Home > Panasonic > Cassette Player > Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions

Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							CQ-4330U21
    Speaker Connections
    Caution:Please follow the instructions given below.  Failure to do so will cause damage to the unit and speakers.
    L
    R
    - 
    - 
    - - 
    - - 
    - - 
    - 
    - +
    +
    ++
    ++
    +
    ++ +- +
    - +
    - +- +- +
    - +- +- +
    L
    R
    L
    R
    L
    R
    
    
    (White)
    (White
    w/black stripe)
    Chassis
    (Gray 
    w/black stripe)(Gray)
    Chassis
    • Use ungrounded speaker only.
    • The maximum speaker input should be 37 W or more.  (If used with the optional
    power amplifier, the speaker input should be higher than the maximum amplifier
    output.)
    • The speaker impedance should be 4 - 8 Ω.
    • This unit uses the BTCL circuit, so each speaker should be connected separately
    using parallel vinyl insulated cords.
    • The speaker cords and the power amplifier unit should be kept away (about 30 cm
    apart) from the antenna and antenna extension cord.
    • Never connect the speaker cord to
    the body of the car.• Do not use a 3-wire type speaker
    system having a common earth
    lead.• Do not connect more than one
    speaker to one set of speaker
    leads.
    Product Servicing
    If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
    Panasonic Servicenter. The product should be serviced only by a qualified technician.
    Maintenance
    Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
    exterior cleaning. Never use benzine, thinner, or other solvents.
    Caution
    This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use
    fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start
    smoking, ignite or other malfunction.
    If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A
    or a circuit breaker at the BATTERY lead of your vehicles harness. please see page 26 to find out where BATTERY +
    12 V is for your dealer adding the fuse or the circuit breaker. 
    						
    							CQ-4330U22
    Installation Guide
    ❐This installation information is designed for experienced installers and is not
    intended for non-technical individuals. It does not contain warnings or cautions of
    potential dangers involved in attempting to install this product.
    Any attempt to install this product in a vehicle by anyone other than a qualified
    installer could cause damage to the electrical system and could result in serious
    personal injury or death.
    ❐If your vehicle is equipped with air bag and/or anti-theft systems, specific procedures
    may be required for connection and disconnection of the battery to install this product.
    Before attempting installation of this electronic component, contact your vehicle
    dealer or manufacturer to determine the required procedure and strictly follow their
    instructions.
    FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOY-
    MENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN
    DAMAGE TO THE VEHICLE AND PERSONAL INJURY.
    WARNING
    ❐Overview
    This product should be installed by a professional.
    However, if you plan to install this product yourself,
    your first step is to decide where to install it. The
    instructions in these pages will guide you through the
    remaining steps: 
    (Please refer to the “WARNING” statement above.)
    • Identify and label the car wires.
    • Connect the car wires to the wires of the power
    connector.
    • Install the unit in the dashboard.
    • Check the operation of the unit.
    If you encounter problems, please consult your nearest
    professional installer.
    Caution:This unit operates with a 12 V DC negative
    ground auto battery system only. Do not attempt to
    use it in any other system. Doing so could cause
    serious damage.
    Before you begin installation, look for the items which
    are packed with your unit.
    • 
    Warranty Card…Fill this out promptly.
    • 
    Panasonic Servicenter List for Service Directory
    …Keep for future reference in case the product needs
    servicing.
    • 
    Installation Hardware…Needed for in-dash installation.
    ❐Dashboard Specifications
    Min. 3⁄16 (4.75 mm)
    Max. 7⁄32 (5.56 mm)
    23⁄32 (53 mm)
    75⁄32 (182 mm) Thickness 
    						
