Panasonic Camera Recorder Ajhdc27hp Operating Instructions

							111
BLACK SHADING screen
The black shading adjustments are performed on this
screen.
ItemVariable
rangeRemarks
DETECTION==VF
displayENG For execution of the digital
shading compensation.
CORRECT (DIG) ON
OFF
ENG For setting the digital
shading compensation to
ON or OFF.
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens  FILM (CAM) MAIN MENU 4 (continued)
FLARE screen
The camera’s flare settings are performed on this
screen.
ItemVariable
rangeRemarks
R FLARE 000
:
100
VF
display
ENG For setting the R channel
flare; the preset value
differs from one camera to
another.
G FLARE 000
:
100ENG For setting the G channel
flare; the preset value
differs from one camera to
another.
B FLARE 000
:
100ENG For setting the B channel
flare; the preset value
differs from one camera to
another.
COLORIMETRY screen
The luminance signal standard is selected on this
screen.
ItemVariable
rangeRemarks
MATRIXSMPTE-274
SMPTE-240
NTSC
VF
display
ENG For selecting the
luminance signal
standard.
INITIALIZE screen
The film or camera menu settings are initialized and
scene files are saved on this screen.
ItemVariable
rangeRemarks
READ FACTORY
DATA==VF
displayENG For restoring the film or
camera menu data
settings to the factory
settings.
WRITE USER
DATA==ENG For saving the user’s own
film or camera menu data
in the unit’s memory.
SCENE SEL 1
:
4
ENG For designating the
number of the scene file.
READ==ENG For loading the scene file
whose SCENE SEL was
designated.
WRITE==ENG For saving data in the
scene file whose SCENE
SEL was designated.
RESET==ENG For restoring the scene file
data settings to the factory
settings.
TITLE 1==ENG For setting the title in
scene file No.1.
TITLE 2==ENG For setting the title in
scene file No.2.
TITLE 3==ENG For setting the title in
scene file No.3.
TITLE 4==ENG For setting the title in
scene file No.4.

OSince SYSTEM FREQ may change as a result of executing the
READ FACTORY DATA, turn the power off and then back on
again.
OItem  will be saved regardless of the ECU DATA SAVE
setting.
E
WHITE SHADING screen
The white shading adjustments are performed on this
screen.
ItemVariable
rangeRemarksVF
display
DETECTION
(V SAW)==ENG For executing vertical
white shading
compensation.
CORRECT ONOFFENG For setting the shading
compensation to ON or
OFF.
SCUF E
SCUF E
E
E
E
FE
FE

The white shading adjustment value and the flare setting value can
be written to the internal memory as a lens file.

 
 
						

							112
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens  FILM (CAM) MAIN MENU 4 (continued)
DIAGNOSTIC screen
The usage statuses and software versions are
displayed on this screen.
ItemVariable
rangeRemarks
CAMSOFT (IN)==VF
displayENG For displaying the version
of the software for the
built-in flash memory.
CAMSOFT (OUT)==ENG For displaying the version
of the software for the
external flash memory.
CAM TABLE==ENG For displaying the version
of the gamma table.
PLD (CAM)==ENG For displaying the version
of the software for the
camera system computer.
PLD (SHD)==ENG For displaying the version
of the software for the
shading.
SUB menuVF
displayRemarks
S/NENG Index for opening the S/N
measurement screen.
MODULATIONENG Index for opening the modulation
measurement screen.
RESOLUTIONENG Index for opening the resolution
measurement screen.
SENSITIVITYENG Index for opening the sensitivity
measurement screen.
EVALUATION screen
The items which are measured for evaluation
purposes are set on this screen.
(S/N, MODULATION, RESOLUTION, SENSITIVITY)

