Panasonic Assembly Qualifier EYFR02 Operating Instructions

Assembly Qualifier
Qualificateur d'Assemblage
Calificador Incorporado
Operating Instructions
Instructions d’utilisation
Manual de instrucciones
Model No: EYFR02
IMPORTANTThis manual contains safety information. Read manual completely before f\
irst using this product and save this manual for future use.
IMPORTANTCe mode d’emploi contient des informations sur la sécurité. Lis\
ez-le en entier avant d’utiliser le produit et conservez-le pour référence.
IMPORTANTEEste manual contiene información de...

-  - 
Index
English: Page 3 
Français:  Page 15  Español: Página  7
FUNCTIONAL DESCRIPTION
DESCRIPTION DES FONCTIONS
DESCRIPCIÓN FUNCIONAL
(A)I/O connectorConnecteur d'entrée/sortieConector de entrada/salida
(B)BeeperRonfleurAlarma
(C)Volume switchInterrupteur de volumeInterruptor de volumen
(D)Fastening accept indicatorTémoin d'acceptation de fixationIndicador de aceptación de sujeción
(E)Antenna coverCache d'antenneCubierta de antena
(F)Fastening reject indicatorTémoin de rejet...

- 3 -  
I. INTRODUCTION
Thank  you  for  purchasing  the  Panasonic Assembly  Qualifier.  The AQ  Wireless  can  monitor battery  tools.  In  its  simplest  form,  the AQ  Wireless  is  configured  to  monitor  a  tool  while  it's running, determine if the fastening process was successful, report the status of the fastening.
How to Use This Manual
• Please  read  this  manual  completely  before  starting  to  use  your AQ  Wireless.  If  this  unit  is mishandled a fatal accident, bodily injury,...

- 4 - 

II. BEFORE USING THE ASSEMBLY QUALIFIER
Downloading software
The  Assembly  Qualifier  is  configured  (relay  output  time,  frequency,  etc.)  by 
connecting  it  to  a  computer.  The  Device  Programmer  application  is  required  in 
order  to  do  this.  If  you  need  to  configure  the  Assembly  Qualifier,  the  software 
can be downloaded from the following URL:
http://denko.panasonic.biz/Ebox/powertool/factory/download/ENG/
Device Programmer system requirements
Read before use
• You...

- 5 -  

Hard disk
Ultra DMA-100 or better
At least 10 MB of space for installing the software
• When  recording  to  disk,  space  equal  to  at  least  twice  the  size  of  the  data  being 
created is required. 
•  An  error  may  occur  during  recording  if  the  compression  setting  is  enabled. 
Deselect  the  “Compress  contents  to  save  disk  space”  checkbox  in  the  hard 
disk’s “Properties.” 
Interface
Serial communications port (COM)
Other
Mouse or equivalent pointing device
Required...

- 6 - 

• Microsoft and Windows are registered trademarks or trademarks of Microsoft 
Corporation in the United States and other countries.
•  IBM  and  PC/AT  are  registered  trademarks  of  International  Business 
Machines Corporation.
•  Apple,  the Apple  logo,  Macintosh,  and  MacOS  are  registered  trademarks  of 
Apple Inc.
•  Intel, Pentium, and Celeron are registered trademarks or trademarks of Intel 
Corporation in the United States and other countries.
•  Screenshots  have  been  used  in...

- 7 -  

Installing the software
● Before installing the software, quit all other open applications. 
1.  Double-click “Panasonic Device Programmer.zip.”
2.  Double-click “exe file”, then follow the instructions on the screen to install 
the software.
● Restart the computer once the installation is complete.
Disclaimer
Be sure to read before use. 
Limitations:
The  Device  Programmer  software  is  designed  to  be  used  to  configure  EYFR0  
(Assembly Qualifier) settings. 
Caution:
The following...

- 8 - 

5. Configure the settings as desired.
• Enter values and select settings.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
*  Valid only when (E) has been set to 2 (“Momentary”).  Setting a long relay output time slows the reception process.
•  File menu
1 Creates a new file.
2 Opens a previously created file.
3 Saves the current settings.
4 Saves the current settings as a new file.
5 Opens recently used files.
6 Exits the Device Programmer application.
• Product menu
1 Selects the Assembly Qualifier.  
(This...

- 9 -  

• Tools menu
Configures the port used to connect the Assembly 
Qualifier to the computer.
1 Selects the port.
2 Sets the baud rate.  
Initial setting: 9600
• About menu
Allows you to check the software’s version. 
Installing the Assembly Qualifier
Installation method
Mount the Assembly Qualifier securely with screws using the four mounting holes. 
NOTE
Before  mounting  the Assembly  Qualifier,  test  it  where  you  plan  to  install  it  to  ensure 
that there are no communications issues....

- 10 - 

III.	OPERATION
Registering the tool with the Assembly Qualifier
● Preparing the Assembly Qualifier
1.  Connect the power cord to the Assembly Qualifier.
.  Plug the power cord into a wall outlet.
3.  Turn on the Assembly Qualifier. 
 
All indicators will turn on and off, leaving only the power indicator on.
4.  Insert a soft key into the key lock and turn to the left. 
 
The power indicator will flash, and the Assembly Qualifier will enter tool 
registration standby mode.
● Preparing the...