Panasonic Bluray Disc Home Theater Sound System Sc Btt750 Operating Instructions

							Advanced operations
Optional speaker settings
41
VQT2W18
Optional speaker  settings
Speaker installation 
option
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached 
should be capable of supporting 10 k g (22 lbs) per screw. 
Consult a qualified building contractor when attaching the 
speakers to a wall. Improper attachment may result in 
damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using 
methods other than those described in this manual.
1Drive a screw (not supp lied) into the wall.
2Fit the speaker securely onto the screw(s) 
with the hole(s).
[BTT750]
Front speaker
Attach to a wall without the base and the stand.
[BTT750]:
Surround speaker
[BTT350] :
Front speaker and
Surround speaker
F 97 mm (3 
13/16q)
G 210 mm to 212 mm (8 9/32q to 8 11/32q)
H 26 mm (1 1/32q) [BTT750]
Center speaker
[BTT350]
Center speaker
I
117 mm (4 
19/32q)
J 209 mm to 211 mm (8 7/32q to 8 5/16q)
K 97 mm (3 13/16q)
L 18.8 mm (3/4q)
M 17 mm (21/32q)
N 99 mm to 101 mm (3 29/32q to 3 31/32q)
∫ To avoid speaker dropping
[BTT750] : Front speaker, Center speaker
e.g.,  [BTT750]  Front speaker
≥ Consult a qualified building contractor to avoid damage to 
the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm (
3/32q), which is capable of 
supporting over 10 k g (22 lbs).
Attaching to a wall
e.g., [BTT750]  Front speaker
DO NOT DO
≥ In this position, the 
speaker will likely fall if 
moved to the left or right. ≥
Move the speaker so 
that the screw is in this 
position.

 

A
At least 30 mm (1 3/16q)
B ‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to ‰ 9.4 mm 
(9/32q to 3/8q)D Wall or pillar
E
5.5 mm to 7.5 mm (7/32q to 5/16q)

\b

 
\f





A String (not supplied)
B Screw eye (not supplied)
C Less than 10 cm (3 
15/16q)
D Rear of the speaker
SC-BTT750_350P_VQT2W18_eng.book  41 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							42
VQT2W18
Reference
Troubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥ Image disturbance during search.
≥ Image disturbance when replacing 3D discs.
∫ Unit does not respond to the remote control 
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 5 seconds.
jIf still unable to power the unit off, disconnect the power cord,  wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [SKIP 9] on the remote 
control and [  39)
To return all settings to the factory preset
≥Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [ 21)
≥ It may be necessary to set the code of the remote control 
again after changing the batteries for the remote control. 
(> 21)
Disc cannot be played.
≥The disc is dirty. ( >9)
≥Check the region code.
Still pictures (JPEG) do not playback normally.
≥The images that were edited on the PC, such as Progressive 
JPEG, etc., may not playback.
The TV tuner mode is not displayed when the TV is 
switched on.
≥This phenomenon may occur, depending on the TV setting, 
when “Quick Start” is set to “On”.
≥ Depending on the TV, this phenomenon may be prevented 
by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a 
source, press and hold [SKIP :] on the remote control and 
[1 ] (Play) on the unit at the same time for more than 5 
seconds. The ratings level returns to the factory preset.
No power.
≥ Insert the AC power supply cord securely into a household 
AC outlet. ( >18)
The unit switches to standby mode.
≥This unit will automatically turn to standby mode after 30 
minutes if it is inactive. ( >7)
≥ When the time set for the sleep timer has passed, the power 
will be turned off. ( >6)
≥ One of the unit’s safety devices is activated. Press 
[POWER Í/I] on the main unit to turn the unit on.
Power of this unit is turned off when the input for the TV is 
changed.
≥This is a normal phenomenon when using VIERA Link 
(HDAVI Control 4 or later). For details please read the 
operating instructions for the TV.
The display is dim.
≥ Change “FL Display” in the Setup menu. ( >37)
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥ An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a 
source, press and hold [ 1] (Play) and [∫] (Stop) on the main 
unit at the same time for more than 5 seconds to cancel the 
setting.
