Panasonic Camera Recorder Ajhdc27hp Operating Instructions
Have a look at the manual Panasonic Camera Recorder Ajhdc27hp Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
91 Setting menu configuration (continued) FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT1 FILM (CAM) USER MENU SELECT2 BLACK SHADING FLARE INITIALIZE DIAGNOSTIC OPTION ROPLOW SETTINGMID SETTINGHIGH SETTINGADDITIONAL DTL1ADDITIONAL DTL2SKIN TONE DTLKNEE/LEVELGAMMACAMERA SETTING VF DISPLAY VF MARKER VF INDICATOR!LEDCAMERA SW MODESUPER GAINFRAME MODE FILM (CAM) USER MENU SELECT3CAM CARD READ/WRITE CAM CARD R/W SELECT GENLOCK/IRIS DETECTION CORRECT (DIG) WHITE SHADINGDETECTION (V SAW) CORRECT R FLARE G FLARE B FLARE COLORIMETRYMATRIX READ FACTORY DATA WRITE USER DATA SCENE SEL READ WRITE RESETTITLE 1TITLE 2TITLE 3TITLE 4 CAMSOFT (IN) CAMSOFT (OUT) CAM TABLEPLD (CAM)PLD (SHD) SHD, ABB SW CTRLAWB AREAAWB & ABB OFFSETCAM MENU SELSYSTEM FREQ EVALUATION ENG SECURITY S/NS/N DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED MODULATIONMODULATION DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED RESOLUTIONRESOLUTION DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED SENSITIVITYSENSITIVITY KNEE W. CLIP M. PED LENS FILELENS FILE (CARD R/W) PLD (FM) EVF SEL SUPER DTL ItemVariable rangeRemarks MASTER PED (FILM MENU) (CAM MENU)–200 : +000 : +018 : +200 (Max.)VF display USER ENGMASTER PEDESTAL level setting. How to interpret the menu lists The following abbreviations indicate whether the menu changes are stored (written) in the corresponding data or loaded (read) from the data. The changes cannot be stored or loaded when “/” is indicated. S:The changes can be stored or loaded as scene file data. C:The changes can be stored or loaded using CARD READ/WRITE. U:The changes can be stored or loaded as user data. Refer to “INITIALIZE screen” (page 111). F:The changes can be stored or loaded as READ FACTORY DATA. Refer to “INITIALIZE screen” (page 111). E:The changes can be stored or loaded using ECU DATA SAVE. Refer to “Connecting the extension control unit” (page 41). This column indicates the variable range in which the item can be set and the choice of the settings which can be selected for the item. Described in this column are the operations which can be expected to result when the item’s settings are selected. USER:This appears on the user menu screen. ENG:This appears on the engineer menu screen. SCUF E
92 Setting menu configuration (continued) VTR MAIN MENU FUNCTION BATTERY/TAPE VTR VF INDICATOR MIC/AUDIO TIME/DATE NEWS REC MODE HUMID OPE REC STARTPAUSE TIMERRETAKE MODEINTERVAL REC MODEINTERVAL REC TIMEINTERVAL PAUSE TIMEECU REC CHK SWCHARACTER ON SDI BATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARMBATT NEAR END CANCELBATT END ALARMBATT REMAIN FULLTAPE NEAR END ALARMTAPE NEAR END TIMETAPE END ALARMTAPE REMAIN/$BATTERY SETTINGAJ-BP490 AU-BP402 HP-30APRO14TRIM14TRIM13DIGITAL14DIGITAL13BP-H90BP-H100NP-L40NP-L40 DBP-L60/90NP-1B TAPE (IND) BATTERY (IND) LEVEL METER (IND)AUDIO IN (IND)TC (IND)VTR WARNING (IND) SAVE LED FRONT MIC POWER MIC LOWCUT CH1 MIC LOWCUT CH2LIMITERTEST TONECUE SELECTEMBEDDED AUDIO (60 Hz) TC/UBTC MODE UB MODE TCG SET HOLDFIRST REC TCP.OFF LCD DISPLAYTC OUTVITC UB MODETC DISP SEL DIAGNOSTICOPERATION DRUM RUNNING THREADINGVTR SYSCONSERVOMECHACONFRONT YEAR MONTH DAYHOURMINUTE$ TIME/DATE SET VTR CARD READ/WRITEREAD WRITE READ USER DATA VTR INITIALIZEREAD FACTORY DATA WRITE VTR USER DATA VTR USER MENU SELECT FUNCTIONNEWS REC MODE HUMID OPE REC STARTPAUSE TIMERRETAKE MODEINTERVAL REC MODEINTERVAL REC TIMEINTERVAL PAUSE TIMEECU REC CHK SWCHARACTER