Panasonic Cd Player Weather Band Receiver Cq 5101u Operating Instructions

CQ-5101U11
Radio
Radio Mode
Press [MODE]to change to the radio mode.
Band
Press [BAND]to change the band.
Seek Tuning
Hold down for more than 0.5 seconds and release it.
[}TUNE]: Higher frequency
[{TUNE]: Lower frequency
T uning will automatically stop when the next broadcast
station is received. FM stereo indicator, lights while receiving an FM stereo signal.
w
Manual Tuning
[}TUNE]: Higher frequency
[{TUNE]: Lower frequency
e
( When a CD disc is loaded.)
Radio
aCD PlayeraAUX Mode
c
FM1FM2
AM162...

CQ-5101U12
Radio (Continued)
Preset buttons from [1]to [6]
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2
and AM preset station memories.
Note:Existing saved stations are overwritten with new
stations after following this procedure.
blinks once
Band
Press [BAND](APM)to select a desired band. 
(
➡page 11)
Auto Preset Memory (APM)
Hold down [BAND](APM: auto preset memory) for more than
2 seconds.
•  The 6 stations with good reception will be automatically
saved in the memory...

CQ-5101U13
Tuning in a Weather Band Station
• Press [BAND](APM)to select WB (Weather Band). (apage 11)
• Press any of the buttons 
[1]to [6]to monitor the preset station.
Weather Band Stations
National Weather Radio Broadcasts from over 380 Iocations throughout the
U.S. on seven VHF/FM frequencies.
T une to weather band to receive continuous weather information 24 hours
a day on one of the following frequencies.
1. 162.550 MHz
2. 162.400 MHz
3. 162.475 MHz
4. 162.425 MHz
5. 162.450 MHz
6. 162.500 MHz
7....

CQ-5101U14
CD Player
Disc Insert and Playback
Disc insert
Playback will start automatically after the player recognized
the loaded disc as an ordinary music CD. (When a CD-R or
CD-RW which has CD-DA* formatted data as the same as an
ordinary music CD is loaded, this player recognizes it as an
ordinary music CD.)
*CD-DA: A general music CD format.
“LOAd” will be displayed until the disc is loaded.
Notes:
•Do not insert a disc when “DISC” indicator lights.
• The power will be turned on automatically when a...

CQ-5101U15
Track Search
Hold down...
[dTUNE]: Fast forward
[sTUNE]: Fast reverse
Release to resume the regular play.
Pause
• Press [BAND] (h/5).
• Press again to cancel.
Track Selection
Press [dTUNE]: Advance to the next track.
Press 
[sTUNE]: Back to the beginning of the current track.
Back to the previous track. (Press
twice.)
Repeat play
• Press [5] (REPEAT).
The current track is repeated.
• Press 
[5] (REPEAT)again to cancel.
Random play
• Press [6] (RANDOM).
All the tracks are played in random...

CQ-5101U16
AUX (Auxiliary Input Mode)
Connecting with the portable audio player
The AUX input terminal is equipped on the front panel. This jack is used\
 to connect a portable audio device using a
standard mini-plug cable. By connecting a commercially available portable audio device, this unit can play the music
recorded on the device.
The AUX Input Example:
Front AUX IN
(3.5 mm ø stereo)3.5 mm ø stereo mini-plug cable (Option) Stereo line out
(3.5 mm ø)
Silicon audio player,
HDD audio player etc....

CQ-5101U17
Listening to the portable audio device
qTurn on the connected portable audio device and play the music.
wPress [MODE](POWER) to change to AUX mode. The sound of the portable audio device \
is output through the
speakers.
Display change
Press [DISP]to change the display.
AUX input mode (default)
Clock display
RadioCD playerAUX Mode
( When a CD disc is loaded.)
“AU In” will be displayed when
switch to the AUX mode.
Notes:
• 
If you disconnect the mini-plug cable and connect it again in AUX mode,...

CQ-5101U18
Troubleshooting 
No power.
Tr ouble
Vehicle’s ignition switch is not on.
aTu rn your vehicle’s ignition switch to ACC or ON.
Cables are not correctly connected.
aConnect cables correctly.
Power connector is not correctly connected.
aConnect the power connector to the terminal that is always active.
Power connector is not correctly connected. 
aConnect the power connector to your vehicle’s ACC source.
Grounding wire is not correctly connected. 
aConnect the grounding wire to a metal part of the...

CQ-5101U19
Sound skips due to 
vibration.
Mounting angle is over 30˚.
aAdjust mounting angle to less than 30˚.
Instable mounting.
aMount the unit securely with the mounting parts, referring to the
section on installation.
Much noise in FM stereo
and monaural broad-
casts.
Trouble
Station is too far, or signals are too weak.
aSelect other stations of higher signal level.
The radio antenna is not extended enough.
aExtend fully the radio antenna.
Preset station is reset.Battery cable is not correctly...

CQ-5101U20
No sound from left, right,
front, or rear speaker.
Trouble
Left and right balance, or front and rear balance is off on one side.
aAdjust BAL/FAD as appropriate.
Left and right sounds are
reversed in stereo
listening.The right speaker wire is connected to the left speaker and the left spe\
aker
wire to the right speaker.
aConnect the speaker wires to the correct ones.
Cables are not correctly connected.
aConnect the cables correctly.
Check point
❐Sound Setting
Disc is not ejected.
Ti me is...