Panasonic Aj Hd150 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hd150 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 71
– 71 – USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 714 CH1 IN0000 ANA SEL 0001 DIGI 715 CH2 IN0000ANA SEL 0001 DIGI 716 CH3 IN 0000 ANA SEL 0001 DIGI 717 CH4 IN 0000 ANA SEL 0001 DIGI 718 DIGI IN 0000 AES SEL12 0001 SDI 719 DIGI IN 0000 AES SEL34 0001 SDI 720 DIGI IN 0000 AES SEL56 0001 SDI 721 DIGI IN 0000 AES SEL78 0001 SDI 722 REC CH10000CH1 0001 CH2 0002 CH3 0003 CH4 0004 CH1+2 0005 CH3+4 723...
Page 72
– 72 – Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 724 REC CH3 0000 CH1 0001 CH2 0002CH3 0003 CH4 0004 CH1+2 0005 CH3+4 725 REC CH4 0000 CH1 0001 CH2 0002 CH3 0003CH4 0004 CH1+2 0005 CH3+4 726 REC CH50000CH5 0001 CH6 0002 CH7 0003 CH8 0004 CH5+6 0005 CH7+8 727 REC CH6 0000 CH50001CH6 0002 CH7 0003 CH8 0004 CH5+6 0005 CH7+8 728 REC CH7 0000 CH5 0001 CH6 0002CH7 0003 CH8 0004 CH5+6 0005 CH7+8 729 REC CH8 0000 CH5 0001 CH6 0002 CH7 0003CH8 0004...
Page 73
– 73 – USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 730 REC CUE0000CUE 0001 CH1 0002 CH2 0003 CH3 0004 CH4 0005 CH5 0006 CH6 0007 CH7 0008 CH8 0009 CH1+2 0010 CH3+4 0011 CH5+6 0012 CH7+8 0013 CH1-CH8 732 EMBEDDED 0000 OFF AUD0001 ON 733 SD EMBD 0000 OFF AUD0001 ON 734 MONITOR 0000 OFF MIX L 0001 CH1+2 0002 CH3+4 0003 CH1+3 0004 CH2+4 0005 CH5+6 0006 CH7+8 0007 CH5+7 0008 CH6+8 735 MONITOR 0000 OFF MIX R 0001 CH1+2...
Page 74
– 74 – Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 736 CUE SLOW 0000 STEP 0001 LINEAR 737 CH1 CUE0000 OFF SEL 0001 ON 738 CH2 CUE0000 OFF SEL 0001 ON 739 CH3 CUE0000 OFF SEL 0001 ON 740 CH4 CUE0000 OFF SEL 0001 ON 741 CH5 CUE0000 OFF SEL 0001 ON 742 CH6 CUE0000 OFF SEL 0001 ON 743 CH7 CUE0000 OFF SEL 0001 ON 744 CH8 CUE0000 OFF SEL 0001 ON The underline on the...
Page 75
– 75 – USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 745 MONI CH 0000 MANU SEL 0001 AUTO1 0002 AUTO2 0003 AUTO11 0004 AUTO21 746 MONI AUTO0000 L/R SEL 0001 L 0002 R 747 MONI SEL0000 OFF INH 0001 ON 0002 ON1 748 AUDIO PB0000 DIS VR 0001 ENA 749 ANA CH10000 CH1 SEL 0001 CH5 750 ANA CH20000 CH2 SEL 0001 CH6 751 ANA CH30000 CH3 SEL 0001 CH7 752 ANA CH40000 CH4 SEL 0001 CH8 753 SD SDI CH10000...
Page 76
– 76 – Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 757 JOG PROG 0000 OFF0001 ON 758 DV PB ATT0000 OFF 0001 ON 759 REC PT0000 OFF MUTE 0001 ON The underline on the setting item denotes the initial setting. This selects the slow signal processing for the digital audio output in the JOG, VAR or SHTL mode. 0: Sound which has not been subjected to the digital audio slow signal...
Page 77
– 77 – USER menu Item Setting No.SuperimposedNo.SuperimposedDescription display display A00 LOAD0000USER2 0001 USER3 0002 USER4 0003 USER5 A01 SAVE0000USER2 0001 USER3 0002 USER4 0003 USER5 0004 LOCKED A02 P.ON LOAD0000OFF 0001 USER2 0002 USER3 0003 USER4 0004 USER5 A03 MENU LOCK0000OFF 0001 ON The underline on the setting item denotes the initial setting. • No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can be set only for USER1. They are not displayed with the USER2...
Page 78
– 78 – Time code/user bit Time code The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are to be read by the time code reader (time code signal reader), and the absolute position of the tape is to be displayed in increments of hours, minutes, seconds and frames. The time code is written in the sub-code area (data area) of the helical track. This enables insert editing to be conducted independently...
Page 79
– 79 – Recording internal/external time codes 1. Setting the internal time code 1Place the VTR in the stop mode. 2Set the TC/CTL switch to TC. 3Set the TC INT/EXT switch to INT. (Internal time code selected) 4Set the Setup menu No. 504 (RUN MODE). REC RUN:The time code runs at the same time as the recording proceeds. FREE RUN:The time code runs in the same way as the time regardless of the VTR’s operation. 5Set the Setup menu No. 503 (REGEN). REGEN:Continuity is maintained with the recorded time code...
Page 80
– 80 – Reproducing the time code/user bit 1Place the unit in the stop mode. 2Set the TC/CTL button to TC. 3Set the TC/UB switch to TC or UB. TC:The time code is displayed. UB:The user bit is displayed. •When it is no longer possible to read the time code, it is interpolated using the CTL signal. 4Press the PLAY button. Playback now commences, and the time code appears on the display. When setup menu No. 005 (SUPER) is ON, the time code value is superimposed onto the video signal from the VIDEO OUT3...