Panasonic Audio Mixer Wr Xs3 Operating Instructions
Here you can view all the pages of manual Panasonic Audio Mixer Wr Xs3 Operating Instructions . The Panasonic manuals for DJ Equipment are available online for free. You can easily download all the documents as PDF.
Page 1
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No.WR-XS3 Audio Mixer Operating Instructions
Page 2
2 The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WR-XS3 Serial No. Caution: Before attempting to connect or operate this product, please read the label on the bottom. NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to Part 15 of...
Page 3
3 Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklara- tion omhandler, er i overensstemmelse med standarder eller andre nor- mative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC. Vi deklarerar härmed värt fulla ansvar för att den...
Page 4
4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized...
Page 5
5 CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................4 PREFACE ............................................................................6 FEATURES .........................................................................6 PRECAUTIONS ...................................................................7 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ...................................................8 ■Front View .....................................................................8...
Page 6
6 This audio mixer has four mono input lines, four stereo input lines, one mono/stereo input line and three output lines. FEATURES ●Three modes applicable to different amplification systems DIP switches at the rear panel support the following amplification systems: •Mode 1: One-circuit amplification (stereo: 1 and mono: 1) •Mode 2: Two-circuit amplification (stereo: 1 or mono: 1) •Mode 3: Three-zone amplification (stereo: 1 and mono :2) ●Integrated level control of microphone sounds or BGM The mono or...
Page 7
7 PRECAUTIONS •Refer all work related to installation of this product to qualified service personnel or system installers. •Turning On the Power Turn on the unit before the amplifier is turned on. •Turning Off the Power Turn off the amplifier first, and then turn off the unit. •Connection Switch off the amplifier, the unit and any other devices before connection to prevent speaker damage. •Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There are no...
Page 8
8 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■Front View qPower switch [POWER] Toggles the power on and off. wPower indicator Lights up when the power switch is set to ON. eMono input level knobs [MONO 1 to 4] Monaural input levels are adjustable with these knobs corresponding widely to the connected devices, e.g., from microphones up to line-level source devices. Input gains are in conjunction with output gains. (Dual- level control) Note:When using Panasonic wireless microphones, set the output level...
Page 9
9 !0 Input peak indicator [INPUT PEAK] Lights up when any input signal reaches –3 dB (from the MONO INPUT 1 to 4 connectors, the STEREO INPUT 1 to 4 jacks , the MULTI INPUT ST connectors, the MULTI INPUT MONO connector and the LINE IN jack) above the clip level. !1Output level knobs [STEREO OUT] Turning to the left will lower the stereo output level. Turning to the right will raise the output level. qDIP switches Switches A and B select the unit mode from among mode 1, 2 and 3. Switches MONO 1 to 4 and...
Page 10
10 Input level: –10 dBV Impedance: 10 kΩ oMultiple mono input connector [ MULTI INPUT MONO] Connects a microphone. When using this connector, remove the short pin. Mono: 1 circuit Input connector: XLR-3-31 type balanced Input level: –45 dB Impedance: 10 kΩ !0Stereo input jacks [STEREO INPUT L/R 1 - 4] These XRL connectors receive input signals from up to 4 audio-visual devices such as a CD player and tape recorder. Stereo: 4 circuits Input jack: PIN jack unbalanced Input level: –10 dBV Impedance: 10...