OFor details on how to release ENG SECURITY, consult your
nearest service center.
OItem  will be saved regardless of the ECU DATA SAVE
setting.
E
OPTION screen
The engineer menu display is selected on this screen.
ItemVariable
rangeRemarks
ENG SECURITY ON
OFF
VF
display
ENG For selecting whether to
display the engineer
menu.
ON:The engineer menu
is not displayed.
OFF:The engineer menu
is displayed.
SHD, ABB SW
CTRLON
OFFENGFor selecting whether to
automatically correct black
shading when the AUTO W/B
BAL switch is pressed
continuously for 8 seconds or
more on the ABB side.
ON:Black shading is
corrected automatically.
OFF:Black shading is not
corrected automatically.
AWB AREA 25%50%
90%ENGFor selecting the white
balance search area.
AWB & ABB
OFFSETON
OFFENG For setting how gain and
pedestal values, which are
set on the ROP screen of
FILM (CAM) MAIN MENU
1, are to be processed
after auto white balance
and auto black balance
are performed.
ON:Settings are added.
OFF:The values are reset
to zero.
CAM MENU SELVIDEO MENUFILM MENUENG For setting the unit’s
operation mode.
VIDEO MENU:
The unit is set to the
video mode.
When VIDEO MENU is
selected, the FILM
USER MENU and FILM
MAIN MENU displays
will be changed to CAM
USER MENU and CAM
MAIN MENU.
FILM MENU:
The unit is set to the film
mode.

When setting this item on
the AJ-EC3 extension
control unit, after switching
to this item first, then turn
ECU DATA SAVE item
ON on the CAM SW
MODE screen in FILM
(CAM) MAIN MENU2.
PLD (FM)==ENG For displaying the version
of the software program
for the frame memory.
UFE
UFE
UFE
UFE
CU F E

 
 
						

							113
Setting menu screens  FILM (CAM) MAIN MENU 4 (continued)
EVALUATION screen
The underlining in the variable range column indicates the setting in
the preset mode.
OS/N measurement screen
The S/N measurements are performed on this screen.
ItemVariable
rangeRemarks
S/N ON
VF
display
ENGFor setting the S/N
measurement.
DETAIL ON
OFFENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFFENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFFENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFFENG For setting the MATRIX to
ON or OFF.
FLARE ON
OFFENG For setting the FLARE to
ON or OFF.
M. PED –200
:
+140
:
+200
ENG For adjusting the master
pedestal level.
OModulation measurement screen
The modulation measurements are performed on
this screen.
ItemVariable
rangeRemarks
MODULATION ON
VF
display
ENG For setting the modulation
measurement.
DETAIL ON
OFFENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFFENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFFENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFFENG For setting the MATRIX to
ON or OFF.
FLARE ON
OFFENG For setting the FLARE to
ON or OFF.
M. PED
(FILM MENU)
(CAM MENU)–200
:
+000
:
+018
:
+200
ENG For adjusting the master
pedestal level.
OPTION screen
ItemVariable
rangeRemarks
EVF SEL MONOCOLOR
VF
display
ENG The EVF terminal video
signal will be switched. 
MONO:
Only the Y signal is
output to the EVF
connecter.
COLOR:
The Y, Pb, and Pr
signals are output to the
EVF connecter.
Currently there is no
viewfinder to support
this.
SUPER DTL ON
OFFENG For selecting the kind of
detail to be provided.
ON:
A stronger detail than
usual is provided.
OFF:
The same level of detail
as usual is provided.

OWhen the frame frequency setting has been changed, it is
necessary to restart the unit by turning the POWER switch to OFF
and then to ON again for the setting to be switched.
OWhen MONO has been selected as the EVF SEL item setting, the
marker displays are set on the VF MARKER screen of FILM
(CAM) MAIN MENU 2.  When COLOR has been selected instead,
they are set using MONITOR MARKER on the VTR MAIN MENU
screen.  Furthermore, when COLOR is selected, the EVF ZEBRA
and EVF DETAIL functions no longer work.
OWhen setting SUPER DTL to ON, please adjust the H.DTL
LEVEL, H.DTL FREQ and DTL CLIP values. Also, please adjust
the V.DTL LEVEL according to these values.
OItem  will be saved regardless of the ECU DATA SAVE
setting.
E
SYSTEM FREQ. 59.94Hz60.00HzENG For setting the unit’s frame
frequency.
UFE
UFE
UFE

The EVALUATION screen items are returned to their default
settings as soon as the menu is exited.

