Home
>
Panasonic
>
CD Player
>
Panasonic Cd Player Weather Band Receiver Cq 5101u Operating Instructions
Panasonic Cd Player Weather Band Receiver Cq 5101u Operating Instructions
Here you can view all the pages of manual Panasonic Cd Player Weather Band Receiver Cq 5101u Operating Instructions. The Panasonic manuals for CD Player are available online for free. You can easily download all the documents as PDF.
Page 21
CQ-5101U21 Care of the Unit Notes on Discs Notes on CD-R/RW ❐Cleaning this Unit Use a dry, soft cloth to wipe. ❐Caution on Cleaning Never use solvents such as benzine, thinner as they may mar the surface of the unit. Do not play any ordinary music CDs with labels other than this one. • You may have trouble playing back some CD-R/RW discs recorded on CD recor\ ders (CD-R/RW drives), either due totheir recording characteristics or dirt, fingerprints, scratches, etc. o\ n the disc surface. • CD-R/RW discs...
Page 22
CQ-5101U22 Speaker Connections L R - - - - - - - - - - + + + + ++ + + + +- + - + - +- +- + - +- +- + L R L R L R (White) (White w/black stripe) Chassis (Gray w/black stripe) (Gray) Chassis • Use ungrounded speaker only. • The maximum speaker input should be 37 W or more. (If used with the op\ tional power amplifier, the speaker input should be higher than the maximum amplifier output.) • The speaker impedance should be 4 - 8 Ω . • This unit uses the BTCL circuit, so each speaker should be...
Page 23
CQ-5101U23 Installation Guide ❐Overview This product should be installed by a professional. However, should you decide to install the product against the manufacturer’s recommendation, these operating Instructions do not contain electrical installation instructions. You must contact your car dealer or manufacturer for electrical connection instructions to avoid possible damage to your electrical safety systems and resulting injury or death. (Please refer to the “WARNING” statement above). Y our next step...
Page 24
CQ-5101U24 Installation Guide (Continued) ❐Preparation❐Installation Hardware • Disconnect the cable from the negative @battery terminal (see warning and caution below). • Remove Mounting Collar qfrom the main unit temporarily, which are already mounted at shipment.* • Unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. ❐Dashboard Installation Installation Opening This unit can be installed in any dashboard having an opening as shown...
Page 25
CQ-5101U25 1 2 3 First complete the electrical connections, and then check them for corre\ ctness.(apage 27) The included Mounting Collar qis designed specially for this unit. Do not use it to attach any other m\ odel. Insert Mounting Collar qinto the dashboard, and bend the mounting tabs out with a screwdriver. Establish the rear connection of the unit. After fixing Power Connector, fix the rear of the unit to the vehicle body by either method (a) or (b) shown in the previous page. After...
Page 26
CQ-5101U26 To Remove the Unit from the vehicles dashboard Insert each Removal Tool iand pull. Note:Do not lose Removal Tools. They will be needed to remove the unit from the vehicles dashboar\ d. iRemoval Tool (U-shaped) Installation Guide (Continued) $26RYE .
Page 27
CQ-5101U27 Electrical Connections ❐Wiring Diagram Accessory Power(ACC) (+12 V DC, negative @ ground only) Ground Lead (Connect to a clean, bare metallic part of your vehicle) Battery Lead (Connect to vehicle battery) (Red) ACC Ground (Black) (Yellow) Battery (Violet) (Violet/Black) (Gray/Black) (Green) (Green/Black) (White/Black) (Gray) (white) Left Speaker (Front) Right Speaker (Front) Left Speaker (Rear) Right Speaker (Rear) Power Connector The power connector does not come along with the unit. If...
Page 28
CQ-5101U28 Specifications ❐General Power Supply:12 V DC (11 V-16 V) test Voltage 14.4 V, Negative @ground Current consumption: Less than 2.5 A (CD mode, 0.5 W 4-speaker) Maximum Power Output: 37 W ×4 channels at 400 Hz, Volume Control maximum T one adjustment range: Bass: ± 12 dB at 100 Hz Tr eble: ± 12 dB at 10 kHz Power Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD Suitable Speaker Impedance: 4-8 Ω Dimensions (W H D): 178(W) 50(H) 160(D) mm {7 1-15/16 6-19/64} W eight: 1.4 k g{3.08...