≥ When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio 
are not output in bitstream, select “Yes” in “Restore Default 
Settings” and make proper settings. ( >39)
≥ When “Playback Method for 3D Disc” in the Setup menu is 
set to “3D Playback”, images may not output depending on 
the connection method. Remove the disc from this unit and 
select “2D Playback”. (> 36)
Video is not output.
≥Set the “High Clarity Sound” in the Playback menu to “Off” to 
use the VIDEO OUT terminal. ( >35)
Video is not output in high-definition.
≥Confirm that “HDMI Resolution” in the Setup menu is set 
properly. ( >38)
Do you have the latest firmware installed?
Firmware updates may be released to correct operating 
irregularities that are discovered with certain movies. 
(> 20)
4
Make the following checks and visit our 
website for more information.
http://www2.panasonic.com/consumer-electronics/support/
Enter the model number. 4
Even so, you still have trouble,
Visit our website to find a service center.You can find a service center near you easily on our 
website.
Other support information:
“Customer Services Directory (United States and Puerto 
Rico)” ( >51)
General operation
Power
Displays
TV screen and video
SC-BTT750_350P_VQT2W18_eng.book  42 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Reference
43
VQT2W18
3D video is not output.
≥Are the settings on this unit and the TV correct? ( >26)
3D video is not output correctly as 2D.
≥Is the “Playback Method for 3D Disc” set to “2D Playback”? 
(> 36)
≥ Discs that have recorded titles with Side by side (2 screen 
structure) which can be enjoyed in 3D are played back in 
accordance with the settings of the TV.
No subtitles.
≥When progressive output is on, closed captions/subtitles 
cannot be displayed.
The subtitles overlap closed captions recorded on discs.
≥Turn off the subtitles or turn off the closed caption setting on 
the TV.  (> 34)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
≥Confirm the “TV Aspect” is set properly. ( >37)
≥ Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 25) on the unit is also 
possible.)
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥ Check connections to speak ers and other equipment. (>10, 
11 , 1 3 s18)
≥ Ensure the speaker settings  for your speakers are correct. 
(> 40)
≥
To output audio from a device connected with an HDMI cable, 
set “HDMI Audio Output” to “On” in the Setup menu. (>38)≥ When “BD-Video Secondary Audio” is set to “On”, Dolby 
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and 
DTS-HD High Resolution Audio are output as Dolby Digital or 
DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output 
from the HDMI AV OUT terminal. ( >35)
≥ Depending on the connected equipment, the sound may be 
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV 
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect 
the device to this unit’s “OPTICAL” terminal. ( >15, 29)
No surround sound.
≥Press [SURROUND] to select a surround effect. (> 23)
≥ (When using the 7.1ch speaker system)
Audio is not available from  the surround back speakers even 
though Dolby Pro Logic II turns on.
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set 
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to 
“PCM”. ( >37)
No sound from the TV.
≥Press [EXT-IN] to select the corresponding source. ( >22)
≥ The ARC (Audio Return Channel)  function is not available. 
Instead, use an optical digital audio cable or an audio cable 
to have the TV sound. ( >14, 15)
≥ If the TV is not ARC compatible and only the HDMI 
connection is used, an extra audio connection is necessary 
(> 14, 15). Cannot charge or operate.
≥
Check that the iPod/iPhone is connected firmly. ( >32)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
Cannot display iPod/iPhone videos/photos on the TV.
≥Make sure that TV is connected to the VIDEO OUT terminal 
on this unit. ( >14)
≥ Operate the iPod/iPhone menu to make the appropriate 
video/photo output settings for your TV. (Refer to operating 
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI 
input.
≥When the main unit is connected with an “HDAVI Control” 
compatible TV and VIDEO IN is selected for iPod/iPhone 
video or photo playback, the TV input channel will 
automatically change to the HDMI input channel when 
[START] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. ( >13)
A beat sound is heard.
≥Try to keep a certain amount of distance between the 
antenna and the TV.
I can’t connect to the network.
≥ Confirm the network connection and settings. ( >16, 39)
≥ Check the operating instructions for each device and 
connect accordingly.
