Panasonic Bb Gt1500 Operating Instructions Manual

Preparation
21For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
handset on the base unit and let it 
charge for 7 hours.
Battery replacement
Important:
LUse only the rechargeable Panasonic 
battery noted on page 8.
Replace the old battery with a new one. 
See page 18, step 4.
Attention:
A nickel metal hydride battery that is 
recyclable powers the product you have 
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to 
recycle this...

Preparation
22For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Understanding the indicators on the base unit
TEL indicator/IP indicator
The TEL indicator and IP indicator show the status of the landline and IP line, 
respectively, as follows.
*1k When another phone uses the same landline, the TEL indicator lights.
STATUS indicator
During the startup process you may notice that the STATUS indicator on the base 
unit is flashing. This indicates that the base unit is...

Preparation
23For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Amber OnLThe base unit’s IP address may conflict with the 
IP addresses of other devices on your local 
network. Check the base unit’s static IP address 
using the handset: {MENU} i {#}{5}{0}{1}, 
then check the IP addresses of the other devices 
on your local network. If necessary, change the 
base unit’s static IP address (page 29).
FlashingLThe base unit is obtaining an IP address or is 
obtaining...

Preparation
24For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
OFF —LThe power on the base unit is off.
LTo use the A IP line, you need to agree to the 
Terms of Use for the A services using the 
handset (page 18).
LThe Ethernet cable is not connected properly. 
Connect it.
LYour network devices (hub, router, etc.) are 
turned off. Check the LEDs for the link status of 
the devices.
StatusMeaning
ColorLight pattern
GT15xx.book  Page 24  Monday, June 4, 2007  8:52 AM 

Preparation
25For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Displays
Base unit display items
Handset display items
Available model:
BB-GT1540
Displayed 
itemMeaning
Base unit ringer for 
landline is off (page 
55).
Base unit ringer for IP 
line is off (page 55).
EGreeting or voice 
memo recording error 
(page 58, 60)
Example:
H 1Handset number: 
displayed when 
paging, or being 
paged (example 
shown here: handset 
1).
HPaging all handsets 
(page 68)
mLandline...

Preparation
26For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Handset menu icons
When in standby mode, pressing down 
on the center of the joystick ({MENU}) 
reveals the handset’s main menu. From 
here you can access various features 
and settings. iIP line is used.
When flashing:
– an internet call is on 
hold.
– the answering 
system is 
answering an 
internet call.
*2
When flashing rapidly: 
an internet call is 
being received.
sSpeaker is on.
PRIV. Call...

Preparation
27For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Setting the unit before 
use
Important:
LTo program features by scrolling 
through the display menus, see page 
46.
LMainly the direct command method is 
used in these operating instructions.
Display language N
The default setting is “English”.
1{OFF} i {MENU} i 
{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press down the center of the joystick 
to save. i {OFF}
Voice guidance language N
You can...

Preparation
28For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
IP/TEL line selection
The line selection mode determines the 
line selected when you press {s} to 
make a call.
–“IP”: IP line is selected.
–“TEL” (default): Landline is selected. 
If you dial a A number (page 4) 
then press {s} using the handset, the 
IP line is automatically selected.
Note:
LYou can select a line manually 
regardless of the line selection mode 
by pressing {TEL} or {IP}.
Handset line...

Preparation
29For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Static setup N
If your local network does not use a 
DHCP server for automatic IP address 
assignments, turn the DHCP connection 
mode off first. Then set the static IP 
address and other Internet connection 
settings corresponding to your local 
network.
Turning the DHCP connection mode 
off:
1{MENU} i {#}{5}{0}{0}
2{V}/{^}: “Off”
3{SAVE} i {OFF}
Setting the static IP address and 
other settings:...

Preparation
30For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Confirming your A numbers N
After the installation is complete (page 
17, 28), the unit is registered to the 
service and you receive your A 
number. The A number is displayed 
on handset 1 (included with the base 
unit). Once you start operations with the 
handset, it disappears from the display.
You can also view your A number 
using any handset as follows.
1{MENU} i {#}{1}{0}{3}
LThe A number is...