Panasonic Aj Sd755 Operating Instructions Manual

31
Setup menus
1Press the MENU button.
2Press the REW button or FF button while holding
down the DIAG button to select the USER1 file.
4Turn the search dial while holding down the search
button to select the user file in which the contents
of USER1 are to be saved.Those user files which
have been set to the lock mode do not appear on
the display. If all the user files have been set to the
lock mode, the “LOCKED” display appears, and
the contents of USER1 cannot be saved into any of
the user files.
3Turn...

32
Setup menus
SYSTEM menu
No./Item Description
The underlined items indicates the initial setting.
00
WFM SELThis selects the signal to output from the
VIDEO OUT 2 connector.
0000 CTL:The CTL signal is output.0001 TC:The TIME CODE signal is
output.
0002VIDEO:The VIDEO OUT signal is
output.
0003 RF:The PB RF signal is output.0004 ENV:The PB ENV signal is output.

OThe settings can be changed at any time
regardless of the setup menu item No. 30
(MENU LOCK) setting.
ODuring normal playback, the output...

33
Setup menus
The underlined items indicates the initial setting.
SYSTEM menu
No./Item Description
18
SYS H
OFFSETSystem phase adjustment.
0000 –3:–13.4 µsec0001 –2:–8.96 µsec0002 –1:–4.52 µsec00030:0 sec0004 1:+4.52 µsec0005 2:+8.96 µsec0006 3:+13.4 µsec

Factory settings will remain unchanged even if an
attempt is
19
SYS SC/HThis sets whether the system phase is to be
adjusted by the unit or from the external
encoder remote controller.
0000REMOTE:
The system phase is adjusted from the
external encoder...

34
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
000
P-ROLL TIMEThis sets the preroll time.
The preroll time can be set from 0 to 15 seconds
in 1-second increments.
0000 0s
::
0005
5s::
0015 15s
001
LOCAL ENAThis selects the buttons which can be operated
on the front panel when the CONTROL switch
has been set to REMOTE.
0000 DIS:
No buttons can be operated.
0001ST&EJ:
Only the STOP and EJECT buttons can be
operated.
0002 ENA:
All buttons except for the...

35
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
015
MONI
CONTROLThis sets whether the recorder is to be
forcibly set to the EE mode and the player’s
playback signals are to be output to the
monitor by pressing the recorder’s PLAYER
button when a monitor has been connected
only to the recorder during deck-to-deck
editing.
0000MANU:
The recorder is not forcibly set to the EE mode.
0001 AUTO:
The recorder is forcibly set to the EE mode,
and the player’s...

36
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
100
SEARCH ENAThis selects the direct search dial operation.
0000DIAL:
For direct search dial operations.
0001 KEY:
Operation is not transferred to the search
mode unless the search button is pressed.
101
SHTL MAXThis sets the maximum speed for shuttle
operations.
0000a8.4:8.4anormal speed0001a16:16anormal speed0002a32:32anormal speed
102
FF. REW MAXThis sets the maximum speed for FF and
REW operations....

37
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
111
FRZ MODE
SELThis selects the output picture in the
STANDBY OFF (HALF LOADING) and EJECT
modes.
0000DIS:
The video output is muted.
0001 STB OFF:
When the STANDBY OFF (HALF LOADING)
mode is established, the picture being played
back at the time is frozen and output.
0002 SOF&EJ:
When the STANDBY OFF (HALF LOADING)
or EJECT mode is established, the picture
being played back at the time is frozen and...

38
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
114
REC INH
LAMPThis selects whether to cause the REC INH
lamp to flash or light up when the cassette
has been set to the accidental erasure
prevention status.
0000LIGHT:The lamp lights up.0001 FLASH:The lamp flashes.

When the REC INH switch is set to ON, the REC
INH lamp always lights regardless of the general
setting status.
115
EJECT SW
INHThis selects whether to enable or disable the
operation of the...

39
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
200
PARA RUNThis selects whether two or more VTRs are to
be operated in synchronization.
0000DIS:No operation in synchronization0001 ENA:Operation in synchronization

When operating two or more VTRs in
synchronization, set all the VTRs to ENA.
202
ID SELThis sets the ID information to be returned to
the controller.
0000 OTHER
0001DVCPRO0002 ORIG
OID information of any VTR except for the
DVCPRO’s is set in...

40
309
EDIT RPLCECThe same type of setting as setup menu No.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000N-DEF:
Not set.
0001 CH1:
Compliance with analog CH1 edit preset.
0002 CH2:
Compliance with analog CH2 edit preset.
0003 CH1+2:
Compliance with either analog CH1 or CH2
edit preset.
310
CONFI EDITThis selects whether to conduct simultaneous
playback while editing is in...