Home
>
Panasonic
>
Cassette Player
>
Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions
Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions
Here you can view all the pages of manual Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions . The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 21
CQ-4330U21 Speaker Connections Caution:Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers. L R - - - - - - - - - - + + ++ ++ + ++ +- + - + - +- +- + - +- +- + L R L R L R (White) (White w/black stripe) Chassis (Gray w/black stripe)(Gray) Chassis • Use ungrounded speaker only. • The maximum speaker input should be 37 W or more. (If used with the optional power amplifier, the speaker input should be higher than the maximum amplifier output.) •...
Page 22
CQ-4330U22 Installation Guide ❐This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a vehicle by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury or death. ❐If your vehicle is equipped with air bag and/or...
Page 23
CQ-4330U23 ❐Preparation❐Installation Hardware Warning:If your vehicle is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection of the battery to install this product. Before attempting installation of this electronic component, contact your vehicle dealer or manufacturer to determine the required procedure and strictly follow their instructions. FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR...
Page 24
CQ-4330U24 Installation (Continued) Cautions: • We strongly recommend that you wear gloves for installation work to protect yourself from injuries. • When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. 1 2 3 First complete the electrical connections, and then check them for correctness.(apage 26) The included Mounting Collar qis designed specially for this unit. Do not use it to attach any other model. Insert Mounting Collar qinto...
Page 25
CQ-4330U25 To Remove the Unit from the vehicles dashboard Insert each Removal Tool iand pull. Note:Do not lose Removal Tools. They will be needed to remove the unit from the vehicles dashboard. iRemoval Tool (U-shaped)
Page 26
CQ-4330U26 Electrical Connections Cautions: • This wiring information is for experienced technical individual, for safety reason, please your dealer wire this connection. • This product is designed to operate with a 12 V DC, negative ground battery system. • To prevent damage to the unit, be sure to follow the connection diagram below. • Do not insert the power connector into the unit until the wiring is completed. • Be sure to insulate any exposed wires from a possible short-circuit from the vehicle...
Page 27
CQ-4330U27 Electrical Connections (Continued) Extension Cable for connecting the unit and the XM receiver. OThe Extension cable does not come along with the unit, if need, please consult your dealer. XM ANT XM RECEIVER (XM-RVR-D-001) antenna RCA (Red) R 8P DIN (Male) RCA (White) L contoroller/ head unitR FM out audio outR L power XM control connector (10P connector) CQ-4330U XM control connector (2P connector) Note: For wiring, carefully read the operation instructions for the devices connected....
Page 28
CQ-4330U28 Electrical Connections CQ-4330U CD changer connector (10P connector) CD Changer (CD-DP880, option) Extension Cable for connecting the unit and CD changer. OThe Extension cable does not come along with the unit, if need, please consult your dealer.XM control connector (2P connector) Note: For wiring, carefully read the operation instructions for the devices connected. ❐Upgrading the system ( connect a CD changer )
Page 29
CQ-4330U29 Specifications ❐General Power Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground Current consumption: Less than 2.5 A (tape mode, 0.5 W 4-speaker) Maximum Power Output: 37 W ×4 channels at 400 Hz, Volume Control maximum Tone adjustment range: Bass: ± 12 dB at 100 Hz Treble: ± 12 dB at 10 kHz Power Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD Suitable Speaker Impedance: 4-8 Ω Dimensions (W ×H ×D): 7 ×1-15/16 ×6-1/10 (178 ×50 ×160 mm) Weight: 3 lbs. 12 oz...
Page 30
YFM284C419ZA TAMACO0304-0 Printed in Taiwan Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094