Panasonic Bluray Disc Home Theater Sound System Sc Btt750 Operating Instructions

							TV
31
VQT2W18
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch the 
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that 
supports HDAVI Control 2 or later.)
Select “Video” in “Power Off Link” (>38)
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the 
“Control Panel” and display the Top Menu or Pop-up Menu, 
etc.
≥ This works only during “BD/DVD” or “SD” playback and 
resume modes.
1Press [SUB MENU].
2Select an item, then press [OK].
≥The sub menu may not appear while the Top Menu for 
BD-Video or DVD-Video is displayed.
	≥ The buttons that you can use for this unit vary depending on the TV. For 
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible 
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed 
from the TV’s remote control.
Power off link
Easy control only with VIERA 
remote control
e.g. BD-VideoControl Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENUOKRETURN
SC-BTT750_350P_VQT2W18_eng.book  31 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							32
VQT2W18
Other de vic es
Using the iPod/iPhone
Preparation
≥Before connecting/disconnecting the iPod/iPhone, turn the 
main unit off or reduce the volume of the main unit to its 
minimum.
≥ Make sure that the video cable connection is made to view 
photos/videos from the iPod/iPhone.
1Push # to open the iPod/iPhone lid.
2Connect the iPod/iPhone (not supplied) 
firmly.
	About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone 
charging in main unit standby mode.
≥ Once fully recharged, additional recharging will not occur.
Compatible iPod/iPhone (as of June 2010)
≥Compatibility depends on the software version of your iPod/
iPhone.
Preparation≥Make sure that the “IPOD” source is selected. Press [iPod] to 
select the source.
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate 
photo/video output settings for your TV.
≥ To display the picture, turn on the TV and select the 
appropriate video input mode.
1Press [iPod] to select “IPOD”.
2Press [STATUS] several times to select the 
music menu or videos menu.
3Press [ 3,4] to select an item and press 
[OK].
≥ Repeat this step until the selected title starts playback.
≥ Press [ 2,1 ] to display the previous or next page.
e.g., music playback screen
To exit, press [TOP MENU/DIRECT NAVIGATOR].
1Press [iPod] to select “IPOD”.
2Press [STATUS] several times to select 
“ALL” on the unit’s display.
3Switch the TV input to video in.
4Play a slideshow on your iPod/iPhone.
The picture will be displayed on your TV.
To use the iPod touch/iPhone features
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone features on the touch screen 
to operate.
You can use the remote control to operate the iPod/iPhone 
menu.
The operation may vary among iPod/iPhone models.
≥ [3 ,4 ]: To navigate menu items
≥ [OK]: To go to the next menu.
≥ [RETURN]: To return to the previous menu.
iPod/iPhone Connection
A Dock adapter (not supplied)
≥Attach the dock adapter until firmly fitting into the 
dock. The adapter should be supplied with your 
iPod/iPhone for the stable use. 
If you need an adapter, consult your iPod/iPhone 
dealer.
B Dock for iPod/iPhone
NameMemory size
iPod nano 5th generation (video camera) 8 GB, 16 GB
iPod touch 2nd generation 8 GB, 16 GB, 32 GB, 64 GB
iPod classic 120 GB, 160 GB (2009)
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 160 GB (2007)
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30 GB
iPod 4th generation 40 GB
iPod 4th generation 20 GB
iPod mini 4GB, 6GB
iPhone 3GS 16 GB, 32 GB
iPhone 3G 8 GB, 16 GB
iPhone 4 GB, 8 GB, 16 GB


Main unit iPod/iPhone
1
2
iPod/iPhone Playback
Enjoy music/video
Enjoy photos
iPod
Ronaldo
-2:30
Good morning
45 of 1230
Happy days
Shuffle (Albums)
Repeat (All)1:00
SC-BTT750_350P_VQT2W18_eng.book  32 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Other devices
Advanced operations
33
VQT2W18
1Press [START].
2Press [3,4] to select “Menu” and then 
press [OK].
3Press [ 3,4] to select “Playback Mode” 
and then press [OK].
4Press [ 3,4] to select an item and press 
[OK].
Shuffle (For music playback only.)
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
Play all songs on an album in random order.
Repeat
One:
Play a single song/video repeatedly.
All:
Play all songs/videos from se lected items (e.g., Playlists, 
Albums, etc.) repeatedly.
5Press [ 3,4] to select the setting and press 
[OK].
	≥ The setting of the playback mode will be kept until changes are made on 
the same iPod/iPhone.
≥ This function does not work when “All (iPod display)” is selected.
(For music and video playback only)
	≥Surround sound effect and sound mode are available ( >23).