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or 
DVD-Video region number, and is not defective. ( >8)
≥ You have set a ratings level to limit BD-Video or DVD-Video 
play. Change this setting. ( >36)
≥ Some BD-Video can only be output with HDMI.
I cannot play back BD-Live.
≥The SD card is write-protected. ( >9)
≥ Confirm that this unit is connected to the broadband Internet. 
(> 16)
≥ Confirm the “BD-Live Internet Access” settings. ( >36)
≥ Confirm an SD Card is inserted into the SD Card slot. (> 21)
Alternative soundtrack and subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the 
soundtrack and subtitles on some discs. Use the disc’s 
menus to make changes. ( >24)
Angle cannot be changed.
≥Angles can only be changed during scenes where different 
angles are recorded.
Sound
iPod/iPhone operation
Radio
Network
Other difficulties with playback
SC-BTT750_350P_VQT2W18_eng.book  43 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							44
VQT2W18
Messages
The following messages or service numbers appear on the 
television or unit’s display when something unusual is detected 
during startup and use.
Cannot play.
≥You inserted an incompatible disc. (Discs recorded in PAL 
video, etc.)
Cannot display on this unit.
≥You tried to play a non-compatible image.
No disc is inserted.
≥The disc may be upside down.
$  This operation is not available.
≥ Some operations are unsupported by the unit. For example;
jBD-Video: During playback, reverse slow-motion or 
reverse frame-by-frame is not possible.
IP address is not set.
≥The “IP Address” in “IP Address / DNS Settings” is “---. ---. 
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default 
Gateway”. (Select the automatic address acquisition if 
necessary.)
No Video
≥Depending on the connected iPod/iPhone, video menu may 
not be available on the TV. Select “ALL” on the unit’s display 
and operate video playback from your iPod/iPhone menu. 
(> 32)
F99
≥ The unit fails to operate properly. Press [POWER Í/I] on the 
main unit to switch the unit to standby for 3 seconds. Now 
press [POWER Í/I] on the main unit again to turn the unit 
on.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for 
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the 
unit. Do not block the ventilation hole on the rear and side of 
the unit.
U72
U73
≥The HDMI connection acts unusually.
jTurn the unit and TV off.
j Disconnect the HDMI cable between the player and the 
TV.
HDMI ONLY
≥Some BD-Video discs can only be output with HDMI.
NET
≥Displays while VIERA CAST is starting up.
No PLAY
≥There is a viewing restriction on a BD-Video or DVD-Video. 
(> 36)
No READ
≥The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
≥The unit is carrying out an internal process.This is not a 
malfunction. You cannot operate the unit while “PLEASE 
WAIT” is displayed.
SET  
(“   ” stands for a number.)
≥ The remote control and main unit are using different codes. 
Change the code on the remote control. ( >21)
H or F
(“   ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
≥ Check the unit using the troubleshooting guide. If the service 
number does not disappear, do the following.
1 Disconnect the plug from the household AC outlet, wait a 
few seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the 
above, request service from the dealer. Inform the dealer of 
the service number when requesting service.
UPD /
(“   ” stands for a number.)
≥ The firmware is being updated. Please do not turn off power.
IPOD OVER CURRENT ERROR
≥The iPod/iPhone is drawing too much power. Remove the 
iPod/iPhone, and turn the unit off and on again.
START
≥The system is being restarted during the firmware update. 
Please do not turn off power.
FINISH
≥The firmware update is completed.
NOT CONDITIONAL
≥The requested operation cannot be conducted.
On the television
On the unit’s display
SC-BTT750_350P_VQT2W18_eng.book  44 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Reference
45
VQT2W18
About MP3/JPEG/
AVCHD/MPEG2 files
* Design rule for Camera File system: unified standard established by Japan Electronics and Information 
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.
	
≥ With certain recording states and folder structures, the play order may 
differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for 
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
This unit is not compatible with packet writing.
You can play files on this unit by structure of folders as 
shown below. However depending on the method of 
writing data (writing software), play may not be in the 
order you numbered the folders.
