Panasonic Broadband Networking Gateway Kx Hgw200 Operating Instructions

							Installation
21For assistance, please call: 1-800-272-7033
Ò
4
Select TCP/IPthat is associated with your network card and click
[Properties]in the Networkdialog box.
5
Click the IP Addresstab in the TCP/IP Propertiesdialog box.
Please make note for future
reference
.Memo1(See p. 32)
If Obtain an IP address
automatically is selected,
check the DHCP.
·DHCP
If the data field has already
been filled, record the
parameters first.
.Memo2(See p. 32)
Record the IP Addresshere:
.Memo3(See p. 32)
Record the Subnet Mask
here:
(Continued Ò)
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  21 
						

							22
ÒConfiguring the Computer
6
Select Obtain an IP address automatically.
7
Click Gatewaytab.
8
Make sure nothing is entered into the Installed gatewaysdata
setting field. If any numbers or characters appear, record them,
then remove them.
To remove them, select the numbers or characters, and then click
[Remove].
Installed
gateways data
setting field
Click [Remove]
when an address is
selected.
Please make note for future
reference
.Memo4(See p. 32)
If the data field has already
been filled, record the
parameters first. 
Record the Installed 
gatewayshere:
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  22 
						

							Installation
23For assistance, please call: 1-800-272-7033
Ò
9
Click the DNS Configurationtab.
10
Select Disable DNS.
11
Click [OK].
The Networkdialog box appears.
Please make note for future
reference
.Memo5(See p. 32)
If the data field has already
been filled, record the
parameters first. 
Record the DNS here.
Domain:
DNS server:
(Continued Ò)
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  23 
						

							24
ÒConfiguring the Computer
12
Click Identificationtab.
13
Enter the name of the computer into the Computer namedata
field.
14
Click [OK].
The System Settings Changedialog box appears.
15
Click [Yes]and restart the computer.
Your computer will be able to obtain an IP address from the 
KX-HGW200.
³The setup of the computer has been completed. Set up the
other computers in the home network in the same manner.
Information:
To confirm the setup of the KX-HGW200, see “Confirmation of the
Setup” on p. 27 – 29.
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  24 
						

							Installation
25For assistance, please call: 1-800-272-7033
Ò
Setup of a Macintosh®Computer
The steps below are for Mac®OS 9.0 operating system software.
1
Turn on the computer.
2
From the Apple menu, select Control Panels and TCP/IP.
3
Select Ethernetfrom the Connect viapop-up menu.
Please make note for
future reference
.Memo1(See p. 32)
If Using DHCP Server is
selected, check the DHCP.
·DHCP
If the data field has already
been filled, record the
parameters first.
.Memo2(See p. 32)
Record the IP Address
here:
.Memo3(See p. 32)
Record the Subnet mask
here:
.Memo4(See p. 32)
Record the Router 
addresshere:
.Memo5(See p. 32)
Record the DNS here:
Search domains:
Name server addr.:
Connect via
pop-up menu
(Continued Ò)
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  25 
						

							26
ÒConfiguring the Computer
4
Select Using DHCP Serverfrom the Configurepop-up menu.
5
Click the close button.
The dialog box below appears.
6
Click [Save].
Your computer will be able to obtain an IP address from the
KX-HGW200.
³The setup of the computer has been completed. Set up the
other computers in the home network in the same manner.
Information:
To confirm the setup of the KX-HGW200, see “Confirmation of
the Setup” on p. 27 – 29.
Close button
Configure
pop-up menu
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  26 
						

