Panasonic Aj Sdx900 Operating Instructions Manual

51
4
Chapter 4  Adjustments and settings for recording
4-9-3 How to use the user data
The setting data can be written in the user area of the unit’s
internal memory and data written in the memory can be read
from this area.
Use of this data speeds up the process of reproducing
suitable setup statuses.
To write the data, first perform a menu operation to open the
 screen from the FILE page, and to read the
user data that has been written, first perform a menu
operation to open the  screen from the FILE...

52
Chapter 4  Adjustments and settings for recording
< SCENE >
READ USER DATA
#SCENE SEL         :1
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
3When the JOG dial button is pressed, the scene file
number starts flashing.  Turn the JOG dial button to select
the scene file whose data is to be loaded.
6When the JOG dial button is pressed, the following
message appears.
WRITE?
YES
#NO
7Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG...

53
4
Chapter 4  Adjustments and settings for recording
RESET?
YES
#NO
< SCENE >
READ USER DATA
#SCENE SEL         :1
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
3When the JOG dial button is pressed, the scene file
number starts flashing.  Turn the JOG dial button to select
the scene file whose data is to be reset.
4Press the JOG dial button to enter the scene file.
5Turn the JOG dial button to move the arrow (cursor) to
the RESET item.
< SCENE >
READ USER...

54
Chapter 4  Adjustments and settings for recording
8When the JOG dial button is pressed, the arrow (cursor)
returns to the TITLE1, 2, 3 or 4 item.
9Turn the JOG dial button to move the arrow (cursor) to
the WRITE item.
WRITE?
YES
#NO
TITLE:
10When the JOG dial button is pressed, the following
message appears.
12Press the MENU button to exit the menu operations.
11Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The title is stored in the scene file area of the...

55
4
Chapter 4  Adjustments and settings for recording
4-9-5 How to return the menus
settings to the user
standard settings
The setting statuses of the unit’s menus can be returned to
the user standard settings registered in 4-9-3.  There are two
ways to do this: one method is to read (load) the USER DATA
as described in “4-9-3 How to use the user data” and the
other enables the return without performing any menu
operations.
Operation method without performing FILE
menu operations
4-9-6 How to return the...

56
Chapter 5  Preparation
5-1 Supplying the power
A battery pack or an AC power source can be used as this
unit’s power supply.
To use the battery pack, there is the following
choice of makes of batteries:
≥Panasonic
≥Anton-Bauer
≥IDX
≥PACO
≥Sony

≥Batteries of other makes can also be supported by changing
the setting menu but no guarantees are made for the
system when they are actually used with this unit.
≥Before using the battery pack, recharge the battery using
the battery charger.
(For details on...

57
Chapter 5  Preparation
5
Using the battery pack made by Panasonic
1Remove the battery holder.
Battery holder
2Attach the battery case to the unit.
1Connect the unit’s cable with the cable of the AU-
M402H battery case.
2Use a screwdriver to attach the AU-M402H battery
case to the unit.
The holes for tightening the screws can be seen when
the cover is opened and the rubber caps are raised.
Use a screwdriver to tighten the screws, and attach the
battery case to the unit.  Ensure that the screws are...

58
Chapter 5  Preparation
When using a battery pack made by Sony or
other company
When using the NP-1B or BP-90
Using the V-mount type battery pack
Attach the V-mount adapter plate.
Insert it in the direction shown by the arrows, and slide it into
place.
Please consult your local dealer for any questions regarding
the NP/BP adapter plate or V-mount adapter plate.
To set the battery, select the battery setting that corresponds
to the battery made by Sony or other company for the
BATTERY SELECT item on the...

59
Chapter 5  Preparation
5
5-1-2 Using an AC power supply
When the AJ-B75 AC adapter made by
Panasonic is used
1Connect the DC OUT connector on the AJ-B75 AC
adapter to the DC IN socket on the unit.
2Set the power of the AC adapter to ON.
3Set the unit’s power switch to ON.
When using an external power supply other than the AJ-
B75 AC adapter, check the pin signals of its external DC
input connector and use the polarities correctly.

≥Power from the AC adapter takes precedence when
both a battery pack...

60
Chapter 5  Preparation
5Proceed with the flange back adjustment for the lens.

≥For details on how to handle the lens, refer to the
operating instructions of the lens.
≥While the lens is removed, attach the mount cap to
protect the unit.
5-3Attaching the lens and
performing the flange
back and white shading
adjustments
Attaching the lens
1Raise the lever for securing the lens, and detach the
mount cap.
Lever for
securing the lens
Mount cap
Mark
2Align the center mark of the lens with the groove in...