Adv ance d o perations
Enjoying VIERA 
CAST
TM
You can access a selection of Internet services from the Home 
screen with VIERA CAST, for example YouTube, Picasa Web 
Albums. (Current as of June 2010)
Preparation≥Network connection ( >16)
≥ Network setting ( >19)
1Press [VIERA CAST].
Message is displayed. Please read these instructions 
carefully and then press [OK].
2Press [ 3,4,2, 1] to select the item and 
press [OK].
Operable buttons: 
[ 3 ,4 ,2, 1], [OK], [RETURN], colored buttons, number 
buttons
VIERA CAST Home screen;
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].
≥ When the Blu-ray disc logo is selected on the Home screen, 
the playback source will be changed and go back to the 
source previously selected.
	≥ In the following cases, settings are possible using “Internet Content 
Settings” ( >39)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly. 
A high-speed Internet service with a speed of at least 6 Mbps is 
recommended.
≥ Be sure to update the firmware when a firmware update notice is displayed 
on the screen. If the firmware is not updated, you will not be able to use the 
VIERA CAST function. ( >20)
≥ VIERA CAST
TM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective 
service providers, and service may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic will make no warranty 
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be 
presented in specific languages.
Other methods of playback
Basic controls
ButtonsFunctions
[ 1 PLAY] Play
[ ∫ STOP] Pause
[ ; PA U S E ]
[SKIP: , 
SKIP 9] Skip
(Press and hold) [SEARCH6 , 
SEARCH 5] Search
MORE
BACK
COMING SOONXXXXXX
COMING SOONXXX
XXXXXX
Featured Videos
Weather
TOMORROWNew York, NY69 Ã56Ã
76
ÃNW 10
mph
H
L
XXXXXX
 Featured Photos
Images are for illustration purposes, contents may 
change without notice.
SC-BTT750_350P_VQT2W18_eng.book  33 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							34
VQT2W18
Playback menu
1Press [BD/SD] to select “BD/DVD”.
2Press [DISPLAY].
e.g., BD-Video
3Press [3,4] to select the menu and press 
[ 1].
4Press [ 3,4, 2,1] to select the item and 
press [ 1].
5Press [ 3,4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped, 
etc.) and media contents, there may be some items that 
you cannot select or change.
Regarding Language, Audio attribute and Video attribute: 
(> 46)
Signal Type
Primary Video
Secondary Video
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending 
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(>24, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu. (> 24)
VideoAudio
PlayDisc
Subtitle StyleAngle
SubtitleOff Main1ENG
-
-
Signal Type
Menus Items
Settings
Disc
VideoThe recording method of original video 
appears.
SoundtrackSelect the type of audio or language.
VideoSelect on/off of images. The recording 
method of original video appears.
SoundtrackSelect on/off of audio and the language.
SC-BTT750_350P_VQT2W18_eng.book  34 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Advanced operations
35
VQT2W18
Repeat Play
(Only when the elapsed time is being displayed on the unit’s 
display.)
Select the item which you want to repeat. The items displayed 
differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Pop-Out Level
[Only when “Full HD” is selected in “3D Type” (>37).]
Pop-up position for the Playback menu or message screen etc. 
can be adjusted during 3D playback.
Picture
Select the picture quality mode during play.
Detail Clarity
The picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit 
the type of material being played.
≥ When the content is distorted change the settings from 
“Auto” to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p are 
output at 24p.
≥Only when you have selected “On” in “24p Output” ( >38)
Sound Effects*1, *2
(Discs recorded at 48 kHz or less)
This feature gives you bright er sound by increasing the high 
frequency portion of the audio.
Dialog Enhancer*1
The volume of the center channel is raised to make dialog 
easier to hear.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for 
outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity 
Sound” ( >37).
Play
Video
Audio
Re-master 1 Pop and rock
Re-master 2Jazz
Re-master 3Classical
*1 When audio is output from the HDMI AV OUT terminal this function is 
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 37)
*2 This function has no effect when the type of audio is Dolby Pro Logic II.
SC-BTT750_350P_VQT2W18_eng.book  35 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							36
VQT2W18
Setup menu
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1Press [START] and press [3,4] to select 
“Other Functions” and press [OK].
2Press [ 3,4] to select “Setup” and press 
[OK].
3Press [ 3,4] to select the menu and press 
[OK].
4Press [ 3,4] to select the item and press 
[OK].
If there are any other items, repeat these steps.
5Press [ 3,4,2, 1] to select the option and 
press [OK].
≥ There may be differences in operation methods. If this 
happens, follow the on-screen instructions for the operation.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions. Enter the 4-digit password 
with the number buttons when the password screen is 
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥Follow the on-screen instructions. Enter the 4-digit password 
with the number buttons when the password screen is 
shown.
Playback Method for 3D Disc
Select the playback method of 3D compatible video software.