    							CQ-4330U23
    ❐Preparation❐Installation Hardware
    Warning:If your vehicle is equipped with air bag
    and/or anti-theft systems, specific procedures may
    be required for connection and disconnection of the
    battery to install this product.
    Before attempting installation of this electronic
    component, contact your vehicle dealer or
    manufacturer to determine the required procedure
    and strictly follow their instructions. 
    FAILURE TO FOLLOW THE PROCEDURE MAY
    RESULT IN THE UNINTENDED DEPLOYMENT OF
    AIR BAGS OR ACTIVATION OF THE ANTI-THEFT
    SYSTEM RESULTING IN DAMAGE TO THE VEHICLE
    AND PERSONAL INJURY.
    Caution:Various settings that have been stored in
    the memory in other on-board equipment (vehicle
    navigation etc.) may be lost if the battery terminals
    are disconnected.
    Therefore, we recommend to make a record of or to
    back up the settings before disconnecting the
    terminals.
    After completing installation of the main unit, set the
    equipment again according to the record. • Disconnect the cable from the negative  battery
    terminal (see warning and caution below).
    • Remove Mounting Collar 
    qfrom the main unit
    temporarily, which are already mounted at shipment.*
    • Unit should be installed in a horizontal position with
    the front end up at a convenient angle, but not more
    than 30˚.
    ❐Dashboard Installation
    Installation Opening
    This unit can be installed in any dashboard having an
    opening as shown below. The dashboard should be
    3/16” (4.75 mm) – 7/32” (5.56 mm) thick in order to be
    able to support the unit.
    Q’tyItemNo.Diagram
    q1 Mounting Collar*
    Plain washer (5mmø)
    w2
    Spring Washer (5mmø)e2
    Hex. Nut (5mmø)r2
    Rear Support Strapt1
    Hex. Bolt
    (5mmø 
    ×25 mm)y1
    Toothed Lock Washer
    (5mmø)u1
    Removal Tool
    (U-shaped)i2
    Antenna Connector
    o1
    Mounting bolt
    (5 mmø)
    qMounting collarRear support bracket
    (provided on the vehicle) Rubber cushion (option)
    (a) Using the rear support strap t
    (b) Using the rubber cushion (option) 
    						
    							CQ-4330U24
    Installation (Continued)
    Cautions:
    • We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
    • When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
    and fingers.
        
    1
    2
    3
    First complete the electrical connections, and then check them for correctness.(apage 26)
    The included Mounting Collar qis designed specially for this unit. Do not use it to attach any other model.
    Insert Mounting Collar qinto the
    dashboard, and bend the mounting tabs
    out with a screwdriver.
    Establish the rear connection of the unit.
    After fixing Power Connector, fix the rear of the unit
    to the vehicle body by either method (a) or (b)
    shown in the previous page.
    After installation reconnect the negative
    (–) battery terminal.
    The tabs to be bent vary depending on
    the vehicle.  To securely install the unit,
    fully bend a number of the tabs so that
    there is no rattling.
    Example:Ta b
    qMounting
    Collar
    Mounting Holes
    Mounting Bolt Power Connector
    Mounting springs (C)
    Engage the Mounting
    Springs (C) in the
    mounting holes of the
    Mounting Collar 
    qfirmly.
    Mounting SpringMounting
    Hole 
    						
    							CQ-4330U25
    To Remove the Unit from the vehicles dashboard
    Insert each Removal Tool iand pull.
    Note:Do not lose Removal Tools. They will be needed to remove the unit from the vehicles dashboard.
    iRemoval Tool
    (U-shaped) 
    						
    							CQ-4330U26
    Electrical Connections
    Cautions:
    • This wiring information is for experienced technical individual, for safety reason, please your dealer wire this
    connection.
    • This product is designed to operate with a 12 V DC, negative ground battery system.
    • To prevent damage to the unit, be sure to follow the connection diagram below.
    • Do not insert the power connector into the unit until the wiring is completed.
    • Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and
    keep cable terminals free from touching any metal parts.
    • Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased
    when the battery terminals are disconnected.
    ❐Wiring Diagram
    (Rear Side)
    CQ-4330U
    Antenna
     Antenna Connector
    XM control connector
    CD changer / XM control connector
    10 12 14 16
    7
    86 4253 1 9111315
    Accessory Power(ACC)
    (+12V DC, negative ground
     only)
    Ground Lead
    (Connect to a clean, bare
     metallic part of your vehicle)
    Battery Lead
    (Connect to vehicle battery) (Red)
    ACC
    Ground(Black)
    (Yellow)
    Battery
    (Violet)
    (Violet/Black)
    (Gray/Black)
    (Green)
    (Green/Black)
    (White/Black)(Gray) (white)
    Left Speaker
    (Front)Right Speaker
    (Front)Left Speaker
    (Rear)Right Speaker
    (Rear)
    Power Connector
    Detail of power connectorNO. FUNCTION NO. FUNCTION1BATTERY +12 V 9 REAR SP R (–)2GROUND 10 REAR SP R (+)3oooo11 FRONT SP R (–)4oooo12 FRONT SP R (+)5oooo13 FRONT SP L (–)6POWER +12 V ACC 14 FRONT SP L (+)7oooo15 REAR SP L (–)
    8oooo16 REAR SP L (+)
    The power connector does not come
    along with the unit. If need, please
    consult your dealer. O 
    						
