Panasonic Audio Mixer Wr Xs3 Operating Instructions

31
■Using CD/MD Player through LINE IN
This section describes amplification when a CD player or
MD player, etc. is connected to the LINE IN jack at the front
panel.
1. Set the LINE IN jacks output level knob to 0.
2. Connect the CD/MD player etc. to the LINE IN jack.
3. Press the ST, MONO or SUB button to assign an output
line to the LINE IN jack.
4. Press the POWER switch to turn on the power.
5. Play back an external device such as a CD/MD player,
etc.
6. Increase the input level with MULTI IN knob...

32
BLOCK DIAGRAM
HPF
SENS
SENS
MONO 1MULTI IN
MONO
MULTI IN
ST
LINE IN
(FRONT PANEL)
HPF
MONO 2
HPF
MONO 3
HPF
MONO 4
ST 1
MUTE SENSE
REAR PANEL SW
ST 2ST 3ST 4
SUB IN
Mute
STEREO
MONO
SUB Assign SW
(FRONT PANEL)
LSTEREO MONO SUB
R
ST/MONO
Inner SW
L
RREC OUT
STEREO OUT
MONO OUT
SUB OUT
PEAK LED
MONO 1
about MODE
MODE SELECT A  MODE SELECT B
MODE 1 ON  ON
MODE 2  ON  OFF
MODE 3  OFF  OFFON
MONO 2MONO 3MONO 4ST 1ST 2ST 3ST 4MODE SELECT BMODE SELECT A
MODE SELECT INPUT SELECT
for SUB OUT
MIXING POINT...

33
HPF
SENS
SENS
MONO 1MULTI IN
MONO
MULTI IN
ST
LINE IN
(FRONT PANEL)
HPF
MONO 2
HPF
MONO 3
HPF
MONO 4
ST 1
MUTE SENSE
REAR PANEL SW
ST 2ST 3ST 4
SUB IN
Mute
STEREO
MONO
SUB Assign SW
(FRONT PANEL)
LSTEREO MONO SUB
R
ST/MONO
Inner SW
L
RREC OUT
STEREO OUT
MONO OUT
SUB OUT
PEAK LED
MONO 1
about MODE
MODE SELECT A  MODE SELECT B
MODE 1 ON  ON
ON
MONO 2MONO 3MONO 4ST 1ST 2ST 3ST 4MODE SELECT BMODE SELECT A
MODE SELECT INPUT SELECT
for SUB OUT
MIXING POINT
Electric Switch
MULTI IN MONOInner SW
■MODE1 

34
■MODE 2
HPF
SENS
SENS
MONO 1MULTI IN
MONO
MULTI IN
ST
LINE IN
(FRONT PANEL)
HPF
MONO 2
HPF
MONO 3
HPF
MONO 4
ST 1
MUTE SENSE
REAR PANEL SW
ST 2ST 3ST 4
SUB IN
Mute
STEREO
MONO
SUB Assign SW
(FRONT PANEL)
LSTEREO MONO SUB
R
ST/MONO
Inner SW
L
RREC OUT
STEREO OUT
MONO OUT
SUB OUT
PEAK LED
MONO 1
about MODE
MODE SELECT A  MODE SELECT B
MODE 2 ON  OFF
ON
MONO 2MONO 3MONO 4ST 1ST 2ST 3ST 4MODE SELECT BMODE SELECT A
MODE SELECT INPUT SELECT
for SUB OUT
MIXING POINT
Electric Switch
MULTI IN MONOInner SW 

35
■MODE 3
HPF
SENS
SENS
MONO 1MULTI IN
MONO
MULTI IN
ST
LINE IN
(FRONT PANEL)
HPF
MONO 2
HPF
MONO 3
HPF
MONO 4
ST 1
MUTE SENSE
REAR PANEL SW
ST 2ST 3ST 4
SUB IN
Mute
STEREO
MONO
SUB Assign SW
(FRONT PANEL)
LSTEREO MONO SUB
R
ST/MONO
Inner SW
L
RREC OUT
STEREO OUT
MONO OUT
SUB OUT
PEAK LED
MONO 1
about MODE
MODE SELECT A  MODE SELECT B
MODE 3 OFF  OFF
ON
MONO 2MONO 3MONO 4ST 1ST 2ST 3ST 4MODE SELECT BMODE SELECT A
MODE SELECT INPUT SELECT
for SUB OUT
MIXING POINT
Electric Switch
MULTI IN MONOInner SW 

36
LEVEL DIAGRAM
+30
+20
+10
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
–130(dBu)
+30
+20
+10
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
–130 (dBu)
ST 10
MONO 2
MONO 10
MONO 2
ST 10
MONO 10 MULTI IN
(MONO) 10CLIP LEVEL
+24
+4
–61
–86
–94
Output residual noise (TYP) MONO 10
Setting output noise (TYP)
MONO 2
ST 10Setting output noise
 (TYP)
HA1
(+38.9 to +2.4 to –3.6) (+9.6) (+11.9) (0)
(0)(+6) (–2.5)
(–6)
HA2
BA
BA
(+6)BTL
Σ
Σ
Σ
ST, MONO OUT
+4 dB
HA1(+27.6) (+9.6)
(0)(+3.5)
(–6)
HA2
BA...

37
Trouble
Check item Remedy
Power does not turn on.
No sound is heard from the
speakers connected to SUB
OUTPUT.
The power cord insulation is
damaged.
The power cord, plug and
connectors get hot during
the use.Is the power cord connected between the
inlet socket of this unit and AC receptacle?
Is the DIP switch of the assigned input line
set to OFF?Connect the power cord between the
power socket of this unit and AC recepta-
cle.
Set the DIP switch of the assigned input
line to ON. 
(Refer to p. 18)
No...

38
●Basic Specifications
Power supply 120 V AC, 60 Hz or 220 V to 240 V AC, 50 Hz*
Power consumption 10 W
Temperature range 0 °C - +45 °C (32 °F - 113 °F)
Dimensions 480 mm (W) x 44 mm (H) x 250 mm (D) [16-15/16” (W) 1-3/4” (D) x 9-7/8”] (when shipped,
excluding projections such as knobs)
Weight Approx. 3.4 kg (7.5 lbs.)
Frequency response 20 Hz to 20 kHz +0 dB/–0.5 dB (stereo input)
300 Hz to 20 kHz +0 dB/–0.5 dB (mono input, sensitivity + 60 dBu)
High-pass filter 20 Hz to 20 kHz (included in all mono...

Na0402-0 3TR001013AAA Printed in China
N19 2002 © Matsushita Communication Industrial Co., Ltd.  All rights reserved.Panasonic Canada Inc.
5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985 (809)750-4300
Panasonic Security and Digital Imaging Company
A Division of Matsushita Electric Corporation of America
Executive...