ON SDI BATTERY/TAPEBATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARMBATT NEAR END CANCELBATT END ALARMBATT REMAIN FULLTAPE NEAR END ALARMTAPE NEAR END TIMETAPE END ALARMTAPE REMAIN/ $ VTR VF INDICATORTAPE (IND) BATTERY (IND) LEVEL METER (IND)AUDIO IN (IND)TC (IND)VTR WARNING (IND) SAVE LED MIC/AUDIOFRONT MIC POWER MIC LOWCUT CH1 MIC LOWCUT CH2LIMITERTEST TONECUE SELECTEMBEDDED AUDIO (60 Hz) TC/UBTC MODE UB MODE TCG SET HOLDFIRST REC TCP.OFF LCD DISPLAYTC OUTVITC UB MODETC DISP SEL MONITOR MARKERSAFETY ZONE CENTER MARK FRAME SIGMARK COMPRESSION (IND) A/V SYNCHROCOMPRESSION MODE COMPRESSION MODE MONITOR MARKER SAFETY ZONE CENTER MARK FRAME SIGMARK COMPRESSION (IND) A/V SYNCHRO SDI IF CODEC AUDIO
93 Setting menu screens FILM (CAM) MENUS The main menu consists of FILM (CAM) MAIN MENU (1 to 4) of the camera and the VTR MAIN MENU of the VTR. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the MENU button and JOG dial button. (Refer to pages 86 to 88 for the menu operations.) FILM (CAM) MAIN MENU 1 screen SUB menuVF displayRemarks ROPUSER ENGIndex for opening the ROP screen. MATRIXENG Index for opening the MATRIX screen. COLOR CORRECTION1ENG Index for opening the COLOR CORRECTION 1 screen. COLOR CORRECTION2ENG Index for opening the COLOR CORRECTION 2 screen. LOW SETTINGUSER ENGIndex for opening the LOW SETTING screen. MID SETTINGUSER ENGIndex for opening the MID SETTING screen. HIGH SETTINGUSER ENGIndex for opening the HIGH SETTING screen. ADDITIONAL DTL1USER ENGIndex for opening the ADDITIONAL DTL 1 screen. ADDITIONAL DTL2USER ENGIndex for opening the ADDITIONAL DTL 2 screen. SKIN TONE DTLUSER ENGIndex for opening the SKIN TONE DTL screen. KNEE/LEVELUSER ENGIndex for opening the KNEE/LEVEL screen. GAMMAUSER ENGIndex for opening the GAMMA screen. CAMERA SETTINGUSER ENGIndex for opening the CAMERA SETTING screen. FILM (CAM) MAIN MENU 2 screen SUB menuVF displayRemarks VF DISPLAYUSER ENGIndex for opening the VF DISPLAY screen. VF MARKERUSER ENGIndex for opening the VF MARKER screen. VF INDICATORUSER ENGIndex for opening the VF INDICATOR screen. CAMERA IDENG Index for opening the CAMERA ID screen. SHUTTER SPEEDENG Index for opening the SHUTTER SPEED screen. SHUTTER SELECTENG Index for opening the SHUTTER SELECT screen. FILM (CAM) MAIN MENU 2 screen SUB menuVF displayRemarks !LEDUSER ENGIndex for opening the !LED screen. CAMERA SW MODEUSER ENGIndex for opening the CAMERA SW MODE screen. SUPER GAINUSER ENGIndex for opening the SUPER GAIN screen. FRAME MODEUSER ENGIndex for opening the FRAME MODE screen. FILM (CAM) MAIN MENU 3 screen SUB menuVF displayRemarks CAM CARD READ/WRITEUSER ENGIndex for opening the CAM CARD READ/WRITE screen. CAM CARD R/W SELECTUSER ENGIndex for opening the CARD R/W SELECT screen. GENLOCK/IRISUSER ENGIndex for opening the GENLOCK/IRIS screen. LENS ADJENG Index for opening the LENS ADJ screen. FILM (CAM) MAIN MENU 4 screen SUB menuVF displayRemarks CAM USER MENU SELECT1ENG Index for opening the FILM (CAM) USER MENU SELECT 1 screen. CAM USER MENU SELECT2ENG Index for opening the FILM (CAM) USER MENU SELECT 2 screen. CAM USER MENU SELECT3ENG Index for opening the FILM (CAM) USER MENU SELECT 3 screen. BLACK SHADINGENG Index for opening the BLACK SHADING screen. WHITE SHADINGENG Index for opening the WHITE SHADING screen. FLAREENG Index for opening the FLARE screen. COLORIMETRYENG Index for opening the COLORIMETRY screen. INITIALIZEENG Index for opening the INITIALIZE screen. DIAGNOSTICENG Index for opening the DIAGNOSTIC screen. EVALUATIONENG Index for opening the EVALUATION screen. OPTIONENG Index for opening the OPTION screen.