    							CQ-4330U27
    Electrical Connections (Continued)
    Extension Cable for connecting the unit and the XM receiver.
    OThe Extension cable does not come along with the unit, 
        if need, please consult your dealer. XM ANT XM RECEIVER
    (XM-RVR-D-001)
    antenna
    RCA (Red) R
    8P DIN (Male) RCA (White) L
    contoroller/
    head unitR
    FM out
    audio outR
    L
    power
    XM control connector
    (10P connector)
    CQ-4330U
    XM control connector
    (2P connector)
    Note:
    For wiring, carefully read the operation instructions for the devices connected.
    ❐Upgrading the system (connect a XM receiver) 
    						
    							CQ-4330U28
    Electrical Connections
     
    CQ-4330U
    CD changer connector
    (10P connector)
    CD Changer (CD-DP880, option)
    Extension Cable for connecting the unit and CD changer.
    OThe Extension cable does not come along with the unit, 
        if need, please consult your dealer.XM control connector
    (2P connector)
    Note:
    For wiring, carefully read the operation instructions for the devices connected.
    ❐Upgrading the system ( connect a CD changer ) 
    						
    							CQ-4330U29
    Specifications
    ❐General
    Power Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
    Current consumption: Less than 2.5 A (tape mode, 0.5 W 4-speaker)
    Maximum Power Output: 37 W 
    ×4 channels at 400 Hz, Volume Control maximum
    Tone adjustment range:
    Bass: ± 12 dB at 100 Hz
    Treble: ± 12 dB at 10 kHz
    Power Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
    Suitable Speaker Impedance: 4-8 Ω
    Dimensions (W 
    ×H ×D): 7 ×1-15/16 ×6-1/10 (178 ×50 ×160 mm)
    Weight: 3 lbs. 12 oz (1.7k
    )
    ❐FM Stereo Radio
    Frequency Range: 87.9-107.9 MHz
    Useable Sensitivity: 12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB)
    50 dB Quieting Sensitivity: 17 dBf. (1.8 µV/ 75 Ω)
    Frequency Response: 30-15 000 Hz ±3 dB
    Alternate Channel Selectivity: 75 dB
    Stereo Separation: 35 dB at 1 kHz
    Signal/Noise Ratio: 70 dB (Mono)
    ❐AM Radio
    Frequency range: 530 kHz–1 710 kHz
    Usable sensitivity: 28 dB/µV (25 µV, S/N 20 dB)
    ❐Weather Band Radio
    Frequency Range: 162.40-162.55 MHz
    Useable Sensitivity: 3 dB/µV (S/N 20 dB)
    Signal/Noise Ratio (40 dB/µV): 50 dB
    ❐Tape Player
    Reproduction System: 4-track, 2-program stereo
    Tape Speed: 1-7/8/sec (4.76 cm/sec)
    FF/REW Time: Less than 110 sec (C-60)
    Frequency Response: 35-14 000 Hz ±3 dB
    Wow and Flutter: 0.12 % (WRMS)
    signal/Noise Ratio: 52 dB (Dolby NR on: 62 dB)
    Above specifications comply with EIA standards.
    Note:Specifications and design are subject to modification without notice due to improvements in technology.
    Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
    “DOLBY” and the double-D symbol 
    Aare trademarks of Dolby Laboratories Licensing Corporation. 
    						
    							YFM284C419ZA     TAMACO0304-0     Printed in Taiwan
    Panasonic Consumer Electronics
    Company, Division of Matsushita
    Electric Corporation of America
    One Panasonic Way, Secaucus,
    New Jersey 07094 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Cassette Weather Band Receiver Cq 4330u Operating Instructions