 
 
						

							114
Setting menu screens  FILM (CAM) MAIN MENU 4 (continued)
OResolution measurement screen
The resolution measurements are performed on
this screen.
ItemVariable
rangeRemarks
RESOLUTION ON
VF
display
ENG For setting the resolution
measurement.
DETAIL ON
OFFENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFFENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFFENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFFENG For setting the MATRIX to
ON or OFF.
FLARE ON
OFFENG For setting the FLARE to
ON or OFF.
M. PED
(FILM MENU)
(CAM MENU)–200
:
+000
:
+018
:
+200
ENG For adjusting the master
pedestal level.
OSensitivity measurement screen
The sensitivity measurements are performed on
this screen.
ItemVariable
rangeRemarks
SENSITIVITY ON
VF
display
ENG For setting the sensitivity
measurement.
KNEE ON
OFFENG For setting the KNEE to
ON or OFF.
W. CLIP ON
OFFENG For setting the white clip
to ON or OFF.
M. PED
(FILM MENU)
(CAM MENU)–200
:
+000
:
+018
:
+200
ENG For adjusting the master
pedestal level.



						

							115
VTR MAIN MENU screen
SUB menuVF
displayRemarks
FUNCTIONENG Index for opening the FUNCTION
screen.
BATTERY/
TAPEENG Index for opening the BATTERY/TAPE
screen.
BATTERY
SETTINGENG Index for opening the BATTERY
SETTING screen.
VTR VF
INDICATORENG Index for opening the VTR VF
INDICATOR screen.
MIC/AUDIOENG Index for opening the MIC/AUDIO
screen.
TC/UBENG Index for opening the TC/UB screen.
TIME/DATEENG Index for opening the TIME/DATE
screen.
VTR USER
MENU SELECTENG Index for opening the VTR USER
MENU SELECT screen.
VTR CARD
READ/WRITEENG Index for opening the VTR CARD
READ/WRITE screen.
VTR INITIALIZEENG Index for opening the VTR INITIALIZE
screen.
DIAGNOSTICENG Index for opening the VTR
DIAGNOSTIC screen.
Setting menu screens  VTR MENUS



						

							116
Setting menu screens  VTR MAIN MENU
FUNCTION screen
The VTR’s functions are set on this screen.
ItemVariable
rangeRemarks
NEWS REC
MODEOFF0.2
:
2.0
VF
display
USER
ENGFor selecting the VTR
START button
acknowledgment time
during recording.
OFF:The pressing of the VTR
START button is
acknowledged
immediately, recording is
stopped, and the unit is set
to the REC PAUSE mode.
0.2—2.0:The pressing of the VTR
START button is not
acknowledged and
recording is continued for
the time set (in increments
of 0.2 sec.).
ItemVariable
rangeRemarksVF
display
HUMID OPE ON
OFFUSER
ENGFor selecting the VTR
operation when
condensation has formed.
ON:Operation is
continued as usual.
OFF:Operation of all
controls except the
POWER switch and
EJECT button is
inhibited.
REC START ALL
NORMALUSER
ENGFor selecting
acknowledgement of recording
started by the VTR START
button.
ALL:The start of the recording is
acknowledged regardless of
the VTR mode.
NORMAL:The start of the recording is
acknowledged only in the
STOP (POWER SAVE) mode
and REC PAUSE mode.
PAUSE TIMER 10
20
30
60
USER
ENGFor selecting the amount of
time REC PAUSE is to be held.
10/20/30/60:10, 20, 30 or 60
minutes.
RETAKE MODE ON
OFFUSER
ENGFunctions for rewinding
the tape to the position
where recording started.
ON:The RETAKE
function works.
OFF:The RETAKE
function does not
work.

The RETAKE function is
set OFF when the unit’s
power switch has been set
to ON.
INTERVAL REC
MODEON
ONE SHOT
OFFUSER
ENGFor selecting the
intermittent recording
mode.
ON:Intermittent recording
is performed.
ONE SHOT:Intermittent
recording is performed
once and then stopped.
OFF:Intermittent recording
is not performed.

Intermittent recording is set
OFF when the unit’s power
switch has been set to ON.
INTERVAL REC
TIME00s10f
:
59s29f
USER
ENGFor setting the REC time for
intermittent recording.

When REC time is set at
less than 1 second, the
initial recording time will
be 1 second.
INTERVAL
PAUSE TIME00h00m02s:23h59m59s
USER
ENGFor setting the REC
PAUSE time for
intermittent recording.
The underlining in the variable range column indicates the setting in
the preset mode.
CU F
CU F
CU F
CU F
CF
F
CU F
CU F
CU F
CU F
CU F
ECU REC CHK
SWR. REVIEWRETAKEUSER
ENGFor selecting the unit
operation when the REC
CHK button on the AJ-
EC3 extension control unit
is pressed.
R. REVIEW:
Rec review is performed.
RETAKE:
Retake is performed,
then playback.
CHARACTER
ON SDIMENU
STATUS
USER
ENGFor selecting the item to
be superimposed on the
SDI output signals.
MENU:
The menu screen is
superimposed.
STATUS:
The menu screen and
viewfinder status display
are superimposed.

