Panasonic Camera Recorder Ajhdc27hp Operating Instructions
Have a look at the manual Panasonic Camera Recorder Ajhdc27hp Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101 VF INDICATOR screen The information to be displayed inside the viewfinder is set on this screen. ItemVariable rangeRemarks EXTENDERON OFF VF display USER ENGFor setting the extender display to ON or OFF. SHUTTERON OFFUSER ENGFor setting the shutter speed display to ON or OFF. FILTERON OFFUSER ENGFor setting the filter No. display to ON or OFF. WHITEON OFFUSER ENGFor setting the AWB PRE/A/B display to ON or OFF. GAINON OFFUSER ENGFor setting the currently selected gain display to ON or OFF. IRIS S IRIS S+IRIS OFF USER ENGS:Only the super iris ON status is displayed. IRIS:Only the aperture value is displayed. S+IRIS:Both the super iris ON status and the aperture value are displayed. OFF:Neither the super iris ON status nor the aperture value is displayed. CAMERA IDON OFFUSER ENGFor setting the ID display during color bar displaying. ZOOM LVL ONOFFUSER ENGFor setting the zoom position value display to ON or OFF. COLOR TEMPON OFFUSER ENGFor setting the color temperature display to ON or OFF. FRAME RATEON OFFUSER ENGFor setting the frame rate display to ON or OFF. VERSION ID (FILM MENU)ON OFFUSER ENGFor displaying the gamma curve used when the internal color bar signal recording mode is established. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) VF MARKER screen The information to be displayed inside the viewfinder is set on this screen. ItemVariable rangeRemarks SAFETY ZONE OFF 1 : 3 : 12 VF display USER ENGFor selecting the safety zone display. 1:80% and 90% corner display 2:80% corner display 3:90% corner display 4:80% and 90% box display 5:80% box display 6:90% box display 7:80% and 90% corner display in 4:3 mode 8:80% corner display in 4:3 mode 9:90% corner display in 4:3 mode 10 :80% and 90% box display in 4:3 mode 11 :80% box display in 4:3 mode 12 :90% box display in 4:3 mode CENTER MARKON OFFUSER ENGFor setting the center marker display to ON or OFF. FRAME SIG 4 : 313 : 9 14 : 9 VISTA CNSCOUSER ENGFor selecting the frame marker display. (VISTA = 1 : 1.85) (CNSCO = 1 : 2.35) MARK ON OFFUSER ENGFor setting the frame marker display to ON or OFF. LVL 00 : 15USER ENGFor setting the picture levels on the outside of the frame marker. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
102 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) 1. Turn the JOG dial button to move the arrow (cursor) to the ID 1:, ID 2: or ID 3: item. 2. When the JOG dial button is pressed, the arrow (cursor) moves to the ID input area, and the input mode is established. 3. Press the JOG dial button again and turn it until the character to be set is displayed. When the button is turned, the character displayed is switched in the following sequence: Space:3 7 letters: A—Z 7 numbers: 0—9 7 symbols: ’, >,
103 SHUTTER SELECT screen A shutter speed is set in each POSITION item on this screen. ItemVariable rangeRemarks SYNCHRO SCAN 290.0 deg : 180.0 deg : 225.0 deg VF display ENG For selecting the shutter speed which is to be set in SYNCHRO SCAN 2. POSITION 1 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 1. POSITION 2 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 2. POSITION 3 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 3. ItemVariable rangeRemarksVF display POSITION 4 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 4. POSITION 5 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 5. POSITION 6 SEL (FILM MENU) (CAM MENU)180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 6. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
104 CAMERA SW MODE screen The modes of the camera switches are set on this screen. ItemVariable rangeRemarks FILTER INH ON OFF VF display USER ENGFor selecting whether or not the data in the AWB memories (channel A, channel B) is to be held for each filter. ON: Only the channel A and channel B memories (2 memories) regardless of the filter. OFF: The data is held for each of the filters (4a2 = 8 memories). SHOCKLESS AWBOFFNORMAL SLOW FASTUSER ENGFor selecting the SHOCKLESS AWB setting. “SHOCKLESS AWB” means that the switching of the WHITE BAL switch to A, B or PRST is not accompanied by a shock. FAST (high-speed: approx. 0.5 sec.), NORMAL (normal speed: approx. 1 sec.) or SLOW (slow: approx. 3 sec.) can be set for this effect. COLOR BARS SMPTEFULL BARSUSER ENGFor selecting the color bar signals. SMPTE: SMPTE color bars FULL BARS: Full color bars S. GAIN OFF S.GAIN L/M/HUSER ENGFor selecting the method for releasing the super gain mode. S.GAIN: The mode is released by the super gain switch only. L/M/H: The mode is released by changing the L/M/H switch setting. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) When ON has been selected for both GAIN (0 dB) and GAIN (–3 dB), the lamp will light at all gain levels except for –3 dB and 0 dB. ! LED screen The display of the lamp which appears inside the viewfinder is set to ON or OFF on this screen. ItemVariable rangeRemarks GAIN (0 dB) ON OFF VF display USER ENGFor setting whether the lamp is to be turned on when the gain level is other than 0 dB. GAIN (–3 dB) ON OFFUSER ENGFor setting whether the lamp is to be turned on when the gain level is other than –3 dB. SHUTTERON OFFUSER ENGFor setting whether the lamp is to be turned on when the shutter is ON. WHITE PRESET ON OFFUSER ENGFor setting whether the lamp is to be turned on when PRESET is selected as the AWB channel setting. EXTENDERON OFFUSER ENGFor setting whether the lamp is to be turned on when the lens has been set to the EXTENDER mode. FILTER ON OFFUSER ENGFor setting whether the lamp is to be turned on when a filter other than 3200 K is used. BLACK STR ON OFFUSER ENGFor setting whether the lamp is to be turned on when black stretch has been set to ON. D5600 K (CAM MENU)ON OFFUSER ENGFor setting whether the lamp is to be turned on when the preset white balance level is 5600 K. MATRIX ON OFFUSER ENGFor setting whether the lamp is to be turned on when matrix has been set to ON. COLOR CORRECTIONON OFFUSER ENGFor setting whether the lamp is to be turned on when color correction has been set to ON. FRAME RATE ON OFF USER ENGFor setting whether the lamp is to be turned on when the frame rate less than 11 fps is used. DAY LIGHT (FILM MENU)ON OFFUSER ENGFor setting whether the lamp is to be turned on when the white balance preset value is the daylight type. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
105 ItemVariable rangeRemarksVF display CAMERA SW MODE screen USER2 SW (CAM MENU) (FILM MENU)INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE USER ENGFor allocating the functions in USER2 button. OWhen B.STR has been selected as this item’s setting, the function for setting the black level gradation compensation to +3 is allocated. OWhen Y GET has been selected as this item’s setting, the function for measuring the output luminance level is allocated. The output luminance level of the area near the center marker in the viewfinder is displayed in percentage units in the middle of the viewfinder screen for approximately 3 seconds. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) ItemVariable rangeRemarks S. BLK LVL OFF–10 –20 –30 VF display USER ENGFor setting the super black level. ECU DATA SAVEON OFFUSER ENGON:The data controlled by the AJ-EC3 extension control unit is stored in the memory. OFF:The data is not stored in the memory. AUTO KNEE SW (FILM MENU) (CAM MENU)ON OFF ONOFF USER ENGFor setting whether the AUTO KNEE function is to be made operational when the OUTPUT/AUTO KNEE switch on the side panel has been set to the CAM AUTO KNEE ON position. ON :The AUTO KNEE function is made operational. OFF :The AUTO KNEE function is not made operational. USER1 SW (FILM MENU) (CAM MENU)INH S.GAINS.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE USER ENGFor allocating the functions in USER1 button. OWhen B.STR has been selected as this item’s setting, the function for setting the black level gradation compensation to +3 is allocated. OWhen Y GET has been selected as this item’s setting, the function for measuring the output luminance level is allocated. The output luminance level of the area near the center marker in the viewfinder is displayed in percentage units in the middle of the viewfinder screen for approximately 3 seconds. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E When the same function has been allocated to both the USER1 button and the USER2 button, please use the USER2 button.
106 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) SUPER GAIN screen The gain allocated to the SUPER GAIN switch is set on this screen. ItemVariable rangeRemarks S. GAIN VALUE 18dB24dB 30dB 36dB VF display USER ENGFor selecting the gain when the SUPER GAIN switch is pressed. FRAME MODE screen The frame rate is set on this screen. ItemVariable rangeRemarks FRAME RATE RANGE60-1260-4 VF display USER ENGFor selecting the variable range of the frame rate. 60-12: 60 fps to 12 fps 60-4: 60 fps to 4 fps FRAME RATE (CAM MENU) (FILM MENU)60 : 24 : 4 USER ENGFor setting the frame rate. When “60-12” has been selected as the FRAME RATE RANGE setting, the frame rate cannot be set to 11 fps or below. SCAN REVERSE ON OFFUSER ENGThis function is for correcting the images when the prime lens is used. ON :The images are corrected (by reversing their top and bottom and their left and right). OFF:The images are not corrected. SCUF ESCUF E SCUF E SCUF E SCUF E USER SW FRAME RATE60 : 24 : 12 USER ENGFor setting the frame rate to be allocated to the USER1 or USER2 button. Using the USER1 or USER2 button to switch the frame rate OOnce the desired frame rate has been set in a USER (USER1 or USER2) button by performing menu operations, subjects can be shot at the set frame rate simply by pressing the USER button. The original frame rate is restored when the USER button is pressed again. OWhile recording is in progress, the frame rate will not be switched even when the USER button is pressed. OWhen the frame rate has been switched using the USER button, the switched rate will not take effect even if one of the synchro scan switches (“+” or “– ”) is pressed after the JOG dial button is pressed.