94 Setting menu screens FILM (CAM) MAIN MENU 1 ROP screen The ROP (Remote Operation Panel) is set on this screen. ItemVariable rangeRemarks MASTER PED (FILM MENU) (CAM MENU)–200 : +000 : +018 : +200 (Max.)VF display USER ENGMASTER PEDESTAL level setting. MASTER DTL –31 : +00 : +31 USER ENGH. DTL/V. DTL level setting. MASTER GAMMA0.35 : 0.45 : 0.75 USER ENGMASTER GAMMA setting. (0.01 step) Three different values can be stored for LOW, MID and HIGH in the memory. R GAIN –200 : +000 : +200 (Max.)USER ENGFor setting R channel gain. G GAIN –200 : +000 : +200 (Max.)USER ENGFor setting G channel gain. B GAIN –200 : +000 : +200 (Max.)USER ENGFor setting B channel gain. R PEDESTAL –100 : +000 : +100 (Max.)USER ENGFor setting R channel PEDESTAL level. G PEDESTAL –100 : +000 : +100 (Max.)USER ENGFor setting G channel PEDESTAL level. B PEDESTAL –100 : +000 : +100 (Max.)USER ENGFor setting B channel PEDESTAL level. The underlining in the variable range column indicates the setting in the preset mode. MATRIX screen The camera matrix is set on this screen. ItemVariable rangeRemarks ∫MATRIX TABLEA B VF display ENG For selecting the color adjustment display. MATRIX R-G –31 : +00 : +31 ENG Color adjustment MATRIX R-B –31 : +00 : +31 ENG Color adjustment MATRIX G-R –31 : +00 : +31 ENG Color adjustment MATRIX G-B –31 : +00 : +31 ENG Color adjustment MATRIX B-R –31 : +00 : +31 ENG Color adjustment MATRIX B-G –31 : +00 : +31 ENG Color adjustment OThe white balance and black balance will not change even if the MATRIX is changed. OTwo tables, A and B, can be stored in the memory for the MATRIX TABLE item. O“00” applies for all the preset modes in MATRIX TABLE B. SCUF E SCUF E SCUF E SCUF SCUF E SCUF E SCUF E SCUF SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
95 Setting menu screens FILM (CAM) MAIN MENU 1(continued) COLOR CORRECTION 1 screen The camera color saturation adjustments and hue adjustments are set on this screen. ItemVariable rangeRemarks R (SAT) R (PHASE)–63 : +00 : +63 VF display ENG Color saturation adjustment and hue adjustment: red Mg (SAT) Mg (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: magenta B (SAT) B (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: blue Cy (SAT) Cy (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: cyan G (SAT) G (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: green Yl (SAT) Yl (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: yellow COLOR CORRECTION 2 screen The camera color saturation adjustments and hue adjustments are set on this screen. ItemVariable rangeRemarks R-Mg (SAT) R-Mg (PHASE)–63 : +00 : +63 VF display ENG Color saturation adjustment and hue adjustment: between red and magenta Mg-B (SAT) Mg-B (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between magenta and blue B-Cy (SAT) B-Cy (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between blue and cyan Cy-G (SAT) Cy-G (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between cyan and green G-Yl (SAT) G-Yl (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between green and yellow Yl-R (SAT) Yl-R (PHASE)–63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between yellow and red The underlining in the variable range column indicates the setting in the preset mode. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