Neither of these items will
be superimposed when
the CHARACTER switch
on the side panel is set to
OFF.
COMPRESSION
MODENORMALDARKUSER
ENGFor selecting the DVCPRO
compression mode.
NORMAL:
Normal shooting is
conducted in this mode.
DARK:
This modes reduces the
distortion in the compressed
images which occurs in the
dark areas of the images.
However, the distortion in
the compressed images in
other areas may be
increased.



						

							117
BATTERY/TAPE screen
ItemVariable
rangeRemarks
BATT NEAR
END ALARMON
OFF
VF
display
USER
ENGFor setting the warning
tone heard when the
battery is near the end of
its charge to ON or OFF.
BATT NEAR
END CANCELON
OFFUSER
ENGFor switching the function
which cancels the warning
tone heard when the
battery is near the end of
its charge to ON or OFF
using the MODE switch.
BATT END
ALARMON
OFFUSER
ENGFor setting the warning
tone heard when the
battery is at the end of its
charge to ON or OFF.
BATT REMAIN
FULL100%
70%USER
ENGFor selecting the battery
capacity at which “FULL”
is to appear on the LCD
display window as the
remaining battery display
(for all 7 segments to be
lighted).
TAPE NEAR
END ALARMON
OFFUSER
ENGFor setting the warning
tone heard when the end
of the tape is near to ON
or OFF.
TAPE NEAR
END TIME3min
2minUSER
ENGFor setting the remaining
tape time for which the
warning tone is to be
heard when the end of the
tape is near.
TAPE END
ALARMON
OFFUSER
ENGFor setting the warning
tone heard when the tape
has reached its end to ON
or OFF.
TAPE REMAIN/$3min/$5min/$USER
ENGFor setting the time for
one segment of the
remaining tape display
indicated on the LCD
display window.
3min/$:One segment is
set to 3 minutes.
5min/$:One segment is
set to 5 minutes.
BATTERY/TAPE screen
Select the settings which match the type of battery
used on this screen.
The warning tone which signals the remaining battery
charge and remaining tape and which is heard during
shooting can be switched off if they prove to be
distracting.
ItemVariable
rangeRemarks
BATTERY
SELECTAJ-BP490
AU-BP402
PRO14
TRIM14
TRIM13
DIGITAL14
DIONIC90
DIONIC160
BP-H90
BP-H100
NP-L50
ENDURA50
ENDURA-D
BP-L60/90
VF
display
USER
ENGFor selecting the type of
battery used.
AJ-BP490:AJ-BP490
battery
AU-BP402:AU-BP402
battery
PRO14:Anton/Bauer
PRO14 battery 
TRIM14:Anton/Bauer
TRIM14 battery
TRIM13:Anton/Bauer
TRIM13 battery
DIGITAL14:Anton/Bauer
DIGITAL
battery (14V)
DIONIC90:Anton/Bauer
DIONIC90
DIGITAL
battery
DIONIC160:Anton/Bauer
DIONIC160
DIGITAL
battery
BP-H90:IDX BP-H90
battery
BP-H100:IDX BP-H100
battery
NP-L50:IDX NP-L50
battery
ENDURA50:IDX
ENDURA50
battery
ENDURA-D:When mounting
the V-mount
adapter plate
made by IDX to
use a digital
battery
BP-L60/90:Sony BP-
L60/90 battery 
EXT DC IN
SELECTAC-ADPTAJ-BP490
AU-BP402
PRO14
TRIM14
BP-H90
BP-H100
BP-L60/90
USER
ENGFor selecting the power
source to be connected to
the DC IN socket.
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens  VTR MAIN MENU (continued)
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F



						

