Panasonic Cd Player Receiver Cq Dfx301 Operating Instructions

VOL
SEL
SUB·W
OPEN
SOURCE
PTYPWRMONO/LOC
TA TUNE
TRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301N
EONEPTYECTCTREPEATSCAN RANDOMREGDISPAF123 4R
SCAN REP5612SCAN REP5634R
BAND
wAuto Station Preset
(AUTO•P)
Press and hold [BAND](AUTO•P)for more than 2
seconds (Auto Preset Memory).
¡The 6 strongest available stations will be auto-
matically saved in the memory under preset but-
tons [1]to [6].
¡Once set, the preset stations are sequentially
scanned for 5 seconds each.
Manual...

VOL
SEL
SUB·W
OPEN
SOURCE
PTYPWRMONO/LOC
TA TUNE
TRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301N
EONEPTYECTCTREPEATSCAN RANDOMREGDISPAF123 4R
SCAN REP56DISPAF12SCAN REP5634R
12CQ-DFX301N
7
E
N
G
L
I
S
HRDS (Radio Data System)
RDS Basics
The following functions are available when receiving RDS stations.
PS Display
(Program Service name)
The name of station is displayed
instead of the frequency.
CT Service
(Clock Time)
When receiving an RDS station, the
CT (Clock Time) service...

VOL
SEL
SUB·W
OPEN
SOURCE
PTYPWRMONO/LOC
TA TUNE
TRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301N
EONEPTYECTCTREPEATSCAN RANDOMREGDISPAF123 4R
SCAN REP56
VOL
TA
Traffic Announcements
Some RDS FM stations periodically
provide traffic information.TP
(Traffic Program identification)
Broadcasting of traffic information
TA
(Traffic Announcements identification)
Radio announcements on traffic condi-
tions
TA Volume Set
(Volume Level :  0 to 40)
Press [}VOL]or [{VOL]while receiving...

VOL
SEL
SUB·W
OPEN
SOURCE
PTYPWRMONO/LOC
TA TUNE
TRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301N
EONEPTYECTCTREPEATSCAN RANDOMREGDISPAF123 4R
SCAN REP56
TUNETRACK
DISP12SCAN REP5634R
BANDPTY
RDS (Radio Data System)(continued)
PTY Reception (Program Type)
RDS FM stations provide a program type identification signal.
Example: news, rock, classical music, etc.
PTY Mode
Press [PTY]to switch PTY display mode on
or off.
PTY
PTY
PTY Selection
q
Press [[TUNE]to change the program...

VOL
SELTUNETRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301
CTSCA RANDOMDISP123 4R
S5
TUNETRACK
DISP
BAND
PTY Type Preset
Program types are stored in memory under preset buttons
[1]to [6]as shown in the table below.
To tune in the desired program type, press any of preset but-
tons [1]to [6].
EON (Enhanced Other Networks)
When EON data is received, the EON indicator lights and the
TA and AF functions are expanded as follows.
TA :Traffic information from the current and other...

Track Selection
[fTRACK] :Advance to the next track.
[aTRACK] :Back to beginning of the
current track.
Back to previous track.
(Press twice)
Track Search
Press and hold
[fTRACK] :Fast forward
[aTRACK] :Fast backward
Release to resume the
regular CD or CD 
changer play.
Listening to a CD
Mode Selection
Press [SOURCE]to select the 
CD or CD changer mode.
CD Player and CD Changer
16CQ-DFX301N
11
E
N
G
L
I
S
H
Caution:Only 12cm CDis available for this unit.
ONLY USE DISCS CARRYING THE LABEL
SHOWN ON THE...

VOL
SEL
SUB·W
OPEN
SOURCE
PTYPWRMONO/LOC
TA TUNE
TRACK
BAND
LOUDDISC 
AUTO·PREMOTE
CD RECEIVER WITH CHANGER CONTROL
CQ-DFX301N
EONEPTYECTCTREPEATSCAN RANDOMREGDISPAF123 4R
SCAN REP56
SOURCETUNETRACK
DISP12SCAN REP564R
Display Change
Press [DISP]to switch to the
clock display.
Press again to cancel.
Disc Selection (Only for CD Changer)
[1]({DISC):  Previous disc.
[2](}DISC):  Next disc. Track Number

Random Scan RepeatPlaying Time
17CQ-DFX301N
12
E
N
G
L
I
S
H
Disc Indicator

Track
NumberPlaying Time...

Caution:Do not disconnect the battery terminals of a car
with trip or navigational computer since all user settings
stored in memory will be lost.  Instead take extra care with
installing the unit to prevent shorts.
Installation
Preparation
18CQ-DFX301N
13
E
N
G
L
I
S
H
¡Before installation, check the radio operation with antenna and
speakers.
¡Disconnect the cable from the negative (–) battery terminal
(see caution below).
¡Unit should be installed in a horizontal position with the front
end up at a...

Q’tyDiagramItemNo.
1
2
3
4
Supplied Hardware
Fire Wall of Car
Hex. Nut (Option)
Rear Support Strap (Option)
wMounting Bolt
qMounting Collar
Tapping Screw (Option)3 mmø
(a) Using the Rear Support Strap (Option)
Rubber Cushion 
(Option)
wMounting Bolt
qMounting Collar
Rear Support Bracket
(Provided on the car)
(b) Using the Rubber Cushion (Option)
Make sure that the lock lever (C)
is flush with the mounting collar
(not projecting outward).
Lock Lever
Mounting Tabs
Mounting Bolt w
Secure the rear of the...

20CQ-DFX301N
15
E
N
G
L
I
S
H
To Remove the Unit
q
Remove the removable face plate.
(a) Open the face plate.
(b) Push the face plate to either the right or left,
then pull it out toward you.
wRemove the trim plate twith a screwdriver.
ePull out the unit while pushing down the lock
lever with a screwdriver.
rRemove the unit pulling with both hands.
Installation (continued)
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If...