Panasonic Aj Lt85 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Lt85 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 31
DETAILED DESCRIPTION OF SET-UP MENUS 31 VV TT RR 12 Detailed description of set-up menus TIME CODE Item Setting Description of setting No. Item No. Item 507 TC MODE 0000 P-REC 0001 P-FREE 0002 I-REG0003 E-VITCªª0004 E-LTC 0005 VTR1 TC* 508 TC PRESET ªª 509 UB PRESET ªª 510 REGEN 0000AS&IN MODE 0001 ASSEM ª 0002 INSRT 0003 SW 511 TC JUMP 0000OFF 0001 VTR1 ª 0002 VTR2 0003 ALL 512 PHASE CORR 0000OFF 0001 ONªª 513 V-MON/ 0000V-MONTC OUT 0001 TCOUT1 0002 TCOUT2* ªª *The VTR1 TC and TCOUT2 settings can be...
Page 32
VIDEO Item Setting Description of setting No. Item No. Item 600 INPUT C 0000 B/W KILL 0001AUTOªª 601 OUT 0000N-VFVSYNC 0001 VFª 602 V-MUTE 0000 N-MUTE SEL 0001LOW_RFªª 603 CC (F1) 0000 BLANK BLANK 0001THRUªª 604 CC (F2) 0000 BLANK BLANK 0001THRUªª 605 FREEZE 0000FIELDSEL 0001 FRAME ªª 606 IN FRM 0000 FORCE DET 0001AUTOªª 607 VIN SETUP 0000THRU0001 CUTªª 608 VOUT SETUP 0000THRU0001 ADDªª The underlined number and item are the factory settings. DETAILED DESCRIPTION OF SET-UP MENUS 32 This selects the color...
Page 33
AUDIO Item Setting Description of setting No. Item No. Item 700 CH1 IN LV 0000 4dB 00010dBªª0002 Ð20dB 701 CH2 IN LV 0000 4dB 00010dBªª0002 Ð20dB 702 CH1 OUT LV 0000 4dB 00010dBªª0002 Ð20dB 703 CH2 OUT LV 0000 4dB 00010dBªª0002 Ð20dB 704 EMPHASIS 0000OFFªª001 ON 705 REC CUE 0000 CH1 0001 CH2 ªª0002CH1+2 706 CUE 0000OFFINSERT 0001 ONª The underlined number and item are the factory settings. 33 VV TT RR 12 Detailed description of set-up menus DETAILED DESCRIPTION OF SET-UP MENUS This selects the audio...
Page 34
AUDIO Item Setting Description of setting No. Item No. Item 707 DV 0000ST1OUTPUT 0001 ST2 0002 ST1+2ªª 708 PB FADE 0000AUTO0001 CUT 0002 FADEªª 709 AUDIO 0000PCMSLOW 0001 CUE 0002 A-CUE ªª 710 SHTL 0000OFFAUDIO 0001 CUEªª 711 AUTO 0000V1+V2MONI 0001 AUTO ª 712 DV PB 0000OFFATT 0001 ONªª 713 CH1 REC SEL 0000CH10001 CH2 0002 MIXª 714 CH2 REC SEL 0000 CH1 0001CH20002 MIXª The underlined number and item are the factory settings. DETAILED DESCRIPTION OF SET-UP MENUS 34 This selects the audio CH1 and CH2...
Page 35
SYSTEM Item Setting Description of setting No. Item No. Item 800 SCH 00000 COARSE 0001 90ªª0002 180 0003 270 801 SCH FINE 0000 Ð128 0128 0 ªª 0225 127 802 LCD CONT 0000 Ð30 0030 0 ªª 0060 30 803 LCD 0000 Ð30 COLOR 0030 0 ªª 0060 30 804 LCD 0000 Ð30 HUE 0030 0 ªª 0060 30 806 V OUT SEL 0000CMPST0001 CMPNTªª 807 CMPNT OUT LV 0000 MII0001B-CAMªª The underlined number and item are the factory settings. 35 VV TT RR 12 Detailed description of set-up menus DETAILED DESCRIPTION OF SET-UP...
Page 36
PREPARATION OF EDITING TAPE 36 The preparation of the tape for editing differs depending on whether assemble or insert editing is to be performed. The control signal (CTL) must be recorded on the tape before any attempt is made to edit. For assemble editing, the control signal is recorded at the start of the editing tape. (1st edit) !Press the IN button while holding down the ENTRY button to register the IN point of VTR2. The registered position is set 23 seconds before the time which is set by the 1ST...
Page 37
BASIC FLOW OF EDITING OPERATIONS 37 Editing operations basically involve the following steps. Simple operation mode Standard mode (1st edit)Prepare the editing tape in the recorder. 1. Edit mode selectionSelect assemble or insert editing. 2. Edit point registrationSet the edit IN and OUT points for the player and recorder. The points can be checked on the edit data setting display. Repeat steps 1 to 2 for a multiple number of events. (Preview)Before recording signals on the tape, conduct a rehearsal and...
Page 38
TYPES OF EDIT MODES AND ILLUSTRATIONS 38 nAssemble edit mode Signals are recorded continuously and successively from the start of usually a new tape (used tapes can also be used). This is the mode commonly used to make master tapes. ¥ In order to maintain the continuity of the time codes on the tape in the recorder, set set-up menu item No. 507 (TC MODE) to ÒI-REGÓ. When the setup menu No.507 is set to ÒP-RECÓ or ÒP-FREEÓ, set set-up menu item No. 510 (REGEN MODE) to ÒAS&INÓ or ÒASSEM.Ó nInsert edit...
Page 39
CUT EDITING PROCEDURE 39 1. Edit mode selection qFor assemble editing:Press the assemble (ASMBL) button. Record the video, audio (CH1, CH2) and time code simultane- ously. wFor insert editing:Press the insert buttons (V, A1, A2 and TC). These buttons correspond respectively to the video and audio signals. Press all the buttons for the signals which are to be edited. eTo clear a mode, press the same button again. Cut editing is a way of editing which uses a method to switch in an instant from one screen...
Page 40
CUT EDITING PROCEDURE 40 2. Edit point registration Search the scene to be edited using the search dial, and register the edit IN and OUT points using the IN and OUT buttons. !Play back the tape on the VTR (player or recorder) which is to be used to setting the edit points, and search the desired scene. @While holding down the ENTRY button at the desired scene, press the IN or OUT button corresponding to the edit point which is to be set. Depending on the edit point now set, the IN or OUT LED lights on...