							118
Setting menu screens  VTR MAIN MENU (continued)
1. Either “¢
” or “≥” appears in front of each item to indicate whether
the item is set to ON or OFF.
¢
:ON
≥:OFF
2. Each time the JOG dial button is pressed, the setting moves in
the following sequence:
7
AUTO:The NEAR END voltage value preset in each battery
is used.
MANUAL:The NEAR END voltage setting for each battery can
be changed.
7
7
Item movement
NEAR END voltage setting
AUTO/MANUAL setting
ON/OFF setting
BATTERY SETTING screen
The type of battery to be used is selected and its
settings are performed on this screen.
ItemVariable
rangeRemarks
AJ-BP490 MANUAL
AUTO
VF
display
ENG For setting the AJ-BP490
and the PACO HP-90A
battery.
AU-BP402 MANUAL
AUTOENG For setting the AU-BP402
battery.
PRO14 MANUAL
AUTOENG For setting the
Anton/Bauer PRO14
battery.
TRIM14 MANUAL
AUTOENG For setting the
Anton/Bauer TRIM14
battery.
TRIM13 MANUAL
AUTOENG For setting the
Anton/Bauer TRIM13
battery.
DIGITAL14 MANUAL
AUTOENG For setting the
Anton/Bauer digital battery
(14V).
DIONIC90 MANUAL
AUTOENG For setting the
Anton/Bauer DIONIC90
digital battery.
DIONIC160 MANUAL
AUTOENG For setting the
Anton/Bauer DIONIC160
digital battery.
BP-H90 MANUAL
AUTOENG For setting the IDX BP-
H90 battery.
BP-H100 MANUAL
AUTOENG For setting the IDX BP-
H100 battery.
NP-L50 MANUAL
AUTOENG For setting the IDX NP-
L50 battery.
ENDURA50 MANUAL
AUTOENG For setting the IDX
ENDURA50 battery.
ENDURA-D MANUAL
AUTOENG For use when mounting
the V-mount adapter plate
made by IDX to use a
digital battery
BP-L60/90 MANUAL
AUTOENG For setting the Sony BP-
L60/90 battery.
The underlining in the variable range column indicates the setting in
the preset mode.
MONITOR MARKER screen
Using the menu settings on this screen, it is possible
to select the display used for the safety zone and other
markers for the HD SDI MON connector and also for
the EVF connector when COLOR has been selected
as the EVF SEL item setting on the OPTION menu
from FILM (CAM) MAIN MENU 4.
ItemVariable
rangeRemarksVF
display
SAFTY ZONE 16:9
4:3
OFFUSER
ENGFor selecting the safety
zone (90%).
CENTER MARK ON
OFFUSER
ENGFor selecting ON or OFF
for the center marker
display.
FRAME SIG 4:314:9
VISTA
CNSCOUSER
ENGFor switching the frame
marker display.
VISTA :1:1.85
CNSCO :1:1.235
MARK ON
OFFUSER
ENGFor selecting ON or OFF
for the frame marker
display.

Set the marker displays to appear on a regular black-and-white
viewfinder on the VF MARKER screen of FILM (CAM) MAIN MENU
2.
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F



						

							119
Setting menu screens  VTR MAIN MENU (continued)
The underlining in the variable range column indicates the setting in
the preset mode.
ItemVariable
rangeRemarksVF
display
SAVE LEDSAVE&TAPESAVEUSER
ENGFor setting the operation
of the SAVE lamp.
SAVE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
When the tape is
approaching its end, it
flashes in tandem with
the warning alarm that
sounds when tape-end is
approaching.
VTR VF INDICATOR screen
The information to be displayed in the viewfinder is set
on this screen.
ItemVariable
rangeRemarks
TAPE (IND)ON
OFF
VF
display
USER
ENGFor switching the
remaining tape display to
ON or OFF.
BATTERY (IND)ON
OFFUSER
ENGFor switching the battery
voltage display to ON or
OFF.
LEVEL METER
(IND)CH1
CH1•CH2
OFFUSER
ENGFor selecting what the
audio level meter is to
display.
CH1:The level of the CH1
signals only is displayed.
CH1•CH2:The levels of
both the CH1 and CH2
signals are displayed.
OFF:No display.
AUDIO IN (IND) ON
OFFUSER
ENGFor switching the audio
input display to ON or OFF.
ON:The audio input is
displayed.
OFF:The audio input is not
displayed.
TC (IND) TCG
TCR
TCG/TCR
OFFUSER
ENGFor selecting what the
time code is to display.
TCG:The time code
generated by the time
code generator is
displayed in the E-E
mode.
TCR:The time code reader
value is displayed in the
V-V mode.
TCG/TCR:The time code
generated by the time
code generator is
displayed in the E-E
mode; the time code
reader value is displayed
in the V-V mode.
OFF:The time code is not
displayed.
VTR WARNING
(IND)ALWAYS
NORMAL
OFF
USER
ENGFor setting when the
VTR’s warnings are to be
displayed.
ALWAYS:The warning
display always appears
when a warning has
occurred.
NORMAL:The display
appears for 3 seconds
after the warning
occurred and for 3
seconds after recording
was started or
completed.
OFF:The warning displays
do not appear.
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
ItemVariable
rangeRemarks
FRONT MIC
POWERON
OFF
VF
display
USER
ENGON:The phantom power
is supplied to the
front microphone.
OFF:The phantom power
is not supplied to the
front microphone.
COMPRESSION
(IND)ON
OFFUSER
ENGFor setting the compression
mode display to ON or OFF.
ON:“COMP” appears at
the top right when
DARK has been
selected as the
COMPRESSION
setting on the
FUNCTION screen.
OFF:The compression
mode is not
displayed.
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F
CU F



