/I] 
on the main unit for a few seconds. The unit...

Page 16

VQT5F35
16
“USB A NO DEVICE”
“USB B NO DEVICE”
• The USB device is not connected. Examine the connection.
“ERROR”
• An incorrect operation was done. Read the instructions  and try again.
“F61”
• Examine and correct the speaker cords connection.
• Disconnect the USB device. Switch off the system and  then switch it on again.
“F70”
• Examine the Bluetooth
® device.
• Disconnect the Bluetooth® device. Switch off the 
system and then switch it on again.
“F77”
• Switch off the system and then switch it on...

Page 17

17VQT5F35ENGLISH
ReferenceOccasionally, Panasonic may release updated software 
for this unit that may add or improve the way a feature 
operates. These updates are available free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Frequency band
• This system uses the 2.4 GHz frequency band.
Certification
• This system conforms to the frequency restrictions and has received certification based on frequency laws. 
Thus, a...

Page 18

VQT5F35
18
SpecificationsRMS output power (each channel driven)High 400+400 W  (3™, 1 kHz, 30% THD)
Mid-Low 400+400 W (3™, 1 kHz, 30% THD)
Low 850+850 W (5™, 100 Hz, 30% THD)
Total RMS output power  3300 W (30% THD)
FTC Output Power High 200+200 W  (2 kHz to 20 kHz, 1%, 3™)
Mid-Low 200+200 W  (80Hzto4kHz,1%,3™)
Low 200+200 W (50Hzto170Hz,1%,5™)
Disc played  8cm (3 z) CD, CD-R/RW
12 cm (5 z) CD, CD-R/RW
Pick up Wavelength 790 nm  (CD)
Laser power CLASS I
Audio output (disc) 2ch (FL, FR)
FL = Front left...

Page 19

19VQT5F35ENGLISH
Limited WarrantyPanasonic Products Limited 
WarrantyLimited Warranty Coverage
(For USA Only)If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Corporation of North America (referred to as “the 
warrantor”) will, for the length of the period indicated on the chart below, 
which starts with the date of original purchase (“warranty period”), at its 
option either (a) repair your product with new or refurbished parts, (b) 
replace it with a new...

Page 20

VQT5F35
20
Cómo realizar las conexiones
1
Conecte los altavoces.
Conecte los cables de los altavoces a los terminales 
del mismo color.
2
Conecte la antena interior de FM.
Coloque la antena donde la recepción sea mejor.
3
Conecte el cable de alimentación de CA.
Utilice solamente el adaptador de CA suministrado.
Disco
1
Pulse [ OPEN/CLOSE] en la unidad principal 
para abrir la bandeja del disco.
Coloque un disco con la etiqueta hacia arriba.
Pulse [ OPEN/CLOSE] nuevamente para cerrar la 
bandeja del...
Start reading Panasonic Cd Stereo System Sc-max670 Owners Manual

Related Manuals for Panasonic Cd Stereo System Sc-max670 Owners Manual

All Panasonic manuals