96 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) LOW SETTING screen The low level gain is set on this screen. ItemVariable rangeRemarks ∫MASTER GAIN (FILM MENU)–3dB : 0dB : 30dB VF display USER ENG–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. H. DTL LEVEL (FILM MENU) (CAM MENU)00 : 08 : 12 : 63 USER ENGFor setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU)00 : 12 : 16 : 31 USER ENGFor setting V.DTL (detail) level. H. DTL LEVEL (FILM MENU) (CAM MENU)00 : 08 : 12 : 63 USER ENGFor setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU)00 : 12 : 16 : 31 USER ENGFor setting V.DTL (detail) level. DTL CORING 00 : 02 : 15 USER ENGFor setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENGFor selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 2 : 5 USER ENGFor setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA0.35 : 0.45 : 0.75 USER ENGMaster gamma setting. (0.01 step) BLACK STRETCH+3, +2, +1, OFF, –1, –2, –3USER ENGFor correcting the black level gradation.BLACK STRETCH+3, +2, +1, OFF, –1, –2, –3USER ENGFor correcting the black level gradation. ∫MATRIX TABLEA B OFFUSER ENGFor selecting the color correction matrix table. ∫COLOR CORRECTON OFFUSER ENGFor setting the 12-axis independent color correction to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. MID SETTING screen The middle level gain is set on this screen. ItemVariable rangeRemarks ∫MASTER GAIN (FILM MENU)–3dB : 3dB : 30dB VF display USER ENG–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. (CAM MENU) –6dB : 6dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set.(CAM MENU) –6dB : 0dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. DTL CORING 00 : 02 : 15 USER ENGFor setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENGFor selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 2 : 5 USER ENGFor setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA0.35 : 0.45 : 0.75 USER ENGMaster gamma setting. (0.01 step) ∫MATRIX TABLEA B OFFUSER ENGFor selecting the color correction matrix table. ∫COLOR CORRECTON OFFUSER ENGFor setting the 12-axis independent color correction to ON or OFF. SCUF ESCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
97 HIGH SETTING screen The high level gain is set on this screen. ItemVariable rangeRemarks ∫MASTER GAIN (FILM MENU)–3dB : 6dB : 30dB VF display USER ENG–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. (CAM MENU) –6dB : 12dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. DTL CORING 00 : 05 : 15 USER ENGFor setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENGFor selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 5USER ENGFor setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA0.35 : 0.45 : 0.75 USER ENGMaster gamma setting. (0.01 step) ∫MATRIX TABLEA B OFFUSER ENGFor selecting the color correction matrix table. ∫COLOR CORRECTON OFFUSER ENGFor setting the 12-axis independent color correction to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 1 (continued) ∫ ADDITIONAL DTL 1 screen The special detail features of the camera are set on this screen. ItemVariable rangeRemarks KNEE APERTUREON OFF VF display USER ENGFor setting the knee aperture to ON or OFF. At the “ON” setting, the detail above the knee point is boosted. SLIM DTL ON OFFUSER ENGFor setting the mode to make the detail finer to ON or OFF. ADDITIONAL DTL2 screen The special detail features of the camera are set on this screen. ItemVariable rangeRemarks KNEE APE LVL 0 : 5 VF display USER ENGFor changing the detail level in the high- brightness areas. DTL GAIN (+) –31 : +00 : +31 USER ENGFor changing the H detail level in the “+” direction. DTL GAIN (–) –31 : +00 : +31 USER ENGFor changing the H detail level in the “–” (bottom) direction. DTL CLIP 00 : 47 : 63 USER ENGFor changing the clipping level of the detail signal. DTL SOURCE (G+B)/2 (R+G)/2 (2G+R+B)/4 (3G+R)/4 R G USER ENGFor setting the ratio between the RGB signal components which generate the detail signal. V DTL FREQ. 360TV 450TV 540TV 630TV 720TV USER ENGFor setting the V. DTL FREQUENCY. BLACK STRETCH+3, +2, +1, OFF, –1, –2, –3USER ENGFor correcting the black level gradation. H. DTL LEVEL (FILM MENU) (CAM MENU)00 : 08 : 12 : 63 USER ENGFor setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU)00 : 12 : 16 : 31 USER ENGFor setting V.DTL (detail) level. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF SCUF
