Panasonic Aj Hdc27fp Operating Instructions Manual

111
VTR MAIN MENU screen
SUB menuVF
displayRemarks
FUNCTIONENG Index for opening the FUNCTION
screen.
BATTERY/
TAPEENG Index for opening the BATTERY/TAPE
screen.
BATTERY
SETTINGENG Index for opening the BATTERY
SETTING screen.
VTR VF
INDICATORENG Index for opening the VTR VF
INDICATOR screen.
MIC/AUDIOENG Index for opening the MIC/AUDIO
screen.
TC/UBENG Index for opening the TC/UB screen.
TIME/DATEENG Index for opening the TIME/DATE
screen.
VTR USER
MENU SELECTENG Index for opening the VTR USER
MENU...

112
Setting menu screens  VTR MAIN MENU
FUNCTION screen
The VTR’s functions are set on this screen.
ItemVariable
rangeRemarks
NEWS REC
MODEOFF0.2
:
2.0
VF
display
USER
ENGFor selecting the VTR
START button
acknowledgment time
during recording.
OFF:The pressing of the VTR
START button is
acknowledged
immediately, recording is
stopped, and the unit is set
to the REC PAUSE mode.
0.2—2.0:The pressing of the VTR
START button is not
acknowledged and
recording is continued for
the time set (in increments
of 0.2...

113
BATTERY/TAPE screen
The warning tone which signals the remaining battery
charge and remaining tape and which is heard during
shooting can be switched off if they prove to be
distracting.
ItemVariable
rangeRemarks
BATTERY
SELECTAJ-BP490
AU-BP402
HP-30A
PRO14
TRIM14
TRIM13
DIGITAL14
DIGITAL13
BP-H90
BP-H100
NP-L40NP-L40 DBP-L60/90NP-1B
VF
display
USER
ENGFor selecting the type of
battery used.
AJ-BP490:AJ-BP490
battery
AU-BP402:AU-BP402
battery
HP-30A:PACO HP-30A
battery 
PRO14:Anton/Bauer
PRO14...

114
Setting menu screens  VTR MAIN MENU
1. Either “¢
” or “≥” appears in front of each item to indicate whether
the item is set to ON or OFF.
¢
:ON
≥:OFF
2. Each time the JOG dial button is pressed, the setting moves in
the following sequence:
7
AUTO:The NEAR END voltage value preset in each battery
is used.
MANUAL:The NEAR END voltage setting for each battery can
be changed.
7
7
Item movement
NEAR END voltage setting
AUTO/MANUAL setting
ON/OFF setting
BATTERY SETTING screen
The type of battery to be...

115

The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
Setting menu screens  VTR MAIN MENU
The underlining in the variable range column indicates the setting in the preset mode.
ItemVariable
rangeRemarksVF
display
SAVE LEDSAVE&TAPESAVEUSER
ENGFor setting the operation
of the SAVE lamp.
SAVE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during...

116
Setting menu screens  VTR MAIN MENU
MIC/AUDIO screen
ItemVariable
rangeRemarksVF
displayItemVariable
rangeRemarksVF
display
MIC LOWCUT
CH2FRONT
REAR
F&R
OFFUSER
ENGFor setting the high-pass
filter for the CH2 mic input.
FRONT:The high-pass filter
for the front mic
input is set to ON.
REAR:The high-pass filter
for the rear mic
input is set to ON.
F&R:The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF:The high-pass filter
for the CH2 input
is set to OFF.
LIMITER ON
OFFUSER...

117
Setting menu screens  VTR MAIN MENU

When USER is set for the UB MODE item, it is not possible to set
EXT for the VITC UB MODE item.
Similarly, it is not possible to set EXT for the UB MODE item when
USER has been set for the VITC UB MODE item.
TC/UB screen
The time code and user’s bit settings are performed on
this screen.
ItemVariable
rangeRemarks
TC MODE DF
NDF
VF
displayItemVariable
rangeRemarksVF
display
USER
ENGFor setting the time code
to the DF or NDF mode.
DF:The time code is set
to the drop...

118
Setting menu screens  VTR MAIN MENU
The time code and user’s bit settings are performed on
this screen.
The underlining in the variable range column indicates the setting in the preset mode.
TC/UB screen
ItemVariable
rangeRemarksVF
display
VITC UB MODE USER
DATE
TIME
EXT
TCG
USER
ENGFor setting what is to be
written as the user’s bit in
the VITC area.
USER:User setting (fixed).DATE:Real time value for
year/month/day/
hours.
TIME:Real time value for
hours/minutes/
seconds.
EXT:The UBG value is...

119
TIME DATE screen
The time/date settings are performed on this screen.
ItemVariable
rangeRemarks
YEAR 00—02—99
VF
display
ENG For setting the year.
MONTH 1  —12ENG For setting the month.
DAY 1  —31ENG For setting the day.
HOUR 0  —23ENG For setting the hours.
MINUTE 0  —59ENG For setting the minutes.
$TIME/DATE
SET==ENG For entering the time and
date.
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens  VTR MAIN MENU
SUB menuVF
displayRemarks...

120
Setting menu screens  VTR USER MENU SELECT
ON (¢
) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU
screen.
The maximum number of VTR unit items which can be registered is 14.
FUNCTION screen
ItemVariable
rangeRemarks
NEWS REC
MODE¢
≥
VF
display
ENG For setting the registration
of the NEWS REC MODE
item on the USER MENU
screen.
HUMID OPE¢
≥ENG For setting the registration
of the HUMID OPE item
on the USER MENU
screen.
REC START¢
≥ENG For setting the...