3D Playback Precautions
Set to display or hide the 3D viewing warning screen when 
playing back the 3D compatible video software.
Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc 
will be selected.
≥ Enter a code ( >46) with the number buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Language
Choose the language for the subtitle.
≥If “Automatic” is selected and the language selected for 
“Audio Language” is not available, subtitles of that language 
will automatically appear if available on that disc.
≥ Enter a code ( >46) with the number buttons when you 
select “Other  ¢¢¢¢”.
Menu Language
Choose the language for the disc menus.
≥Enter a code ( >46) with the number buttons when you 
select “Other  ¢¢¢¢”.
BD-Live Internet Access ( >26)
You can restrict Internet access when BD-Live functions are 
used.
≥If “Allow ( Limited )” is selected, Internet access is permitted 
only for BD-Live contents which have content owner 
certificates.
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Seamless Play
The chapter segments in play lists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the 
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.
About the password
The password of the following items are common.
Don’t forget your password.
≥
“DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” ( >39)
RETURN
SetupDiscVideoAudioDisplayTV / Device ConnectionNetworkOthers
OK
Disc
Video
AutoAutomatically selects the type of picture shown.
FieldSelect if jittering occurs when “Auto” is selected.
FrameSelect if small text or fine patterns cannot be 
seen clearly when “Auto” is selected.
SC-BTT750_350P_VQT2W18_eng.book  36 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Advanced operations
37
VQT2W18
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
Digital Audio Input
Press [OK] to show the following settings:
Downmix
Select the downmix system to enjoy multi-channel or 
2-channel sound.
≥Select “Surround encoded” to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
– Playback of secondary audio  (including the button click 
sound).
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded 
and played back at 7.1ch.
≥ If “Off” is selected, sound is  played over the original number 
of channels (Note that in the case of 6.1ch audio, playback 
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD or LPCM.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for 
outputting image, it produces clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the 
Playback menu to “On”. ( >35)
Audio Delay
Mis-sync between the video and audio is corrected by delaying 
the audio output.
Speaker
Refer to page 40
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”:
If there is no operation for 5 minutes or more, DIRECT 
NAVIGATOR screen switches to START menu automatically.
≥ While playing and pausing, etc., this function is not available.
≥ While playing music (CD-DA or MP3), after about 5 minutes 
DIRECT NAVIGATOR screen switches to a blank screen 
with “Screen Saver” message.
FL Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected, the display is dimmed but brightens 
when you perform some operations.
FL Control (Vol 0)
≥If “On” is selected, the unit’s display will turn off when the 
volume is adjusted to “0”.
License
Information about the software used by this unit is displayed.
3D Type
Select the format of the connected TV.
≥Change the settings for 3D on the TV also when “Checker 
board” or “Side by side” is selected.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 
ratio image:
Audio
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output
.
≥Select “PCM ”, when the connected equipment cannot 
decode the respective audio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). ( >25)
≥ If “Off” is select ed, the unit outputs t he primary audio only.
PCM-FIX
Select the audio signal to input
.≥ “On”: PCM is available.
≥ “Off”: PCM and Dolby Digital are available.
Select “On” if the sound is cut off intermittently.
Display
TV / Device Connection
4:3The sides are cut off so the 
picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.
4:3 LetterboxBlack bands appear at the 
top and bottom of the 
picture.
When connected to a 16:9 widescreen television and playing 
4:3 ratio image:
16:9Video is displayed as a 4:3 ratio image in the 
center of the screen.
SC-BTT750_350P_VQT2W18_eng.book  37 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							38
VQT2W18
HDMI Connection
Press [OK] to show the following settings:
TV Audio Input
Select the TV audio input to work with the VIERA Link 
operations.
HDMI Resolution
The items supported by t
he connected devices are 
indicated on the screen as “ ¢”. When any item without “ ¢” 
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output 
resolution best suited to the connected television.
≥ To enjoy high-definition vide o up-converted to 1080p, you 
need to connect the unit directly to 1080p compatible 
HDTV (High Definition Television). If this unit is connected 
to an HDTV through other equipment, it must also be 
1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set 
“24p” in “Video” ( >35) to “On”.
≥ When BD-Video images other than 24p are played, 
images are output at 60p.
HDMI Color Mode
This setting is for selecting color-space conversion of the 
image signal when the unit is connected using an HDMI 
cable.
HDMI Audio Output
This setting selects whether or not to output audio from 
HDMI.
≥ Audio will be output through the systems speakers when 
Off is selected.
VIERA Link
Set to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color output 
when a television that supports Deep Color is connected.
Contents Type Flag
Depending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.
Power Off Link
Select the desired power off link setting of this unit for 
VIERA Link operation ( >31). (This works depending on the 
settings of the connected VIERA Link “HDAVI Control” 
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off automatically.