 Folder which can be displayed with this unit
¢¢¢ : Numbers
XXX: Letters
*1 ¢¢¢: from 001 to 999
*2 ¢¢¢: from 100 to 999
XXXXX: 5 figures
*3 ¢¢¢¢ : from 0001 to 9999
XXXX: 4 figures
MP3
File format MP3
Extension Files must have the extension “.mp3” or 
“.MP3”.
Compression 
rate 32 kbps to 320 kbps
Sampling rate 44.1 kHz/48 kHz
Reference ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
JPEG
File format JPEG
ExtensionFiles must have the extension “.jpg” or 
“.JPG”.
Picture 
resolution between 34
k34 and 8192 k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference JPEG conforming DCF* is supported.
≥MOTION JPEG and Progressive JPEG is 
not supported
AV C H D
File format AVCHD format (V1.0) used on High 
Definition Video Camera
(Panasonic and some others)
Codec MPEG-4 AVC/H.264
≥ Discs must conform to UDF 2.5.
MPEG2
File format SD-Video format * used on Standard 
Definition Video Camera
(Panasonic and some others)
Codec MPEG2
* SD-Video Entertainment Video Profile
Structure of folders that can be 
played in this unit
Structures of still picture (JPEG) folders 
in DVD-R *
4/DVD-R DL *4/CD-R*5/CD-RW*5
Files inside a folder are displayed in the order they were 
updated or taken.
in BD-RE *
6/DVD-RAM *4
≥Folder structure is not displayed.
in SD card *
4
Displays JPEG files in all folders.
≥Folder structure is not displayed.
P0000010.jpgP0000011.jpgP0000012.jpg
P0000003.jpgP0000004.jpgP0000005.jpg
P0000001.jpgP0000002.jpg
P0000006.jpgP0000007.jpgP0000008.jpgP0000009.jpg
Root
Folder A
Folder B
Folder C e.g.,
DCIM
JPEG
XXXX.jpg
P0000001.jpgP0000002.jpg
XXXXX
XXXXXDCIM
XXXX.jpg
*1
*2*3
*3
*2
Root
e.g.,
XXXX.jpg
P0000001.jpg
DCIM
P0000003.jpgP0000004.jpg
XXXXX
P0000002.jpg
*3
*2
Root
Folder A e.g.,
SC-BTT750_350P_VQT2W18_eng.book  45 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							46
VQT2W18
*4 The total combined maximum number of recognizable picture contents and folders: 3000 picture contents and 300 folders.
*5 The total combined maximum number of recognizable picture contents  and folders: 999 picture contents and 99 folders.
*6 The total combined maximum number of recognizable picture contents  and folders: 9999 picture contents and 300 folders.
Supplemental 
information
∫Display languages list
∫ Video attribute
∫ Audio attribute
∫ Language code list
Structure of MP3 folders
in DVD-R/DVD-R DL/CD-R/CD-RW
Prefix the file names with 3-digit numbers in the order you 
want to play them.
001 
010XXXX.mp3011XXXX.mp3012XXXX.mp3
003XXXX.mp3004XXXX.mp3005XXXX.mp3
006XXXX.mp3007XXXX.mp3008XXXX.mp3009XXXX.mp3
001XXXX.mp3002XXXX.mp3
Root
Folder A
Folder B
Folder C e.g.,
DisplayLanguageDisplayLanguageDisplayLanguage
DisplayMeaning
MPEG-2/MPEG-4 AVC/VC-1Video recording method
DisplayMeaning
LPCM/ Digital/ Digital+/
TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
Signal type
ch (channel) Number of channels
k (kHz)Sampling frequency
b (bit) Number of bits
LanguageCodeLanguageCodeLanguageCode
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUSEnglish
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian ARA  
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR 
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
FinnishArabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Abkhazian 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic
:6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185 Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
SC-BTT750_350P_VQT2W18_eng.book  46 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Reference
47
VQT2W18
Glossary
AVCHD
AVCHD is a new format (standard) for high-definition video 
cameras that can be used to record and play high-resolution 
HD images.
BD-J
Some BD-Video discs contain Java applications, and these 
applications are called BD-J. You can enjoy various interactive 
features in addition to playing normal video.
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 
channel) before it is decoded into its various channels.
