Panasonic Bb Gt1500 Operating Instructions Manual

Programming
51For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Ring color
(Ringer indicator color){2}{3}{5}{1}: 
{2}: Color2
{3}: Color3
{4}: Multicolor–
Ringer tone 
(Handset)IP{1}{6}{1}{1}{1}-{3}: Tone 1-3
{4}-{6}: Melody 1-3
{7}: Demo
*5
IP: 
TEL: 53
TEL{1}{6}{1}{2}
Ringer 
volume 
(Handset)IP{1}{6}{0}{1}{1}-{6}: Level 1–6 
{0}: Off–
TEL{1}{6}{0}{2}
Web site
*6
(Customer support){6}{8}{0}www.globarange.com–
*1 If you subscribe to Caller ID service and want to...

Programming
52For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
For landline k
*1 If you program these settings using one of the handsets, you do not need to 
program the same item using another handset.
*2 Generally, the line mode setting should not be adjusted. If S is not displayed on 
the handset or the TEL indicator on the base unit does not light properly when 
another phone connected to the same line is in use, you need to change the line 
mode to “A”.
*3...

Programming
53For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
For the answering system (BB-GT1540)
*1 If you program these settings using one of the handsets, you do not need to 
program the same item using another handset.
*2l Depending on the condition of your network connection, “Toll saver” 
may not be used for the IP line.
Adjusting the handset ringer tone N
You can change the ringer tone heard when an outside call is received for each line. 
You can also...

Programming
54For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Alarm N
An alarm will sound for 3 minutes at the set time. Set the date and time beforehand 
(page 27).
1{MENU} i {#}{7}{2}{0} i {OK}
2{V}/{^}: Select the desired alarm mode. i {SELECT}
3Set the desired time. i {OK}
4{V}/{^}: Select the desired ringer tone. i {SELECT}
LWe recommend selecting a ringer tone different from the ringer tone set for 
incoming calls.
5{V}/{^}: “Save” i {SELECT} i {OFF}
Note:...

Programming
55For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Setting the flash time k N
The flash time depends on your telephone exchange or host PBX. Consult your PBX 
supplier if necessary. The default setting is “700ms”. The setting should stay at 
“700ms” unless pressing {FLASH} fails to pick up the call waiting call.
1{MENU} i {#}{1}{2}{1}
2{V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Updating the base unit software N
A may offer new features and...

Programming
56For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Setting the base unit ringer tone (BB-GT1540) f
There are 3 tones and 3 melodies.
1Press {IP/TEL} repeatedly until the display shows the desired line (n or 
m).
LYou cannot set the ringer tone for both lines at the same time.
2{^}
3Within 10 seconds, press {} repeatedly to select the desired tone.
LTo stop ringing, press {STOP}.
Note:
Lk If you subscribe to a distinctive ring service (such as...

Answering System
57For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Answering system
This unit contains an answering system 
which can answer and record calls for 
you when you are unavailable to answer 
the phone.
Important:
LOnly 1 person can access the 
answering system at a time.
LWhen callers leave messages, the 
unit records the day and time of each 
message. Make sure the date and 
time have been correctly set (page 
27).
Memory capacity
The total recording...

Answering System
58For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Greeting message
When the unit answers a call, callers are 
greeted by a greeting message. You can 
record your own greeting message or 
use a prerecorded greeting message.
Recording your greeting 
message f
You can record your own greeting 
message (max. 2 minutes) that is played 
when the answering system answers a 
call.
The greeting messages can be 
recorded:
– separately for either the IP...

Answering System
59For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Operating the answering 
system
*1 If pressed within the first 5 seconds of 
a message, the previous message is 
played.
Erasing all messages
Press {ERASE} 2 times while the unit is 
not being used.
LAll messages including voice memos 
are erased.
Erasing all messages for the desired 
line(s)
1Press {IP/TEL} repeatedly until the 
display shows the desired line(s) 
(n and/or m).
2Press {ERASE} 2...

Answering System
60For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
2Press {CALL}.
LThe indicated line is selected.
LYou can also select the line by 
pressing {TEL} or {IP}.
Operating the answering 
system
You can also operate the answering 
system by pressing dial keys on the 
handset.
To use the following commands:
{MENU} i {V}/{^}: “Answering 
device” i {SELECT}
Erasing all messages
1{MENU} i {#}{3}{2}{5}
2{V}/{^}: “Yes” i {SELECT}
LWhen all items have been...