							Installation
27For assistance, please call: 1-800-272-7033
Information:
You can change the password on the KX-HGW200 administration web
screen. See p. 38 for more detailed information.
Confirmation of the SetupÒ
Confirmation of the Home Network Setup
The KX-HGW200 has a built-in http server function. If you can access its
home page screen, the connection between the KX-HGW200 and the
computer in the home network has been successfully made.
Follow the steps below and confirm the setup of the computers in the home
network.
1
On the computer, start up your web browser.
2
Enter “http://192.168.0.254” in the address field (URL line) of your web
browser.
3
The User Name/ID and Password dialog box appears. Leave User
Name/ID data field blank.
4
Type “KX-HGW” for the password.
For Windows For Macintosh
If the dialog box does not appear:
1: Make sure “http://192.168.0.254” has been correctly entered into the
address field (URL line).
2: Make sure the connections between the computer and the 
KX-HGW200 have been successfully made.
3: Make sure that the computers, the KX-HGW200 and other devices in
the home network have been turned on in the proper order. See
“Turning on the Devices” on p. 19 for more detailed information.
When you use the proxy server setting:
Setup of your web browser may be needed to access the KX-HGW200
administration web screen. See p. 47 – 50 and check your setting.
(Continued Ò)
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  27 
						

							28
ÒConfirmation of the Setup
5
Click 
[OK].
The home page screen on the KX-HGW200 appears.
³The home network setup is completed.
If the above screen does not appear:
Reenter the password “KX-HGW” in the password field.
Information:
For more details about the web screens, see “About the KX-HGW200
Administration Web Screen” on p. 30.
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  28 
						

							Installation
29For assistance, please call: 1-800-272-7033
Internet Configuration and Confirmation
Internet Configuration
Some carriers or ISPs (Internet Service Providers) require you to enter the
parameters for your Internet connection. These parameters should be
collected and noted using the following Quick Prep Sheet or by using the
steps on pages 20 – 26. In this case, set the parameters to the KX-HGW200
first, and then confirm the setup. The parameters can be entered in the
Basic Setup web screen of the KX-HGW200. Follow the steps below (1-4)
and enter the parameters.
1: Access the KX-HGW200 administration web screen following the steps
on p. 27 and 28.
2: Make the Basic Setup screen appear by clicking the [Basic\Setup]on
the KX-HGW200 administration top page.
3: Enter the parameters following the steps on p. 31.
4: When you have finished, restart the computers.
Confirmation
After you have confirmed the connection between the computer and the
KX-HGW200, and set up your Internet connection parameters, confirmation
of the connection between the Internet and the KX-HGW200 is needed. 
If you can access a WWW (World Wide Web) site, your home network has
been successfully linked to the Internet. 
1
On the computer, start up your web browser.
2
Enter the address of a web site in the address field (URL line) of your
web browser and press the Enter key on your computer.
A WWW site appears.
If a web site does not appear:
1: Make sure the address of the web site has been correctly entered in
the address field (URL line) of the web browser.
2: Make sure that “Confirmation of the Home Network Setup” on p. 27
is successfully made.
3: Make sure the connection between the KX-HGW200 and the
cable/xDSL modem is successfully made.
4: Make sure that the computers, the KX-HGW200, cable/xDSL
modem and other devices in the home network have been turned
on in proper order. See “Turning on the Devices” on p. 19 for more
detailed information.
5: Confirm the information on your Internet connection provided by
your ISP. If you are required to enter some parameters, see “Basic
Setup” on p. 31 and set the parameters to the KX-HGW200.
PQQX12817ZA \1-P29  01.3.8 3:18 PM  y[W  29 
						

							30
About the KX-HGW200 Administration Web Screen
Configuration:
1Basic Setup: Allows you to set the basic parameters used to access the
Internet
2Additional Setup: Allows you to set up the home network and set the additional
parameters used to access the Internet
System Commands:
3Ping: Allows you to confirm if a device with an IP address is
successfully linked to your KX-HGW200
4Restart: Allows you to restart the KX-HGW200 with all the parameters
preserved
5Clear Setting: Allows you to initialize the KX-HGW200, resetting all the
parameters
6Change Password: Allows you to change the password to access the 
KX-HGW200 administration web screen
7Firmware Upgrade*: Allows you to upgrade the KX-HGW200 software
8PPPoE Connection: Allows you to manually initiate/stop your PPPoE connection
Information:
9Status: Allows you to view the status of the KX-HGW200
:Usage Data: Allows you to view the statistics of the KX-HGW200
;User Registration*: Allows you to connect to the web site for your registration