Deep Color
Deep Color is a name for the device that can reproduce 
greater color gradation (4096 st eps) when connected to a TV 
that supports the Deep Color with an HDMI cable. You can 
enjoy exceptionally rich, natur al-looking colors, with smooth, 
detailed gradation and minimal color banding. [A lower color 
gradation (256 steps), without Deep Color, will be reproduced if 
connected to a TV which does not support Deep Color. The 
unit will automatically set appropriate output to suit the 
connected TV.]
Dolby Digital
This is a method of coding digital signals developed by Dolby 
Laboratories. Apart from stereo (2-channel) audio, these 
signals can also be multi-channel audio.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible 
using Dolby Digital Plus. BD-Video supports up to 7.1 channel 
output.
Dolby Pro Logic II
Dolby Pro Logic II enables you to play stereo sources on 5.1 
channel.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that 
reproduces the studio master audio. BD-Video supports up to 
7.1 channel output.
Down-mixing
This is the process of remixing the multi-channel audio found 
on some discs into fewer channels.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is 
good separation between the channels, so realistic sound 
effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in 
movie theaters. Previous DTS Digital Surround-compatible 
equipment can play DTS-HD as DTS Digital Surround audio. 
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achiev ed by improving the previous 
DTS, DTS-ES and DTS 96/24 formats. It is compatible with 
sampling frequency 96 kHz/48 kHz. BD-Video supports up to 
7.1 channel output. DTS-HD Master Audio | Essential
This is a lossless audio format and compatible with 96 kHz/
7.1 ch and 192 kHz/2 ch or less. In addition, faithful 
reproduction of the master audio is enabled using lossless 
audio encoding technology. BD-Video supports up to 
7.1 channel output.
Dynamic range
Dynamic range is the difference between the lowest level of 
sound that can be heard above the noise of the equipment and 
the highest level of sound before distortion occurs.
Dynamic range compression means reducing the gap between 
the loudest and softest sounds. Th
is means you can listen at 
low volumes but still hear dialog clearly.
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products. 
Unlike conventional connections,  it transmits uncompressed 
digital video and audio signals on a single cable.
Local storage
This storage area is used as a destination for sub contents for 
playing BD-Live on BD-Video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those found 
on CDs.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital 
audio, enabling you to enjoy digital audio with no hassle.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which  makes use of an exclusive 
Panasonic algorithm. Various  processing is supported, 
including a high-level conversion of the TV scanning format 
from interlace to progressive and a high-level conversion of 
standard resolution (480i or 576i) video signal to a 1080 High- 
Definition video signal.
Consequently, this unit is able to provide video of optimal 
resolution to the connected TV.
x.v.Color
TM
x.v.ColorTM is a name for devices that are compatible with the 
xvYCC format, an international standard for expanded color in 
motion pictures, and that follow the rules for signal 
transmission.
You can enjoy vivid colors of wider color ranges for a more 
realistic picture when connected to a TV that supports the 
x.v.Color
TM with HDMI cable.
24p
This is a progressive image recor ded at a rate of 24 frames per 
second (motion-picture film). Many BD-Video movie contents 
are recorded in 24 frames/second  in accordance with the film 
materials.
SC-BTT750_350P_VQT2W18_eng.book  47 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							48
VQT2W18
Specifications
GENERAL
Power consumption:90 W
Power consumption in standby mode: Approx. 0.05 W
Power supply: AC 120 V, 60 Hz
iPod/iPhone Connector: DC OUT 5 V 500 mA MAX
WIRELESS LAN Connector: DC OUT 5 V 500 mA
Dimensions (W kHk D): 430 mmk62 mm k287 mm
(16
15/16qk 27/16qk115/16q)
Mass (Weight): Approx. 3.5 kg (7.71 lbs)
(Dimensions and Weight do not 
include speakers)
Operating temperature
range: 0
oC to 40oC 
(32oF to 104oF)
Operating humidity range: 35 % to 80 % RH 
(no condensation)
AMPLIFIER SECTION
RMS TTL POWER OUTPUT:1000 W
1 kHz, 10 % total harmonic distortion FRONT: 125 W per ch (3≠)
CENTER: 250 W per ch (6≠)
SURROUND: 125 W per ch (3≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER: 250 W per ch (6≠)
FTC TTL POWER OUTPUT: 446 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion
FRONT: 60 W per ch (3≠)
CENTER: 106 W per ch (6≠)
SURROUND: 60 W per ch (3≠)
45 Hz to 120 Hz, 1.0 % total harmonic distortion SUBWOOFER: 100 W per ch (6≠)
Audio Input AUX: k1
Digital Audio Input Optical: k1
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital
FM TUNER SECTION
Preset memory:30 stations
Frequency range: 87.9 MHz to 107.9 MHz (200 kHz step),
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals: 75≠ (unbalanced)
SPEAKER SECTION
FRONT SPEAKERS[BTT750] SB-HF730
Ty p e : 2 WAY 3 SPEAKER Bass-ref.