Video:
When the TV is turned off, this unit will turn off except during 
the following conditions: j CD or MP3 audio playback
j iPod/iPhone mode
j Radio mode
j “AUX”,“ARC” or “D-IN” (DIGITAL IN) mode 
(non-selected TV AUDIO setting for VIERA Link)
j “D-IN” (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
SC-BTT750_350P_VQT2W18_eng.book  38 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							Advanced operations
39
VQT2W18
Network Easy Setting (>19)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Remote Control Code
Change the remote control code, when other Panasonic 
products react to this remote control.
Quick Start*
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so 
contents of the following will be different from the time it is 
set to “Off”.
– Idle power consumption will increase. (about the power 
consumption  >48)
* Depending on the power conserving setting activated on  the TV, this function may have less effect when the unit is 
started by the power on link function. ( >30)
Easy setup ( >18)
You can execute basic settings  to optimize your home theater 
system.
Restore Default Settings
This returns all values in the Setup menu and the Playback 
menu, except for “Remote Control Code”, “LAN Connection 
Mode”, “Access Point Connection Setting”, “IP Address / DNS 
Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video 
Ratings” and “BD-Video Ratings” etc. to the default settings.
System Information
Display the following items: – Firmware version of this unit
–[BTT750]  Wireless LAN module of supplied Wireless LAN 
Adaptor
– [BTT350]  Wireless LAN module of optional Wireless LAN 
Adaptor
Firmware Update ( >20)
Press [OK] to show the following settings:
Network
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and 
connection settings to be set and the current connection 
settings and connection state to be checked when a 
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will 
be displayed.
IP Address / DNS Settings
This is for checking the state of the network connection and 
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto 
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy 
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings ( >33) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter the 4-digit 
password with the number buttons when the password 
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is 
adjusted automatically to the standard volume while using 
the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s 
time to match your location.
≥ Some VIERA CAST contents require the time zone to be 
set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Automatic Update Check
When this equipment remains connected to the Internet, it 
will check for the latest firmware version when it is turned on 
and you can update it if necessary.
Update Now
You can update the firmware manually.
SC-BTT750_350P_VQT2W18_eng.book  39 ページ  ２０１０年６月２１日　月曜日　午後４時５１分 
						

							40
VQT2W18
Delay time
For optimum listening with 5.1-channel sound, all the 
speakers, except for the subwoofer, should be the same 
distance from the seating position.
If either distance A or  B  is less than  C (> below), find the 
difference in the relevant table and adjust the delay time to 
make up for the difference.
1Press [ 3,4, 2,1] to select the distance 
box ( ) and press [OK].
e.g., 5.1ch setting
e.g., 7.1ch setting
2Press [ 3,4] to select the setting and press 
[OK].
∫ When using the 7.1ch speaker system
1 Check the distance difference of both the front speakers 
and the surround back speakers from the seating position.
2 Set the delay time of the surround back speakers.
Volume (Channel balance) ( )
(Effective when playing multi-channel audio)
1Select “Test” and press [OK].
A test signal is output.
2While listening to the test signal
Press [ 3,4] to adjust the volume of each 
speaker.
The volume can be adjusted between  r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the 
Front (L) and Front (R) speaker volume respectively.
3Press [OK].
The test signal stops.
To finish the speaker setting
Press [ 3,4, 2,1 ] to select “Complete” and press [OK].
Speaker settings
A B C: Primary listening distance
A Approximate room dimensions
B Actual speaker position
C Ideal speaker position
D Circle of constant pr imary listening distance
A Center (C)
B Left Surround (LS), Right Surround (RS)
C Left Surround back (LB), Right Surround back (RB)
A Center speaker
DifferenceSetting
Approx. 34 cm (1 ft. 1 in.) 1.0 ms
Approx. 68 cm (2 ft. 2 in.) 2.0 ms
Approx. 102 cm (3 ft. 4 in.) 3.0 ms
Approx. 136 cm (4 ft. 5 in.) 4.0 ms
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
: 
: L
LS
R
SW
C
RS
C
RSLS
A
B
C
A
B
C
D
0.0ms
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW


0
00
0.0
0.0
0.000dB
dBmsRB
LB
ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW

B Surround speakers/
Surround back speakers
DifferenceSetting
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 340 cm (11 ft. 1 in.) 10.0 ms
Approx. 510 cm (16 ft. 8 in.) 15.0 ms
Adjusting speaker level
ACenter (C)
B Te s t
C Left Surround (LS), Right Surround (RS)
dB0
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW



e.g., 5.1ch setting
SC-BTT750_350P_VQT2W18_eng.book  40 ページ  ２０１０年６月２１日　月曜日　午後４時５１分