107 CAM CARD R/W SELECT screen ItemVariable rangeRemarksVF display CAM CARD R/W SELECT screen The settings for saving (recording) specific menu data on the SD memory card and loading (reading) the data from the card are performed on this screen. ItemVariable rangeRemarks ID READ/WRITE ON OFF VF display USER ENGFor setting camera ID saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The camera ID is recorded/loaded. OFF:The camera ID is not recorded/loaded. Example: If the CAMERA ID contents are not to be changed when SD memory card data is saved/loaded, select OFF as the ID READ/WRITE setting. CAM MAIN MENU1 LEVEL R/WON OFFUSER ENGFor setting FILM (CAM) MAIN MENU 1 (items other than those marked with }) data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The data is recorded/loaded. OFF:The data is not recorded/loaded. See page 89 for information on the items marked with }. CAM MAIN MENU1 SW (}) R/WON OFFUSER ENGFor setting FILM (CAM) MAIN MENU 1 (items marked with }) data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The data is recorded/loaded. OFF:The data is not recorded/loaded. CAM MAIN MENU2 R/WON OFFUSER ENGFor setting FILM (CAM) MAIN MENU 2 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The data is recorded/loaded. OFF:The data is not recorded/loaded. CAM MAIN MENU3 R/WON OFFUSER ENGFor setting FILM (CAM) MAIN MENU 3 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The data is recorded/loaded. OFF:The data is not recorded/loaded. CAM MAIN MENU4 R/WON OFFUSER ENGFor setting FILM (CAM) MAIN MENU 4 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON:The data is recorded/loaded. OFF:The data is not recorded/loaded. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 3 CAM CARD READ/WRITE screen The settings for saving (writing) the menu data on the SD memory card, loading (reading) the data from the card, and configuring the card are performed on this screen. ItemVariable rangeRemarks READ==VF displayUSER ENGFor loading the data from the SD memory card. SELECT1 : 8USER ENGFor selecting the number of the file to be loaded. WRITE==USER ENGFor saving the camera’s data on the SD memory card. SELECT1 : 8USER ENGFor selecting the number of the file to be saved. CARD CONFIG==USER ENGFor formatting the SD memory card. TITLE READ==USER ENGFor reading the titles given to the data saved on the SD memory card. READ USER DATA==USER ENGFor loading the user area data of the camera’s memory. TITLE 1: to TITLE 8:¢¢¢¢¢¢ ¢¢USER ENGA title consisting of up to 8 characters can be given to each file. OIWhen the frame frequency setting has been changed, it is necessary to restart the unit by turning the POWER switch to OFF and then to ON again for the setting to be switched. OItem will be saved regardless of the ECU DATA SAVE setting. E FE FE E E E E E E
WRITE==USER ENGFor writing lens files to the SD memory card. 108 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 3 (continued) GENLOCK/IRIS screen The genlock and iris control settings are performed on this screen. ItemVariable rangeRemarksVF display H PHASE COARSE00 : 15USER ENGFor coarsely adjusting the H phase during genlock. H PHASE FINE 00 : 64USER ENGFor finely adjusting the H phase during genlock. A. IRIS LEVEL 000 : 050 : 100 USER ENGFor setting the auto iris target level. The brightness (iris) is controlled using this value. The higher the value selected, the higher the brightness. A. IRIS PEAK/AVE000 : 050 : 100 USER ENGFor setting the ratio between the auto iris peak and average value. The closer the setting is to 0, the greater the tendency toward average control; conversely, the closer the setting is to 100, the greater the tendency toward peak control. A. IRIS MODENORM1 NORM2 CENTRUSER ENGFor selecting the auto iris mode. NORM1: The light is measured for the entire screen (except for the edges). NORM2: The light is measured for the entire screen (except for the top part). CENTR: The light is measured in the center area of the screen only. S. IRIS LEVEL 000 : 080 : 100 USER ENGFor setting the super iris target level. (Backlight compensation mode) IRIS GAIN CAM LENSUSER ENGFor setting whether the iris gain is to be adjusted by the camera or lens. IRIS GAIN VALUE01 : 06 : 10 USER ENGFor setting the iris gain adjustment value. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E LENS FILE screen The lens files are stored into the unit’s internal memory and read from the memory on this screen. The white shading data and flare adjustment data are stored together as a lens file. ItemVariable rangeRemarks READ WRITE==VF displayUSER ENGFor reading the lens files. FILE SELECT1 :8USER ENGFor selecting the number of the file to be read or written. RESET ALL==USER ENGFor returning all the data from lens files 1 to 8 to the factory setting. TITLE 1: - TITLE 8:¢¢¢¢¢¢ ¢¢¢¢¢¢USER ENGFor enabling titles each consisting of a maximum of 12 characters to be set for the files. SUFE ==USER ENGFor writing the lens files. ItemVariable rangeRemarks READ==VF displayUSER ENGFor reading lens files from the SD memory card. CARD FILE SELECT1: 8USER ENG For selecting the number of the file to be read from the SD memory card or written on the SD memory card. TITLE 1: - TITLE 8:¢¢¢¢¢¢ ¢¢¢¢¢¢USER ENGFor enabling titles each consisting of a maximum of 12 characters to be set for the files. SUFE LENS FILE (CARD R/W) screen The contents of the eight lens files recorded in the internal memory are written on the SD memory card on this screen. Alternatively, the lens files written on the SD memory card are read into the internal memory on this screen. When RESET ALL is executed, the white shading adjustment value and the flare setting value are reset to the factory default values.
109 Setting menu screens FILM (CAM) MAIN MENU 3 (continued) The underlining in the variable range column indicates the setting in the preset mode. LENS ADJ screen The lens adjustments are performed on this screen. ItemVariable rangeRemarks F2.8 ADJ ON OFF VF display ENG For outputting the voltage output only when ON is selected as this item’s setting. F16 ADJ ON OFFENG For outputting the voltage output only when ON is selected as this item’s setting. When using a lens which enables the open limit and close limit of the lens aperture to be adjusted, set “F2.8ADJ” or “F16ADJ” to ON, and repeatedly adjust so that the lens aperture will be set to “F2.8” or “F16.” (This adjustment need not be performed if the lens does not have this adjustment function.)
110 Setting menu screens FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT 1, 2 and 3 screens The settings for registering the items (the same as the ones on the FILM or CAM MAIN MENU 1, 2 and 3 screens) allocated to the SUB menus to the SUB MENU screen are performed on this screen. Registration ON (¢ ) or OFF (≥) is set at the head of each item. Up to 42 camera unit items can be registered. FILM (CAM) USER MENU SELECT 1 screen SUB menuVF displayRemarks ROPENG Index for opening the ROP screen. LOW SETTINGENG Index for opening the LOW SETTING screen. MID SETTINGENG Index for opening the MID SETTING screen. HIGH SETTINGENG Index for opening the HIGH SETTING screen. ADDITIONAL DTL1ENG Index for opening the ADDITIONAL DTL1 screen. ADDITIONAL DTL2ENG Index for opening the ADDITIONAL DTL2 screen. SKIN TONE DTLENG Index for opening the SKIN TONE DTL screen. KNEE/LEVELENG Index for opening the KNEE/LEVEL screen. GAMMAENG Index for opening the GAMMA screen. CAMERA SETTINGENG Index for opening the CAMERA SETTING screen. FILM (CAM) USER MENU SELECT 2 screen SUB menuVF displayRemarks VF DISPLAYENG Index for opening the VF DISPLAY screen. VF MARKERENG Index for opening the VF MARKER screen. VF INDICATORENG Index for opening the VF INDICATOR screen. !LEDENG Index for opening the !LED screen. CAMERA SW MODEENG Index for opening the CAMERA SW MODE screen. SUPER GAINENG Index for opening the SUPER GAIN screen. FRAME MODEENG Index for opening the FRAME MODE screen. FILM (CAM) USER MENU SELECT 3 screen SUB menuVF displayRemarks CAM CARD READ/WRITEENG Index for opening the CAM CARD READ/WRITE screen. CAM CARD R/W SELECTENG Index for opening the CARD R/W SELECT screen. GENLOCK/IRISENG Index for opening the GENLOCK/IRIS screen. LENS FILEENG Index for opening the LENS FILE screen. LENS FILE (CARD R/W)ENG Index for opening the LENS FILE (CARD R/W) screen.