Woofer: 3.5 cm k 10 cm (1
3/8qk 4q) CONE 
TYPE k 2
Tweeter: 2.5 cm (1q) SEMI-DOME TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz ( j10 dB)
Dimensions (W kHk D): 255 mmk1024 mmk 255 mm
(10
1/16qk 4011/32qk101/16q)
Mass (Weight): Approx. 2.3 kg (5.07 lbs)
[BTT350] SB-HF230
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 80 mmk11 8 . 5 m m k68 mm
(3
5/32qk 411/16qk211/16q)
Mass (Weight): Approx. 0.4 kg (0.88 lbs)
SC-BTT750_350P_VQT2W18_eng.book  48 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Reference
49
VQT2W18
Specifications are subject to change without notice.
CENTER SPEAKER[BTT750] SB-HC730
Ty p e : 2 WAY 3 SPEAKER Bass-ref.
Woofer: 3.5 cm k 10 cm (1
3/8qk 4q) CONE 
TYPE k 2
Tweeter: 2.5 cm (1q) SEMI-DOME TYPE
Impedance: 6≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz ( j10 dB)
Dimensions (W kHk D): 424 mmk59 mmk 76 mm
(16
23/32qk 211/32qk3 q)
Mass (Weight): Approx. 1.06 kg (2.34 lbs)
[BTT350] SB-HC480
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 6≠
Output sound pressure: 79 dB/W (1 m)
Frequency range: 90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 145 mmk85 mmk 71.5 mm
(5
23/32qk311/32qk 213/16q)
Mass (Weight): Approx. 0.6 kg (1.32 lbs)
SURROUND SPEAKERS
[BTT750] [BTT350]  SB-HS230
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 80 mmk11 8 . 5 m m k68 mm
(3
5/32qk 411/16qk211/16q)
Mass (Weight): Approx. 0.4 kg (0.88 lbs)
SUBWOOFER
[BTT750]  SB-HW330
Ty p e : 1 WAY 1 SPEAKER (Kelton type)
Woofer: 16 cm (6
1/2q) CONE TYPE
Passive radiator: 25 cm (10q)
Impedance: 6≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 35 Hz to 180 Hz (j16 dB),
40 Hz to 160 Hz ( j10 dB)
Dimensions (W kHk D): 180.5 mmk322 mm k351 mm
(7
1/8qk 1211/16qk1313/16q)
Mass (Weight): Approx. 4.6 kg (10.1 lbs)
[BTT350] SB-HW480
Ty p e : 1 WAY 1 SPEAKER Bass- ref.
Woofer: 16 cm (6
1/2q) CONE TYPE
Impedance: 6≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 40 Hz to 220 Hz (j16 dB),
45 Hz to 180 Hz ( j10 dB)
Dimensions (W kHk D): 145 mmk289.5 mm k258 mm
(5
23/32qk1113/32qk 105/32q)
Mass (Weight): Approx. 2.8 kg (6.17 lbs)
TERMINAL SECTION
USB: USB 2.0 (Use for Wireless LAN 
Adaptor only)1 systemEthernet:10BASE-T/100BASE-TX 1 systemSD card slot:Connector: 1 system
[BTT750] Wireless LAN Adaptor (DY-WL10)
Power supply: DC 5 V (USB powered) 500 mA
Power consumption: Max 2500 mW
Dimensions (W kHk D):
44 mmk27 mm k72 mm
(1
3/4zk 11/8zk27/8z)
Mass (Weight): Approx. 29 g (1.02 oz)
Antenna: Tx 1, Rx 2
Interface: USB 2.0
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM  system, DSSS system
Frequency Range: IEEE802.11n / IEEE802.11a: 5.15 GHz - 5.35 GHz
5.47 GHz - 5.825 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)
*1:
IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Access Mode: Infrastructure mode
Security
*2: WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
*1 Transfer rates are theoretical values; however, actual communication 
rate will vary according to communication environment or connected 
equipment.