98 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) SKIN TONE DTL screen The skin tone detail of the camera is set on this screen. ItemVariable rangeRemarks ∫SKIN TONE DTLON OFF VF display USER ENGFor setting the skin tone detail to ON or OFF. ∫SKIN TONE ZEBRAON OFFUSER ENGFor setting zebra in the skin tone range to ON or OFF. At the “ON” setting, the amount of detail in the zebra viewing range is varied. SKIN DTL CORING0 : 5 : 7 USER ENGFor setting detail signal noise removal level. Y MAX 000 : 190 : 255 ENG For setting the maximum luminance level at which the detail is boosted. Y MIN 000 : 010 : 255 ENG For setting the minimum luminance level at which the detail is boosted. I CENTER 000 : 055 : 255 ENG For setting the medium I- axis level at which the detail is boosted. I WIDTH 000 : 090 : 255 ENG For setting the minimum I- axis level at which the detail is boosted. Q WIDTH 000 : 010 : 255 ENG For setting the maximum Q-axis level at which the detail is boosted. Q PHASE –31 : +00 : +31 ENG For setting the minimum Q-axis level at which the detail is boosted. The underlining in the variable range column indicates the setting in the preset mode. KNEE/LEVEL screen The knee settings of the camera are performed on this screen. ItemVariable rangeRemarks MASTER PED (FILM MENU) (CAM MENU)–200 : +000 : +018 : +200 VF display USER ENGFor setting the master pedestal level (MASTER PED). ∫MANUAL KNEEON OFFUSER ENGFor setting the mode when the AUTO KNEE switch is at OFF. KNEE POINT (FILM MENU)30% : 65% : 90% USER ENGFor setting the manual knee point position. This setting is canceled when FILM REC has been selected as the CINE GAMMA SEL item setting on the GAMMA screen. (CAM MENU) 80.00% : 95.00% : 107.00% KNEE SLOPE (FILM MENU)150% : 500% : 600% USER ENGFor setting the manual knee slope. This setting is canceled when FILM REC has been selected as the CINE GAMMA SEL item setting on the GAMMA screen. (CAM MENU) 00 : 50 : 99 ∫WHITE CLIPON OFFUSER ENGFor setting white clipping to ON or OFF. WHITE CLIP LVL 090% : 109%USER ENGFor setting the white clipping level. A. KNEE POINT (CAM MENU) (FILM MENU)80.00% : 95.00% : 100.00% : 107.00% USER ENGFor setting the auto knee point position. The gamma characteristics are set using the KNEE POINT and KNEE SLOPE items when VIDEO REC was selected as the CINE GAMMA SEL item setting on the GAMMA screen. A. KNEE LVL 100 : 108 109 USER ENGFor setting the maximum auto knee level. A. KNEE RESPONSE1 2 3 4 USER ENGFor setting the AUTO KNEE response rate. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
99 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) The underlining in the variable range column indicates the setting in the preset mode. GAMMA screen The gamma settings of the camera are performed on this screen. ItemVariable rangeRemarks R GAMMA (CAM MENU)–15 : +00 : +15 VF display USER ENGAmount by which the R channel gamma is corrected in respect of the master gamma level. MASTER GAMMA (FILM MENU)0.35 : 0.45 : 0.75 USER ENGFor setting the master gamma when the unit is to be operated in the film mode. B GAMMA (CAM MENU)–15 : +00 : +15 USER ENGAmount by which the B channel gamma is corrected in respect of the master gamma level. CINE GAMMA SEL (FILM MENU)FILM RECVIDEO RECUSER ENGFor setting the gamma characteristics when the unit is to be operated in the film mode. FILM REC: The cine gamma characteristics for films are used. VIDEO REC: The cine gamma characteristics for video are used. BLACK STR. LVL (FILM MENU)00%: 30%USER ENGFor setting the black strech level point position. OThis setting is valid when FILM REC has been selected as the CINE GAMMA SEL item setting. OThe KNEE POINT and KNEE SLOPE item settings on the KNEE/LEVEL screen are canceled. DYNAMIC LVL (FILM MENU)200% 300% 400% 500%USER ENGFor setting the dynamic range. OThis setting is valid when FILM REC has been selected as the CINE GAMMA SEL item setting. OThe KNEE POINT and KNEE SLOPE item settings on the KNEE/LEVEL screen are canceled. The gamma characteristics are set using the BLACK STR. LVL and DYNAMIC LVL items when FILM REC has been selected as the CINE GAMMA SEL item setting. ∫ CAMERA SETTING screen The basic settings of the camera are set to ON or OFF on this screen. ItemVariable rangeRemarks DETAILON OFF VF display USER ENGFor setting the detail (H, V) to ON or OFF. (Both the H detail and V detail are simultaneously set to either ON or OFF.) HIGH COLOR ON OFFUSER ENGFor setting the mode for expanding the dynamic range of the colors to ON or OFF. At the ON setting, the colors above the knee point are boosted. GAMMAON OFFUSER ENGFor setting the gamma correction to ON or OFF. TEST SAW ON OFFUSER ENGFor setting the test signal to ON or OFF. FLAREON OFFUSER ENGFor setting the flare compensation to ON or OFF. H-F COMPEON OFFUSER ENGFor setting the high-range frequency compensation mode to ON or OFF. D5600 K (CAM MENU)ON OFFUSER ENGFor setting the 5600 K presetting for the white balance to ON or OFF. The black balance must always be adjusted (see page 56) when this item’s setting has been changed. LIGHTING (FILM MENU)TUNGSTENDAY LIGHTUSER ENGFor switching the white balance preset value to the tungsten lighting type or daylight type. SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E
100 SPOT OFF ON 109% 0% ZEBRA 2 DETECTZEBRA 2 ZEBRA 1 DETECT VF DISPLAY screen The information to be displayed inside the viewfinder is set on this screen. ItemVariable rangeRemarks DISP CONDITIONNORMAL HOLD VF display USER ENGNORMAL: The statuses are displayed at all times. HOLD: The statuses are displayed when MODE CHECK SW is ON. DISP MODE 1 2 3USER ENG VF OUTY NAM R G BUSER ENGFor selecting VF OUT. NAM (N Additive Mix): The signal with the highest level among the R, G and B signals is output. VF DTL 0 : 4 5 USER ENGFor selecting VF DTL. The detail of the signals for VF is further boosted. At the “0” setting, the detail is the same as the unit’s. ZEBRA1 DETECT (CAM MENU) (FILM MENU)000% : 070% : 080% : 109% USER ENGFor setting the ZEBRA1 detection level (IRE level). ZEBRA2 DETECT000% : 085% : 109% USER ENGFor setting the ZEBRA2 detection level (IRE level). ZEBRA2 ON OFF SPOTUSER ENGFor setting ZEBRA2 to ON or OFF and selecting SPOT. See “Zebra pattern display.” When used at the “SPOT” setting, ensure that the ZEBRA2 DETECT value is set higher than the ZEBRA1 DETECT value. If the ZEBRA2 DETECT value is lower than the ZEBRA1 DETECT value, the ZEBRA display will not appear. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 ChangeDisplay 123 tt± FILTER tt±GAIN tt±AWB t±±AUTO KNEE SW t±±SHUTTER t±±ABB STATUS t±±AWB STATUS ItemVariable rangeRemarksVF display LOW LIGHT LVL (FILM MENU) (CAM MENU)OFF 20% 25% : 40% 45% USER ENGFor selecting the light level for the LOW LIGHT display when the amount of light entering the camera is too low. SYNCHRO SCAN DISP. (CAM MENU) (FILM MENU)sec % deg USER ENGFor setting the unit in which the synchro scan mode is to be displayed. ECU MENU DISP.ON OFF USER ENGFor setting whether the menu screen is to be displayed when menu operations are performed using the AJ-EC3 Extension Control Unit. Zebra pattern display Video level SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E SCUF E