						

							120
Setting menu screens  VTR MAIN MENU (continued)
ItemVariable
rangeRemarksVF
display
MIC LOWCUT
CH2FRONT
REAR
F&R
OFFUSER
ENGFor setting the high-pass
filter for the CH2 mic input.
FRONT:The high-pass filter
for the front mic
input is set to ON.
REAR:The high-pass filter
for the rear mic
input is set to ON.
F&R:The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF:The high-pass filter
for the CH2 input is
set to OFF.
LIMITER ON
OFFUSER
ENGFor switching the audio
limiter to ON or OFF.
ON:The limiter operates.OFF:The limiter does not
operate.
TEST TONE NORMAL
ALWAYS
OFF
CHSEL
USER
ENGNORMAL:
The test tone signal is
output when the AUDIO
IN switch for CH1 is set
to front while BAR is
selected as the
CAM/BAR switch setting.
ALWAYS:
The test tone signal is
always output when BAR
is selected as the
CAM/BAR switch setting.
OFF:
The test tone signal is
not output.
CHSEL:
The test tone signal is
output for the selected
channel when the
AUDIO IN switch CH1 or
CH2 is set to front while
BAR is selected as the
CAM/BAR switch setting.
CUE SELECT SIDE SWCH1
CH2
MIXUSER
ENGFor setting the audio
signals to be recorded on
the cue track.
SIDE SW:
The signals selected by
the CUE switch on the
side panel are recorded.
CH1:
The CH1 signals are
recorded.
CH2:
The CH2 signals are
recorded.
MIX:
The CH1 and CH2
mixed signals are
recorded.
EMBEDDED
AUDIO (60 Hz)ON
OFFUSER
ENGFor setting whether the
embedded audio signals
are to be output to the HD
SDI MON connector and
HD SDI EE connector
when 60.00 Hz has been
selected as the frame
frequency setting.
ON :The embedded
audio signals are
output.
OFF :The embedded
audio signals are not
output.
The underlining in the variable range column indicates the setting in
the preset mode. 
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
MIC/AUDIO screen
ItemVariable
rangeRemarksVF
display
MIC LOWCUT
CH1FRONT
REAR
F&R
OFFUSER
ENGFor setting the high-pass
filter for the CH1 mic input.
FRONT:The high-pass filter
for the front mic
input is set to ON.
REAR:The high-pass filter
for the rear mic
input is set to ON.
F&R:The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF:The high-pass filter
for the CH1 input is
set to OFF.
A/V SYNCHRO ON
OFFUSER
ENGAt low frame rates, the
images lag behind the
sound.  This item is used
to select whether this lag
is to be adjusted.
ON:
The lag is adjusted so
that the timing of the
images is more or less
in synchronization with
the timing of the sound.
OFF:
The lag is not adjusted.
The same operations as
in previous models are
performed.

OWhen ON has been selected as the A/V SYNCHRO item setting,
noise may be carried on the audio signals at those moments
when the frame rate is switched.
OThe timing of the images and the timing of the sound are fixed
while recording is in progress.  This means that these two timings
may not be in synchronization when the frame rate is switched
during recoding even when ON has been selected as the A/V
SYNCHRO item setting.
OAt frame rates of 12P and less, it is not possible for the timing of
the images and the timing of the sound to be in synchronization
even when ON has been selected as the A/V SYNCHRO item
setting.  The 12P timing will be fixed.
CU F
CU F
CU F
CU F
CU F
CU F
CU F