*2 This unit supports WPA and WPA2 encryption.
VIDEO SECTION
Signal system: NTSC
Video output Output level: 1.0 Vp-p (75≠)
Output connector: Pin jack (1 system)
HDMI AV output Output format: 1080p/1080i/720p/480p
Output connector: Type A (19 pin)
HDMI (
with 3D, ARC, Content Type)This unit supports “HDAVI Control 
5” function.
LASER Specification: Class  I LASER Product
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 
nm (BDs)
Laser power:
No hazardous radiation is emitted 
with the safety protection
SC-BTT750_350P_VQT2W18_eng.book  49 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							50
VQT2W18
Java and all Java-based trademarks and logos are trademarks or 
registered trademarks of Sun Microsystems, Inc. in the United States and 
other countries.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, 
and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 
7,333,929; 7,212,872 & other U.S. and worldwide patents issued & 
pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD 
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. 
Product includes software.
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by U.S. 
patents and other intellectual property rights of Rovi Corporation. Reverse 
engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC in the United 
States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 
patent portfolio license for the personal and non-commercial use of a 
consumer to (i) encode video in compliance with the AVC Standard and 
VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video 
that was encoded by a consumer engaged in a personal and 
non-commercial activity and/or was obtained from a video provider 
licensed to provide AVC/VC-1 Video. No license is granted or shall be 
implied for any other use. Additional information may be obtained from 
MPEG LA, LLC. See http://www.mpegla.com
.
HDAVI Control
TM is a trademark of Panasonic Corporation.
x.v.Color
TM is a trademark.
VIERA Link
TM is a trademark of Panasonic Corporation.
VIERA CAST
TM is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation 
and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray 
Disc Association.
“BD-Live” and “BD-Live” logo are trademarks of Blu-ray Disc Association.
“BONUSVIEW” and “BONUSVIEW” logo are trademarks of Blu-ray Disc 
Association.
YouTube and Picasa are trademarks of Google, Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc 
Association.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory 
has been designed to connect specifically to iPod, or iPhone, respectively, 
and has been certified by the developer to meet Apple performance 
standards.
Apple is not responsible for the operation of this device or its compliance 
with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of 
Apple Inc., registered in the U.S. and other countries.
This product incorporates  the following software:
(1)  the software developed independently by or for  Panasonic Corporation,
(2)  the software owned by third party and licensed to  Panasonic Corporation,
(3)  the software licensed under the GNU General Public 
License, Version 2 (GPL v2),
(4)  the software licensed under the GNU LESSER General  Public License, Version 2.1 (LGPL v2.1) and/or,
(5)  open sourced software other than the software licensed  under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to 
the terms and conditions of GPL v2 and LGPL v2.1, as the 
case may be at 
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are 
copyrighted by several individuals. Please refer to the 
copyright notice of those individuals at 
http://www.am-linux.jp/dl/JPRCBW98
The GPL/LGPL software is distributed in the hope that it will 
be useful, but WITHOUT ANY WARRANTY, without even the 
implied warranty of MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
At least three (3) years from delivery of products, Panasonic 
will give to any third party who contacts us at the contact 
information provided below, for a charge no more than our 
cost of physically performing source code distribution, a 
complete machine-readable copy of the corresponding 
source code covered under GPL v2/LGPL v2.1.
Contact Information
[email protected]
Source code is also freely available to you and any other 
member of the public via our website below.
http://www.am-linux.jp/dl/JPRCBW98
SC-BTT750_350P_VQT2W18_eng.book  50 ページ  ２０１０年６月２１日　月曜日　午後４時５１分