Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions

CQ-4330U11
LOUDVOL
SEL/SATPUSH
BASS/TREB
BAL/FADER
MUTE
SCANTUNE
SEEK
ILL6 5 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDM
CQ-4330U
CLK
ALMAPM DISP
BAND MODE PWR
6 5 SKP4 REP3 TPS2 NR1 MTL
Tuning in a Weather Band Station
• Press [BAND]to select WB (Weather Band). (apage 9)
• Press any of the buttons 
[1]to [6]to monitor the preset station.
Weather Band Stations
National Weather Radio Broadcasts from over 380 Iocations throughout the
U.S. on seven VHF/FM frequencies.
Tune to weather band to receive...

CQ-4330U12
Cassette Tape Player
LOUDOL
SEL/SATUSH
ASS/TREB
L/FADER
MUTE
SCAN
ILL6 5 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDM
CQ-4330U
DISP
MODE
Exposed Tape side
Loading a Cassette 
Insert the cassette with the exposed tape side facing
to the right. Gently push the cassette in until the
loading begins. The cassette will be loaded in place
and playback starts.
Ejecting the Tape
Press [u]and the cassette will eject for removal, and the
previous mode of operation will be resumed.
Notes:
• If power is...

LOUDVOL
SEL/SATPUSH
BASS/TREB
BAL/FADER
MUTE
SCANTUNE
SEEK
ILL6 5 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDM
CQ-4330U
CLK
ALMAPM DISP
BAND MODE PWR
TUNE
SEEK
6 5 SKP4 REP3 TPS2 NR1 MTL
CQ-4330U13
Metal Tape Mode
Press [1] (MTL)when playing metal or chromium
dioxide (CrO2) tapes.
Press 
[1] (MTL)again to cancel.
Note:Playing normal tapes in metal tape mode
causes high frequency imbalance, which affects
tone quality.
Blank Skip
Press [5] (SKP)to skip unrecorded portions
longer than 15 seconds on the tape....

LOUDVOL
SEL/SATPUSH
BASS/TREB
BAL/FADER
MUTE
SCANTUNE
SEEK
ILL6 5 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDM
CQ-4330U
CLK
ALMAPM DISP
BAND MODE PWRMODE
2 NR1 MTL
TUNE
SEEK
CQ-4330U14
CD Changer Control
CD Changer mode
While a disc magazine is inserted in
the CD changer, press 
[MODE]to
select CD changer mode. 
Play starts from the first track.
q
Disc Selection
[1] ({DISC):Previous disc.
[2] (}DISC):Next disc.
w
Track Selection
Press [TRACK 2]once to go to the next track. Press
repeatedly to step forward...

CQ-4330U15
Error Display Messages
Disc is dirty, or is upside down.
➡Select the next available compact disc. Check the disc.
Disc has scratches.
➡Select the next available compact disc. Check the disc.
No operation by some cause.
➡Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored yet, call the store where you
purchased the unit or the nearest panasonic service center to ask for
repairs.
No disc in the changer (magazine)
➡Insert discs...

CQ-4330U16
XM Control
Preparation:
Connect the XM receiver (XM DIRECT MODEL:XM-RVR-D-OO1) to the Unit  CQ-4330U.
XM satellite radio is available on a chargable basis.
LOUDVOL
SEL/SATPUSH
BASS/TREB
BAL/FADER
MUTE
SCANTUNE
SEEK
ILL6 5 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDM
CQ-4330U
CLK
ALMAPM DISP
BAND MODE PWR
qXM Mode
(When a XM receiver is connected.)
Press 
[MODE]to change to the XM mode.
wBand
Press [BAND].
eChannel Selection
Press [}]: Up
Press 
[{]: Down
Press and hold 
[}]or [{]for more than 2...

BAND
Notes:
CAT OFF: Every channel can be selected from  every category.
CAT ON: Only channels in the current category can be selected.
Default: CAT OFF
Manual Preset Memory
Up to 6 channels each can be saved in the XM1, XM2 and XM3 preset  station memories.
qSelect a band and a channel.
Note:
Existing saved channels are overwritten with new channels after the above procedure.• The channel number and the preset number blink once.
Preset memory Calling
qSelect a band.wPress [1]to [6]. Push and hold the...

CQ-4330U18
Display Change
Press and hold [MODE](DISP) for more than 2 seconds.
XM ID Confirmation
• Push and hold the knob [SEL]for more than 2 seconds and then push again during 2 seconds.
MODE
(Press and hold)Channel name
(Reading artist name)
(Reading song title)
Note:
Display when there is no name/title or can not decode.
(Push and hold) (Push)
Note:
If the ID number is 12345678 for example.
• Push the knob for more than 2 seconds to resume to the previous mode when displaying “RADIO ID” or ID...

CQ-4330U19
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit by yourself because it
is dangerous to do so.
No power.
Trouble
Vehicle’s ignition switch is not on.
aTurn your vehicle’s ignition switch to ACC or ON.
Cables are not correctly connected.
aConnect cables...

CQ-4330U20
Much noise in FM stereo
and monaural broad-
casts.
Trouble
The antenna ground lead is not connected properly.
aConnect the antenna ground lead properly.
The radio antenna is not extended enough.
aExtend fully the radio antenna.
Preset station is reset.Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always active.
Cause/Step
❐Radio
No sound.
Trouble
Blank tape is inserted in the unit.
aInsert recorded tape into the unit.
Tape sound quality is
poor....